BLbluestaq
Observation

POST /filedrop/udl-ecpsdr

Changed on

Service operation to take multiple ECPSDR as a POST body and ingest into the database. This operation is intended to be used for automated feeds into UDL. A specific role is required to perform this service operation. Please contact the UDL team for assistance.

Request

  • Base URL
    https://unifieddatalibrary.com
  • URL
    https://unifieddatalibrary.com/filedrop/udl-ecpsdr
  • Auth
    none declared

Request body

idstring

Unique identifier of the record, auto-generated by the system.

classificationMarkingstring required

Classification marking of the data in IC/CAPCO Portion-marked format.

idOnOrbitstring

Unique identifier of the on-orbit satellite hosting the sensor.

satNointeger

Satellite/catalog number of the on-orbit satellite hosting the sensor.

origObjectIdstring

Optional identifier provided by the record source to indicate the satellite hosting the sensor. This may be an internal identifier and not necessarily map to a valid satellite number.

idSensorstring

Unique identifier of the reporting sensor.

origSensorIdstring

Optional identifier provided by the record source to indicate the sensor identifier which produced this data. This may be an internal identifier and not necessarily a valid sensor ID.

typestring required

The type of data associated with this record (STANDARD, TRANSIENT).

msgTimestring date-time required

Time stamp of time packet receipt on ground, in ISO 8601 UTC format with millisecond precision.

obTimestring date-time

Time of the observation, in ISO 8601 UTC format with millisecond precision.

retransmitboolean

Flag indicating whether this record is an original or re-transmitted dataset (TRUE indicates a retransmit from the host).

senModestring

The sensor mode associated with this measurements (NORMAL, TEST).

dosBiasinteger

Unitless dosimeter detector bias for MedLET and HiLET. MedLET (Linear Energy Transfer) and HiLET subsensors detect particles above LET thresholds, 300keV and 1MeV, respectively.

asl5VCurrMoninteger

Internal 5V current monitor for analog supply line. This is sensor status telemetry. See vRef for conversion factor to Volts.

dsl5VCurrMoninteger

Internal 5V current monitor for digital supply line. This is sensor status telemetry. See vRef for conversion factor to Volts.

psTempMoninteger

Power supply temperature monitor. This is sensor status telemetry.

cdsPlateVMoninteger

CDS Charge Plate voltage monitor. See vRef for conversion factor to Volts.

cdsRefVMoninteger

CDS reference voltage monitor. See vRef for conversion factor to Volts.

mpTempinteger

Unitless sensor mounting plate temperature.

vRefinteger

Reference voltage (volts/bit). Conversion factor used to convert analog V monitor data from bytes to volts.

pd1SigLevinteger

Photodiode 1 signal level.

pd2SigLevinteger

Photodiode 2 signal level.

esdTrigCountLinteger

Number of ESD triggers, low byte of 2-byte counter.

esdTrigCountHinteger

Number of ESD triggers, high byte of 2-byte counter.

lowLetLinteger

LowLET dosimeter low range output. Low byte of (LowLET) dosimeter output.

lowLetMinteger

LowLET dosimeter medium range output. Medium byte of (LowLET) dosimeter output.

medLet1Linteger

MedLET1 dosimeter low range output. Low byte of the 1st (MedLET) dosimeter output.

medLet1Minteger

MedLET1 dosimeter medium range output. Medium byte of the 1st (MedLET) dosimeter output.

medLet2Linteger

MedLET2 dosimeter low range output. Low byte of the 2nd (MedLET) dosimeter output.

medLet2Minteger

MedLET2 dosimeter medium range output. Medium byte of the 2nd (MedLET) dosimeter output.

medLet3Linteger

MedLET3 dosimeter low range output. Low byte of the 3rd (MedLET) dosimeter output.

medLet3Minteger

MedLET3 dosimeter medium range output. Medium byte of the 3rd (MedLET) dosimeter output.

medLet4Linteger

MedLET4 dosimeter low range output. Low byte of the 4th (MedLET) dosimeter output.

medLet4Minteger

MedLET4 dosimeter medium range output. Medium byte of the 4th (MedLET) dosimeter output.

hiLetLinteger

HiLET dosimeter low range output. Low byte of scaler (HiLET) dosimeter output.

hiLetMinteger

Unitless HiLET dosimeter medium range output. Medium byte of (HiLET) dosimeter output.

surfDosLinteger

Surface dosimeter low range output (converts to pico-coulombs/bit). Low byte of 3 bytes.

surfDosMinteger

Surface dosimeter medium range output (converts to pico-coulombs/bit). Middle byte of 3 bytes.

surfDosHinteger

Surface dosimeter high range output (converts to pico-coulombs/bit). High byte of 3 bytes.

surfDosChargeLinteger

Surface dosimeter charge rate low output (converts to pico-amps/bit). Low byte of 2 bytes.

surfDosChargeHinteger

Surface dosimeter charge rate high output (converts to pico-amps/bit). High byte of 2 bytes.

surfDosStatinteger

Surface dosimeter status byte.

cdsThrottleinteger

CDS throttle number of seconds between CDS transient capture readouts.

cdsThresholdinteger

CDS Threshold setting for ESD detection threshold. The CDS Threshold is the adjustable sensitivity of recording/digitizing an ESD as a transient packet.

checksuminteger

Two byte CRC-16-CCITT checksum (ordered as first byte, second byte).

transientDatainteger[]

Array of 144 digitized samples of ESD waveform for transient packets.

createdAtstring date-time

Time the row was created in the database, auto-populated by the system.

createdBystring

Application user who created the row in the database, auto-populated by the system.

sourcestring required

Source of the data.

originstring

Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.

origNetworkstring

The originating source network on which this record was created, auto-populated by the system.

dataMode'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE' required

Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data:

REAL: Data collected or produced that pertains to real-world objects, events, and analysis.

TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics.

EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data.

SIMULATED: Synthetic data generated by a model to mimic real-world datasets.

Example request

[
  {
    "id": "ECPSDR-ID",
    "classificationMarking": "U",
    "idOnOrbit": "ONORBIT-ID",
    "satNo": 101,
    "origObjectId": "ORIGOBJECT-ID",
    "idSensor": "SENSOR-ID",
    "origSensorId": "ORIGSENSOR-ID",
    "type": "STANDARD",
    "msgTime": "2018-01-01T16:00:00.123Z",
    "obTime": "2018-01-01T16:00:00.123Z",
    "retransmit": true,
    "senMode": "TEST",
    "dosBias": 12,
    "asl5VCurrMon": 12,
    "dsl5VCurrMon": 12,
    "psTempMon": 12,
    "cdsPlateVMon": 12,
    "cdsRefVMon": 12,
    "mpTemp": 12,
    "vRef": 12,
    "pd1SigLev": 12,
    "pd2SigLev": 12,
    "esdTrigCountL": 12,
    "esdTrigCountH": 12,
    "lowLetL": 2,
    "lowLetM": 2,
    "medLet1L": 2,
    "medLet1M": 2,
    "medLet2L": 2,
    "medLet2M": 2,
    "medLet3L": 2,
    "medLet3M": 2,
    "medLet4L": 2,
    "medLet4M": 2,
    "hiLetL": 2,
    "hiLetM": 2,
    "surfDosL": 12,
    "surfDosM": 12,
    "surfDosH": 12,
    "surfDosChargeL": 12,
    "surfDosChargeH": 12,
    "surfDosStat": 2,
    "cdsThrottle": 12,
    "cdsThreshold": 12,
    "checksum": 12,
    "transientData": [
      1,
      2,
      3
    ],
    "createdAt": "2018-01-01T16:00:00.123Z",
    "createdBy": "some.user",
    "source": "Bluestaq",
    "origin": "THIRD_PARTY_DATASOURCE",
    "origNetwork": "OPS1",
    "dataMode": "TEST"
  }
]

Response

Accepted

Changes

Some revisions have not been checked yet.