Search by rim modifications

A car's Make is the brand of the vehicle. You can use GET /makes/ to get a list of available slug values. (e.g. mitsubishi)

The particular Model of the brand. You can use GET /models/ to get a list of available slug values. (e.g. outlander)

Bolt pattern is expressed as the number of lugs by the diameter of an imaginary circle formed by the centers of the wheel lugs. You can use GET /by_rim/bp/ to get a list of available value values. (e.g. 5x114.3)

Rim diameter is the distance measured in inches across the face of the wheel, from bead seat to bead seat. You can use GET /by_rim/rd/ to get a list of available value values. (e.g. 19)

Minimum rim diameter value. If set, rim_diameter value should be empty and rim_diameter_max should be defined. Value difference between rim_diameter_min and rim_diameter_max must be equal to or less than 3. (e.g. 19)

Maximum rim diameter value. If set, rim_diameter value should be empty and rim_diameter_min should be defined. Value difference between rim_diameter_min and rim_diameter_max must be equal to or less than 3. (e.g. 21)

Rim width is the distance measured in inches from bead seat to bead seat. You can use GET /by_rim/rw/ to get a list of available value values. (e.g. 7.5)

Minimum rim width value. If set, rim_width value should be empty and rim_width_max should be defined. Value difference between rim_width_max and rim_width_min must be equal to or less than 2.0. (e.g. 7.0)

Maximum rim width value. If set, rim_width value should be empty and rim_width_min should be defined. Value difference between rim_width_max and rim_width_min must be equal to or less than 2.0. (e.g. 8.0)

Rim offset is a distance between wheel mounting surface where it is bolted to hub and the centerline of rim. You can use GET /by_rim/of/ to get a list of available value values. (e.g. 38)

Minimum rim offset value. If set, rim_offset value should be empty and rim_offset_max should be defined. Value difference between rim_offset_max and rim_offset_min must be equal to or less than 50. (e.g. 33)

Maximum rim offset value. If set, rim_offset value should be empty and rim_offset_min should be defined. Value difference between rim_offset_max and rim_offset_min must be equal to or less than 50. (e.g. 53)

Centre bore value, mm (e.g. 60)

Minimum centre bore value. If set, cb value should be empty and cb_max should be defined. Value difference between cb_max and cb_min must be equal to or less than 50. (e.g. 60)

Maximum centre bore value. If set, cb value should be empty and cb_min should be defined. Value difference between cb_max and cb_min must be equal to or less than 50. (e.g. 75)

A Region is the region where the car was officially sold or is still being sold. You can use GET /regions/ to get a list of available slug values. (e.g. usdm)

The Mode is used to set the search mode for data on the axes of wheelpairs. By default, the search uses the axles of the front and rear wheelset. Mode possible values: both, front_only or rear_only. (e.g. both)

Only show cars with Wheel Configurator templates.

Comma-separated list without spaces. Supported field names: make, model, trim, start_year, end_year

Maximum number of results to return (0–100).

Number of results to skip for pagination.