/

/HTTP API Console

Changes Docs Sign in

APIs
Generators
Stacks
Projects

Docs
History
Schema

Checked 15h ago · Updated 3d ago

Filter operations

Msg101

postUpdateParams defines a (governance) operation for updating the x/auth module parameters. The authority defaults to the x/gov module account.
postExec attempts to execute the provided messages using authorizations granted to the grantee. Each message should have only one signer corresponding to the granter of the authorization.
postGrant grants the provided authorization to the grantee on the granter's account with the provided expiration time. If there is already a grant for the given (granter, grantee, Authorization) triple, then the grant will be overwritten.
postRevoke revokes any authorization corresponding to the provided method name on the granter's account that has been granted to the grantee.
postMultiSend defines a method for sending coins from some accounts to other accounts.
postSend defines a method for sending coins from one account to another account.
postSetSendEnabled is a governance operation for setting the SendEnabled flag on any number of Denoms. Only the entries to add or update should be included. Entries that already exist in the store, but that aren't included in this message, will be left unchanged.
postUpdateParams defines a governance operation for updating the x/bank module parameters. The authority is defined in the keeper.
postUpdateParams defines a governance operation for updating the x/consensus module parameters. The authority is defined in the keeper.
postUpdateParams defines a governance operation for updating the x/crisis module parameters. The authority is defined in the keeper.
postVerifyInvariant defines a method to verify a particular invariant.
postCommunityPoolSpend defines a governance operation for sending tokens from the community pool in the x/distribution module to another account, which could be the governance module itself. The authority is defined in the keeper.
postDepositValidatorRewardsPool defines a method to provide additional rewards to delegators to a specific validator.
postFundCommunityPool defines a method to allow an account to directly fund the community pool.
postSetWithdrawAddress defines a method to change the withdraw address for a delegator (or validator self-delegation).
postUpdateParams defines a governance operation for updating the x/distribution module parameters. The authority is defined in the keeper.
postWithdrawDelegatorReward defines a method to withdraw rewards of delegator from a single validator.
postWithdrawValidatorCommission defines a method to withdraw the full commission to the validator address.
postSubmitEvidence submits an arbitrary Evidence of misbehavior such as equivocation or counterfactual signing.
postGrantAllowance grants fee allowance to the grantee on the granter's account with the provided expiration time.
postPruneAllowances prunes expired fee allowances, currently up to 75 at a time.
postRevokeAllowance revokes any fee allowance of granter's account that has been granted to the grantee.
postCancelProposal defines a method to cancel governance proposal
postDeposit defines a method to add deposit on a specific proposal.
postExecLegacyContent defines a Msg to be in included in a MsgSubmitProposal to execute a legacy content-based proposal.
postSubmitProposal defines a method to create new proposal given the messages.
postUpdateParams defines a governance operation for updating the x/gov module parameters. The authority is defined in the keeper.
postVote defines a method to add a vote on a specific proposal.
postVoteWeighted defines a method to add a weighted vote on a specific proposal.
postDeposit defines a method to add deposit on a specific proposal.
postSubmitProposal defines a method to create new proposal given a content.
postVote defines a method to add a vote on a specific proposal.
postVoteWeighted defines a method to add a weighted vote on a specific proposal.
postUpdateParams defines a governance operation for updating the x/mint module parameters. The authority is defaults to the x/gov module account.
postUnjail defines a method for unjailing a jailed validator, thus returning them into the bonded validator set, so they can begin receiving provisions and rewards again.
postUpdateParams defines a governance operation for updating the x/slashing module parameters. The authority defaults to the x/gov module account.
postBeginRedelegate defines a method for performing a redelegation of coins from a delegator and source validator to a destination validator.
postCancelUnbondingDelegation defines a method for performing canceling the unbonding delegation and delegate back to previous validator.
postCreateValidator defines a method for creating a new validator.
postDelegate defines a method for performing a delegation of coins from a delegator to a validator.
postEditValidator defines a method for editing an existing validator.
postUndelegate defines a method for performing an undelegation from a delegate and a validator.
postUpdateParams defines an operation for updating the x/staking module parameters. Since: cosmos-sdk 0.47
postAddCodeUploadParamsAddresses defines a governance operation for adding addresses to code upload params. The authority is defined in the keeper.
postClearAdmin removes any admin stored for a smart contract
postExecute submits the given message data to a smart contract
postInstantiateContract creates a new smart contract instance for the given code id.
postInstantiateContract2 creates a new smart contract instance for the given code id with a predictable address
postMigrate runs a code upgrade/ downgrade for a smart contract
postPinCodes defines a governance operation for pinning a set of code ids in the wasmvm cache. The authority is defined in the keeper.
postRemoveCodeUploadParamsAddresses defines a governance operation for removing addresses from code upload params. The authority is defined in the keeper.
postStoreAndInstantiateContract defines a governance operation for storing and instantiating the contract. The authority is defined in the keeper.
postStoreAndMigrateContract defines a governance operation for storing and migrating the contract. The authority is defined in the keeper.
postStoreCode to submit Wasm code to the system
postSudoContract defines a governance operation for calling sudo on a contract. The authority is defined in the keeper.
postUnpinCodes defines a governance operation for unpinning a set of code ids in the wasmvm cache. The authority is defined in the keeper.
postUpdateAdmin sets a new admin for a smart contract
postUpdateContractLabel sets a new label for a smart contract
postUpdateInstantiateConfig updates instantiate config for a smart contract
postUpdateParams defines a governance operation for updating the x/wasm module parameters. The authority is defined in the keeper.
postPayPacketFee defines a rpc handler method for MsgPayPacketFee PayPacketFee is an open callback that may be called by any module/user that wishes to escrow funds in order to incentivize the relaying of the packet at the next sequence NOTE: This method is intended to be used within a multi msg transaction, where the subsequent msg that follows initiates the lifecycle of the incentivized packet
postPayPacketFeeAsync defines a rpc handler method for MsgPayPacketFeeAsync PayPacketFeeAsync is an open callback that may be called by any module/user that wishes to escrow funds in order to incentivize the relaying of a known packet (i.e. at a particular sequence)
postRegisterCounterpartyPayee defines a rpc handler method for MsgRegisterCounterpartyPayee RegisterCounterpartyPayee is called by the relayer on each channelEnd and allows them to specify the counterparty payee address before relaying. This ensures they will be properly compensated for forward relaying since the destination chain must include the registered counterparty payee address in the acknowledgement. This function may be called more than once by a relayer, in which case, the latest counterparty payee address is always used.
postRegisterPayee defines a rpc handler method for MsgRegisterPayee RegisterPayee is called by the relayer on each channelEnd and allows them to set an optional payee to which reverse and timeout relayer packet fees will be paid out. The payee should be registered on the source chain from which packets originate as this is where fee distribution takes place. This function may be called more than once by a relayer, in which case, the latest payee is always used.
postRegisterInterchainAccount defines a rpc handler for MsgRegisterInterchainAccount.
postSendTx defines a rpc handler for MsgSendTx.
postUpdateParams defines a rpc handler for MsgUpdateParams.
postUpdateParams defines a rpc handler for MsgUpdateParams.
postCreateClient defines a rpc handler method for MsgCreateClient.
postIBCSoftwareUpgrade defines a rpc handler method for MsgIBCSoftwareUpgrade.
postRecoverClient defines a rpc handler method for MsgRecoverClient.
postSubmitMisbehaviour defines a rpc handler method for MsgSubmitMisbehaviour.
postUpdateClient defines a rpc handler method for MsgUpdateClient.
postUpdateClientParams defines a rpc handler method for MsgUpdateParams.
postUpgradeClient defines a rpc handler method for MsgUpgradeClient.
postConnectionOpenAck defines a rpc handler method for MsgConnectionOpenAck.
postConnectionOpenConfirm defines a rpc handler method for MsgConnectionOpenConfirm.
postConnectionOpenInit defines a rpc handler method for MsgConnectionOpenInit.
postConnectionOpenTry defines a rpc handler method for MsgConnectionOpenTry.
postUpdateConnectionParams defines a rpc handler method for MsgUpdateParams.
postBridge relays Warden data via GMP.
postSetParams sets the parameters for the gmp module.
postAdd an approval to an existing Action.
postNewAction creates a new Action.
postCreate a new intent.
postRevoke an existing Action while in pending state.
postUpdate an existing intent name and definition.
postUpdateParams defines a (governance) operation for updating the module parameters. The authority defaults to the x/gov module account.
postAdd a new party to a keychain. Transactions coming from this party will be considered trusted by the keychain.
postAdd a new owner to a space.
postFulfill a signature request
postRequest a new key to a keychain, the key will belong to the specified space.
postCreate a new keychain. The user will be the first admin of the keychain.
postRequest a new signature
postCreate a new Space. The creator will be the first owner of the Space.
postRemove an owner from the space. The user can remove itself, but at least one owner must be left.
postUpdate informations of a Key.
postUpdate an existing request by writing a result into it. This method is called by a keychain party.
postUpdate a keychain, e.g. update the status or description.
postUpdateParams defines a (governance) operation for updating the module parameters. The authority defaults to the x/gov module account.
postUpdate a space, e.g. changing the intents in use.

Query14

Service2

Msg

MultiSend defines a method for sending coins from some accounts to other accounts.

post/cosmos.bank.v1beta1.Msg/MultiSend

Request body

Response

A successful response.

Changes