BLbluestaq
Sensor

GET /udl/sensorcalibration/{id}

Changed on

Service operation to get a single SensorCalibration by its unique ID passed as a path parameter.

Request

  • Base URL
    https://unifieddatalibrary.com
  • URL
    https://unifieddatalibrary.com/udl/sensorcalibration/{id}
  • Auth
    none declared

Path parameters

idstring required

The ID of the SensorCalibration to retrieve.

Query parameters

firstResultinteger
maxResultsinteger

Response

OK

idstring

Unique identifier of the record, auto-generated by the system if not provided on create operations.

classificationMarkingstring required

Classification marking of the data in IC/CAPCO Portion-marked format.

idSensorstring required

Unique identifier of the sensor to which this calibration data applies. This ID can be used to obtain additional information on a sensor using the 'get by ID' operation (e.g. /udl/sensor/{id}). For example, the sensor with idSensor = abc would be queried as /udl/sensor/abc.

senTypestring

The sensor type (MECHANICAL, OPTICAL, PHASED ARRAY, RF).

calTypestring

The basis of calibration values contained in this record (COMPUTED, OPERATIONAL).

calTrackModestring

Specifies that the calibration data are from INTRA_TRACK or INTER_TRACK residuals.

durationnumber double

Duration of the sensor calibration data which produced these values, measured in days.

startTimestring date-time required

Calibration data span start time in ISO 8601 UTC format with millisecond precision.

endTimestring date-time

Calibration data span end time in ISO 8601 UTC format with millisecond precision. If provided, the endTime must be greater than or equal to the startTime in the SensorCalibration record.

ecrnumber[]

Three element array, expressing the sensor location in Earth Centered Rotating (ECR) coordinates, in kilometers. The array element order is [x, y, z].

numObsinteger

The total number of observables available over the calibration span.

numTracksinteger

The total number of tracks available over the calibration span.

numTimeObsinteger

The number of observables used in determining the time calibration values.

timeBiasnumber double

Sensor time bias, in seconds.

timeBiasSigmanumber double

The standard deviation of the time residuals, in seconds, used to determine the sensor time bias.

numRangeObsinteger

The number of observables used in determining the range calibration values.

numRangeRateObsinteger

The number of observables used in determining the range rate calibration values.

rangeBiasnumber double

Sensor range bias, in kilometers.

rangeRateBiasnumber double

Sensor range rate bias, in kilometers per second.

rangeAccelBiasnumber double

Sensor range rate acceleration bias, in kilometers per second squared.

rangeSigmanumber double

The standard deviation of the range residuals, in kilometers, used to determine the sensor range bias.

rangeRateSigmanumber double

The standard deviation of the range rate residuals, in kilometers per second, used to determine the sensor range rate bias.

rangeRmsnumber double

The root mean square of the range residuals, in kilometers, used to determine the sensor range bias.

rangeRateRmsnumber double

The root mean square of the range rate residuals, in kilometers per second, used to determine the sensor range rate bias.

rangeAccelSigmanumber double

The standard deviation of the range acceleration residuals, in kilometers per second squared, used to determine the sensor range acceleration bias.

calAngleRefstring

Specifies the calibration reference angle set for this calibration data set. Azimuth and Elevation (AZEL) or Right Ascension and Declination (RADEC).

numAzRaObsinteger

The number of observables used in determining the azimuth or right-ascension calibration values.

azRaRmsnumber double

The root mean square of the azimuth/right-ascension residuals, in degrees, used to determine the sensor azimuth/right-ascension bias.

azRaBiasnumber double

Sensor azimuth/right-ascension bias, in degrees.

azRaSigmanumber double

The standard deviation of the azimuth/right ascension residuals, in degrees, used to determine the sensor azimuth/right-ascension bias.

azRaRateBiasnumber double

Sensor azimuth/right-ascension rate bias, in degrees per second.

azRaAccelBiasnumber double

Sensor azimuth/right-ascension acceleration bias, in degrees per second squared.

azRaRateSigmanumber double

The standard deviation of the azimuth/right ascension rate residuals, in degrees, used to determine the sensor azimuth/right-ascension rate bias.

azRaAccelSigmanumber double

The standard deviation of the azimuth/right ascension acceleration residuals, in degrees, used to determine the sensor azimuth/right-ascension acceleration bias.

numElDecObsinteger

The number of observables used in determining the elevation or declination calibration values.

elDecRmsnumber double

The root mean square of the elevation/declination residuals, in degrees, used to determine the sensor elevation/declination bias.

elDecBiasnumber double

Sensor elevation/declination bias, in degrees.

elDecSigmanumber double

The standard deviation of the elevation/declination residuals, in degrees, used to determine the sensor elevation/declination bias.

elDecRateBiasnumber double

Sensor elevation/declination rate bias, in degrees per second.

elDecAccelBiasnumber double

Sensor elevation/declination acceleration bias, in degrees per second squared.

elDecRateSigmanumber double

The standard deviation of the elevation/declination rate residuals, in degrees, used to determine the sensor elevation/declination rate bias.

elDecAccelSigmanumber double

The standard deviation of the elevation/declination acceleration residuals, in degrees, used to determine the sensor elevation/declination acceleration bias.

numPhotoObsinteger

The number of observables used in determining the photometric calibration values.

photoBiasnumber double

The sensor photometric observation magnitude bias, in visual magnitude.

photoSigmanumber double

The standard deviation of the magnitude residuals, in visual magnitude, used to determine the photometric bias.

numRcsObsinteger

The number of observables used in determining the radar cross section (RCS) calibration values.

rcsBiasnumber double

The sensor radar cross section (RCS) observation bias, in square meters.

rcsSigmanumber double

The standard deviation of the radar cross section residuals, in square meters, used to determine the radar cross section bias.

refTypestring

The reference type used in the calibration.

refTargetsstring[]

Array of the catalog IDs of the reference targets used in the calibration.

confidenceNoiseBiasnumber double

The confidence noise bias of the duration span.

createdAtstring date-time

Time the row was created in the database, auto-populated by the system.

createdBystring

Application user who created the row in the database, auto-populated by the system.

sourceDLstring

The source data library from which this record was received. This could be a remote or tactical UDL or another data library. If null, the record should be assumed to have originated from the primary Enterprise UDL.

sourcestring required

Source of the data.

originstring

Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.

origNetworkstring

The originating source network on which this record was created, auto-populated by the system.

dataMode'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE' required

Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data:

REAL: Data collected or produced that pertains to real-world objects, events, and analysis.

TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics.

EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data.

SIMULATED: Synthetic data generated by a model to mimic real-world datasets.

Example response

{
  "id": "026dd511-8ba5-47d3-9909-836149f87686",
  "classificationMarking": "U",
  "idSensor": "09f2c68c-5e24-4b72-9cc8-ba9b1efa82f0",
  "senType": "PHASED ARRAY",
  "calType": "OPERATIONAL",
  "calTrackMode": "INTRA_TRACK",
  "duration": 14.125,
  "startTime": "2018-01-01T16:00:00.123Z",
  "endTime": "2018-01-14T16:00:00.123Z",
  "ecr": [
    352815.1,
    -5852915.3,
    3255189
  ],
  "numObs": 341,
  "numTracks": 85,
  "numTimeObs": 307,
  "timeBias": 0.000372,
  "timeBiasSigma": 15.333212,
  "numRangeObs": 341,
  "numRangeRateObs": 341,
  "rangeBias": 0.024777,
  "rangeRateBias": 0.105333,
  "rangeAccelBias": 0.123,
  "rangeSigma": 0.042644,
  "rangeRateSigma": 0.000321,
  "rangeRms": 0.0123,
  "rangeRateRms": 0.000227,
  "rangeAccelSigma": 0.0123,
  "calAngleRef": "AZEL",
  "numAzRaObs": 339,
  "azRaRms": 0.605333,
  "azRaBias": 0.327883,
  "azRaSigma": 0.000381,
  "azRaRateBias": 0.123,
  "azRaAccelBias": 0.0123,
  "azRaRateSigma": 0.123,
  "azRaAccelSigma": 0.0123,
  "numElDecObs": 339,
  "elDecRms": 0.080505,
  "elDecBias": 0.012555,
  "elDecSigma": 0.00265,
  "elDecRateBias": 0.123,
  "elDecAccelBias": 0.0123,
  "elDecRateSigma": 0.123,
  "elDecAccelSigma": 0.0123,
  "numPhotoObs": 77,
  "photoBias": 0.123,
  "photoSigma": 0.0123,
  "numRcsObs": 325,
  "rcsBias": 0.123,
  "rcsSigma": 0.0123,
  "refType": "SLR",
  "refTargets": [
    "xx",
    "yy",
    "zz"
  ],
  "confidenceNoiseBias": 0.001477,
  "createdAt": "2018-01-01T16:00:00.123Z",
  "createdBy": "some.user",
  "sourceDL": "AXE",
  "source": "Bluestaq",
  "origin": "THIRD_PARTY_DATASOURCE",
  "origNetwork": "OPS1",
  "dataMode": "TEST"
}

Changes

  • 4e1cbc17e814Revision changes
    • warning

      removed the optional property from the response with the status

    • warning

      removed the optional property from the response with the status

    • warning

      removed the optional property from the response with the status

    • warning

      removed the optional property from the response with the status

    • warning

      removed the optional property from the response with the status

    • warning

      removed the optional property from the response with the status

    • info

      added the new optional query request parameter firstResult

    • info

      added the new optional query request parameter maxResults

    • info

      added the optional property to the response with the status

    • info

      added the optional property to the response with the status

    • info

      added the optional property to the response with the status

    • info

      added the optional property to the response with the status

    • info

      added the optional property to the response with the status

    • info

      added the optional property to the response with the status

  • 75f764c843a9Revision changes
    • info

      endpoint added

Some revisions have not been checked yet.