--- title: "List subscriptions" method: GET path: "/v1/subscriptions" --- # List subscriptions `GET /v1/subscriptions` By default, returns a list of subscriptions that have not been canceled. In order to list canceled subscriptions, specify `status=canceled`. ## Query parameters - `automatic_tax` object - `enabled` boolean, required - `collection_method` 'charge_automatically' | 'send_invoice' - `created` union - object - `gt` integer - `gte` integer - `lt` integer - `lte` integer - integer - `current_period_end` union - object - `gt` integer - `gte` integer - `lt` integer - `lte` integer - integer - `current_period_start` union - object - `gt` integer - `gte` integer - `lt` integer - `lte` integer - integer - `customer` string - `ending_before` string - `expand` string[] - `limit` integer - `price` string - `starting_after` string - `status` 'active' | 'all' | 'canceled' | 'ended' | 'incomplete' | 'incomplete_expired' | 'past_due' | 'paused' | 'trialing' | 'unpaid' - `test_clock` string ## Response `200` Successful response. - object - `data` Subscription[], required - `application` union — ID of the Connect Application that created the subscription. - string - Application - `id` string, required — Unique identifier for the object. - `name` string, nullable — The name of the application. - `object` 'application', required — String representing the object's type. Objects of the same type share the same value. - DeletedApplication - `deleted` true, required — Always true for a deleted object - `id` string, required — Unique identifier for the object. - `name` string, nullable — The name of the application. - `object` 'application', required — String representing the object's type. Objects of the same type share the same value. - `application_fee_percent` number, nullable — A non-negative decimal between 0 and 100, with at most two decimal places. This represents the percentage of the subscription invoice total that will be transferred to the application owner's Stripe account. - `automatic_tax` SubscriptionAutomaticTax, required - `disabled_reason` 'requires_location_inputs', nullable — If Stripe disabled automatic tax, this enum describes why. - `enabled` boolean, required — Whether Stripe automatically computes tax on this subscription. - `liability` ConnectAccountReference - `account` union — The connected account being referenced when `type` is `account`. - string - Account — This is an object representing a Stripe account. You can retrieve it to see properties on the account like its current requirements or if the account is enabled to make live charges or receive payouts. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts, the properties below are always returned. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, some properties are only returned until you create an [Account Link](/api/account_links) or [Account Session](/api/account_sessions) to start Connect Onboarding. Learn about the [differences between accounts](/connect/accounts). - `business_profile` AccountBusinessProfile - … - `business_type` 'company' | 'government_entity' | 'individual' | 'non_profit', nullable — The business type. After you create an [Account Link](/api/account_links) or [Account Session](/api/account_sessions), this property is only returned for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `capabilities` AccountCapabilities - … - `charges_enabled` boolean — Whether the account can process charges. - `company` LegalEntityCompany - … - `controller` AccountUnificationAccountController - … - `country` string — The account's country. - `created` integer — Time at which the account was connected. Measured in seconds since the Unix epoch. - `default_currency` string — Three-letter ISO currency code representing the default currency for the account. This must be a currency that [Stripe supports in the account's country](https://stripe.com/docs/payouts). - `details_submitted` boolean — Whether account details have been submitted. Accounts with Stripe Dashboard access, which includes Standard accounts, cannot receive payouts before this is true. Accounts where this is false should be directed to [an onboarding flow](/connect/onboarding) to finish submitting account details. - `email` string, nullable — An email address associated with the account. It's not used for authentication and Stripe doesn't market to this field without explicit approval from the platform. - `external_accounts` object — External accounts (bank accounts and debit cards) currently attached to this account. External accounts are only returned for requests where `controller[is_controller]` is true. - … - `future_requirements` AccountFutureRequirements - … - `groups` AccountGroupMembership - … - `id` string, required — Unique identifier for the object. - `individual` Person — This is an object representing a person associated with a Stripe account. A platform cannot access a person for an account where [account.controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, after creating an Account Link or Account Session to start Connect onboarding. See the [Standard onboarding](/connect/standard-accounts) or [Express onboarding](/connect/express-accounts) documentation for information about prefilling information and account onboarding steps. Learn more about [handling identity verification with the API](/connect/handling-api-verification#person-information). - … - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'account', required — String representing the object's type. Objects of the same type share the same value. - `payouts_enabled` boolean — Whether the funds in this account can be paid out. - `requirements` AccountRequirements - … - `settings` AccountSettings - … - `tos_acceptance` AccountTosAcceptance - … - `type` 'custom' | 'express' | 'none' | 'standard' — The Stripe account type. Can be `standard`, `express`, `custom`, or `none`. - `type` 'account' | 'self', required — Type of the account referenced. - `billing_cycle_anchor` integer, required — The reference point that aligns future [billing cycle](https://stripe.com/docs/subscriptions/billing-cycle) dates. It sets the day of week for `week` intervals, the day of month for `month` and `year` intervals, and the month of year for `year` intervals. The timestamp is in UTC format. - `billing_cycle_anchor_config` SubscriptionsResourceBillingCycleAnchorConfig - `day_of_month` integer, required — The day of the month of the billing_cycle_anchor. - `hour` integer, nullable — The hour of the day of the billing_cycle_anchor. - `minute` integer, nullable — The minute of the hour of the billing_cycle_anchor. - `month` integer, nullable — The month to start full cycle billing periods. - `second` integer, nullable — The second of the minute of the billing_cycle_anchor. - `billing_thresholds` SubscriptionBillingThresholds - `amount_gte` integer, nullable — Monetary threshold that triggers the subscription to create an invoice - `reset_billing_cycle_anchor` boolean, nullable — Indicates if the `billing_cycle_anchor` should be reset when a threshold is reached. If true, `billing_cycle_anchor` will be updated to the date/time the threshold was last reached; otherwise, the value will remain unchanged. This value may not be `true` if the subscription contains items with plans that have `aggregate_usage=last_ever`. - `cancel_at` integer, nullable — A date in the future at which the subscription will automatically get canceled - `cancel_at_period_end` boolean, required — Whether this subscription will (if `status=active`) or did (if `status=canceled`) cancel at the end of the current billing period. - `canceled_at` integer, nullable — If the subscription has been canceled, the date of that cancellation. If the subscription was canceled with `cancel_at_period_end`, `canceled_at` will reflect the time of the most recent update request, not the end of the subscription period when the subscription is automatically moved to a canceled state. - `cancellation_details` CancellationDetails - `comment` string, nullable — Additional comments about why the user canceled the subscription, if the subscription was canceled explicitly by the user. - `feedback` 'customer_service' | 'low_quality' | 'missing_features' | 'other' | 'switched_service' | 'too_complex' | 'too_expensive' | 'unused', nullable — The customer submitted reason for why they canceled, if the subscription was canceled explicitly by the user. - `reason` 'cancellation_requested' | 'payment_disputed' | 'payment_failed', nullable — Why this subscription was canceled. - `collection_method` 'charge_automatically' | 'send_invoice', required — Either `charge_automatically`, or `send_invoice`. When charging automatically, Stripe will attempt to pay this subscription at the end of the cycle using the default source attached to the customer. When sending an invoice, Stripe will email your customer an invoice with payment instructions and mark the subscription as `active`. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `current_period_end` integer, required — End of the current period that the subscription has been invoiced for. At the end of this period, a new invoice will be created. - `current_period_start` integer, required — Start of the current period that the subscription has been invoiced for. - `customer` union, required — ID of the customer who owns the subscription. - string - Customer — This object represents a customer of your business. Use it to [create recurring charges](https://stripe.com/docs/invoicing/customer), [save payment](https://stripe.com/docs/payments/save-during-payment) and contact information, and track payments that belong to the same customer. - `address` Address - `city` string, nullable — City, district, suburb, town, or village. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `line1` string, nullable — Address line 1 (e.g., street, PO Box, or company name). - `line2` string, nullable — Address line 2 (e.g., apartment, suite, unit, or building). - `postal_code` string, nullable — ZIP or postal code. - `state` string, nullable — State, county, province, or region. - `balance` integer — The current balance, if any, that's stored on the customer. If negative, the customer has credit to apply to their next invoice. If positive, the customer has an amount owed that's added to their next invoice. The balance only considers amounts that Stripe hasn't successfully applied to any invoice. It doesn't reflect unpaid invoices. This balance is only taken into account after invoices finalize. - `cash_balance` CashBalance — A customer's `Cash balance` represents real funds. Customers can add funds to their cash balance by sending a bank transfer. These funds can be used for payment and can eventually be paid out to your bank account. - `available` object, nullable — A hash of all cash balances available to this customer. You cannot delete a customer with any cash balances, even if the balance is 0. Amounts are represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). - `customer` string, required — The ID of the customer whose cash balance this object represents. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `object` 'cash_balance', required — String representing the object's type. Objects of the same type share the same value. - `settings` CustomerBalanceCustomerBalanceSettings, required - `reconciliation_mode` 'automatic' | 'manual', required — The configuration for how funds that land in the customer cash balance are reconciled. - `using_merchant_default` boolean, required — A flag to indicate if reconciliation mode returned is the user's default or is specific to this customer cash balance - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, nullable — Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) the customer can be charged in for recurring billing purposes. - `default_source` union — ID of the default payment source for the customer. If you use payment methods created through the PaymentMethods API, see the [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) field instead. - string - BankAccount — These bank accounts are payment methods on `Customer` objects. On the other hand [External Accounts](/api#external_accounts) are transfer destinations on `Account` objects for connected accounts. They can be bank accounts or debit cards as well, and are documented in the links above. Related guide: [Bank debits and transfers](/payments/bank-debits-transfers) - `account` union — The ID of the account that the bank account is associated with. - … - `account_holder_name` string, nullable — The name of the person or business that owns the bank account. - `account_holder_type` string, nullable — The type of entity that holds the account. This can be either `individual` or `company`. - `account_type` string, nullable — The bank account type. This can only be `checking` or `savings` in most countries. In Japan, this can only be `futsu` or `toza`. - `available_payout_methods` string[], nullable — A set of available payout methods for this bank account. Only values from this set should be passed as the `method` when creating a payout. - `bank_name` string, nullable — Name of the bank associated with the routing number (e.g., `WELLS FARGO`). - `country` string, required — Two-letter ISO code representing the country the bank account is located in. - `currency` string, currency, required — Three-letter [ISO code for the currency](https://stripe.com/docs/payouts) paid out to the bank account. - `customer` union — The ID of the customer that the bank account is associated with. - … - `default_for_currency` boolean, nullable — Whether this bank account is the default external account for its currency. - `fingerprint` string, nullable — Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same. - `future_requirements` ExternalAccountRequirements - … - `id` string, required — Unique identifier for the object. - `last4` string, required — The last four digits of the bank account number. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'bank_account', required — String representing the object's type. Objects of the same type share the same value. - `requirements` ExternalAccountRequirements - … - `routing_number` string, nullable — The routing transit number for the bank account. - `status` string, required — For bank accounts, possible values are `new`, `validated`, `verified`, `verification_failed`, or `errored`. A bank account that hasn't had any activity or validation performed is `new`. If Stripe can determine that the bank account exists, its status will be `validated`. Note that there often isn’t enough information to know (e.g., for smaller credit unions), and the validation is not always run. If customer bank account verification has succeeded, the bank account status will be `verified`. If the verification failed for any reason, such as microdeposit failure, the status will be `verification_failed`. If a payout sent to this bank account fails, we'll set the status to `errored` and will not continue to send [scheduled payouts](https://stripe.com/docs/payouts#payout-schedule) until the bank details are updated. For external accounts, possible values are `new`, `errored` and `verification_failed`. If a payout fails, the status is set to `errored` and scheduled payouts are stopped until account details are updated. In the US and India, if we can't [verify the owner of the bank account](https://support.stripe.com/questions/bank-account-ownership-verification), we'll set the status to `verification_failed`. Other validations aren't run against external accounts because they're only used for payouts. This means the other statuses don't apply. - Card — You can store multiple cards on a customer in order to charge the customer later. You can also store multiple debit cards on a recipient in order to transfer to those cards later. Related guide: [Card payments with Sources](https://stripe.com/docs/sources/cards) - `account` union — The account this card belongs to. This attribute will not be in the card object if the card belongs to a customer or recipient instead. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - … - `address_city` string, nullable — City/District/Suburb/Town/Village. - `address_country` string, nullable — Billing address country, if provided when creating card. - `address_line1` string, nullable — Address line 1 (Street address/PO Box/Company name). - `address_line1_check` string, nullable — If `address_line1` was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. - `address_line2` string, nullable — Address line 2 (Apartment/Suite/Unit/Building). - `address_state` string, nullable — State/County/Province/Region. - `address_zip` string, nullable — ZIP or postal code. - `address_zip_check` string, nullable — If `address_zip` was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. - `allow_redisplay` 'always' | 'limited' | 'unspecified', nullable — This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”. - `available_payout_methods` string[], nullable — A set of available payout methods for this card. Only values from this set should be passed as the `method` when creating a payout. - `brand` string, required — Card brand. Can be `American Express`, `Diners Club`, `Discover`, `Eftpos Australia`, `Girocard`, `JCB`, `MasterCard`, `UnionPay`, `Visa`, or `Unknown`. - `country` string, nullable — Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected. - `currency` string, currency, nullable — Three-letter [ISO code for currency](https://www.iso.org/iso-4217-currency-codes.html) in lowercase. Must be a [supported currency](https://docs.stripe.com/currencies). Only applicable on accounts (not customers or recipients). The card can be used as a transfer destination for funds in this currency. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `customer` union — The customer that this card belongs to. This attribute will not be in the card object if the card belongs to an account or recipient instead. - … - `cvc_check` string, nullable — If a CVC was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. A result of unchecked indicates that CVC was provided but hasn't been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see [Check if a card is valid without a charge](https://support.stripe.com/questions/check-if-a-card-is-valid-without-a-charge). - `default_for_currency` boolean, nullable — Whether this card is the default external account for its currency. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `dynamic_last4` string, nullable — (For tokenized numbers only.) The last four digits of the device account number. - `exp_month` integer, required — Two-digit number representing the card's expiration month. - `exp_year` integer, required — Four-digit number representing the card's expiration year. - `fingerprint` string, nullable — Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number. *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.* - `funding` string, required — Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`. - `id` string, required — Unique identifier for the object. - `iin` string — Issuer identification number of the card. - `last4` string, required — The last four digits of the card. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — Cardholder name. - `networks` TokenCardNetworks - … - `object` 'card', required — String representing the object's type. Objects of the same type share the same value. - `regulated_status` 'regulated' | 'unregulated', nullable — Status of a card based on the card issuer. - `status` string, nullable — For external accounts that are cards, possible values are `new` and `errored`. If a payout fails, the status is set to `errored` and [scheduled payouts](https://stripe.com/docs/payouts#payout-schedule) are stopped until account details are updated. - `tokenization_method` string, nullable — If the card number is tokenized, this is the method that was used. Can be `android_pay` (includes Google Pay), `apple_pay`, `masterpass`, `visa_checkout`, or null. - Source — `Source` objects allow you to accept a variety of payment methods. They represent a customer's payment instrument, and can be used with the Stripe API just like a `Card` object: once chargeable, they can be charged, or can be attached to customers. Stripe doesn't recommend using the deprecated [Sources API](https://stripe.com/docs/api/sources). We recommend that you adopt the [PaymentMethods API](https://stripe.com/docs/api/payment_methods). This newer API provides access to our latest features and payment method types. Related guides: [Sources API](https://stripe.com/docs/sources) and [Sources & Customers](https://stripe.com/docs/sources/customers). - `ach_credit_transfer` SourceTypeAchCreditTransfer - … - `ach_debit` SourceTypeAchDebit - … - `acss_debit` SourceTypeAcssDebit - … - `alipay` SourceTypeAlipay - … - `allow_redisplay` 'always' | 'limited' | 'unspecified', nullable — This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”. - `amount` integer, nullable — A positive integer in the smallest currency unit (that is, 100 cents for $1.00, or 1 for ¥1, Japanese Yen being a zero-decimal currency) representing the total amount associated with the source. This is the amount for which the source will be chargeable once ready. Required for `single_use` sources. - `au_becs_debit` SourceTypeAuBecsDebit - … - `bancontact` SourceTypeBancontact - … - `card` SourceTypeCard - … - `card_present` SourceTypeCardPresent - … - `client_secret` string, required — The client secret of the source. Used for client-side retrieval using a publishable key. - `code_verification` SourceCodeVerificationFlow - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, nullable — Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) associated with the source. This is the currency for which the source will be chargeable once ready. Required for `single_use` sources. - `customer` string — The ID of the customer to which this source is attached. This will not be present when the source has not been attached to a customer. - `eps` SourceTypeEps - … - `flow` string, required — The authentication `flow` of the source. `flow` is one of `redirect`, `receiver`, `code_verification`, `none`. - `giropay` SourceTypeGiropay - … - `id` string, required — Unique identifier for the object. - `ideal` SourceTypeIdeal - … - `klarna` SourceTypeKlarna - … - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `multibanco` SourceTypeMultibanco - … - `object` 'source', required — String representing the object's type. Objects of the same type share the same value. - `owner` SourceOwner - … - `p24` SourceTypeP24 - … - `receiver` SourceReceiverFlow - … - `redirect` SourceRedirectFlow - … - `sepa_debit` SourceTypeSepaDebit - … - `sofort` SourceTypeSofort - … - `source_order` SourceOrder - … - `statement_descriptor` string, nullable — Extra information about a source. This will appear on your customer's statement every time you charge the source. - `status` string, required — The status of the source, one of `canceled`, `chargeable`, `consumed`, `failed`, or `pending`. Only `chargeable` sources can be used to create a charge. - `three_d_secure` SourceTypeThreeDSecure - … - `type` 'ach_credit_transfer' | 'ach_debit' | 'acss_debit' | 'alipay' | 'au_becs_debit' | 'bancontact' | 'card' | 'card_present' | 'eps' | 'giropay' | 'ideal' | 'klarna' | 'multibanco' | 'p24' | 'sepa_debit' | 'sofort' | 'three_d_secure' | 'wechat', required — The `type` of the source. The `type` is a payment method, one of `ach_credit_transfer`, `ach_debit`, `alipay`, `bancontact`, `card`, `card_present`, `eps`, `giropay`, `ideal`, `multibanco`, `klarna`, `p24`, `sepa_debit`, `sofort`, `three_d_secure`, or `wechat`. An additional hash is included on the source with a name matching this value. It contains additional information specific to the [payment method](https://stripe.com/docs/sources) used. - `usage` string, nullable — Either `reusable` or `single_use`. Whether this source should be reusable or not. Some source types may or may not be reusable by construction, while others may leave the option at creation. If an incompatible value is passed, an error will be returned. - `wechat` SourceTypeWechat - … - `delinquent` boolean, nullable — Tracks the most recent state change on any invoice belonging to the customer. Paying an invoice or marking it uncollectible via the API will set this field to false. An automatic payment failure or passing the `invoice.due_date` will set this field to `true`. If an invoice becomes uncollectible by [dunning](https://stripe.com/docs/billing/automatic-collection), `delinquent` doesn't reset to `false`. If you care whether the customer has paid their most recent subscription invoice, use `subscription.status` instead. Paying or marking uncollectible any customer invoice regardless of whether it is the latest invoice for a subscription will always set this field to `false`. - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `discount` Discount — A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes). It contains information about when the discount began, when it will end, and what it is applied to. Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts) - `checkout_session` string, nullable — The Checkout session that this coupon is applied to, if it is applied to a particular session in payment mode. Will not be present for subscription mode. - `coupon` Coupon, required — A coupon contains information about a percent-off or amount-off discount you might want to apply to a customer. Coupons may be applied to [subscriptions](https://stripe.com/docs/api#subscriptions), [invoices](https://stripe.com/docs/api#invoices), [checkout sessions](https://stripe.com/docs/api/checkout/sessions), [quotes](https://stripe.com/docs/api#quotes), and more. Coupons do not work with conventional one-off [charges](https://stripe.com/docs/api#create_charge) or [payment intents](https://stripe.com/docs/api/payment_intents). - `amount_off` integer, nullable — Amount (in the `currency` specified) that will be taken off the subtotal of any invoices for this customer. - `applies_to` CouponAppliesTo - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, nullable — If `amount_off` has been set, the three-letter [ISO code for the currency](https://stripe.com/docs/currencies) of the amount to take off. - `currency_options` object — Coupons defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies). - `duration` 'forever' | 'once' | 'repeating', required — One of `forever`, `once`, and `repeating`. Describes how long a customer who applies this coupon will get the discount. - `duration_in_months` integer, nullable — If `duration` is `repeating`, the number of months the coupon applies. Null if coupon `duration` is `forever` or `once`. - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `max_redemptions` integer, nullable — Maximum number of times this coupon can be redeemed, in total, across all customers, before it is no longer valid. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — Name of the coupon displayed to customers on for instance invoices or receipts. - `object` 'coupon', required — String representing the object's type. Objects of the same type share the same value. - `percent_off` number, nullable — Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with percent_off of 50 will make a $ (or local equivalent)100 invoice $ (or local equivalent)50 instead. - `redeem_by` integer, nullable — Date after which the coupon can no longer be redeemed. - `times_redeemed` integer, required — Number of times this coupon has been applied to a customer. - `valid` boolean, required — Taking account of the above properties, whether this coupon can still be applied to a customer. - `customer` union — The ID of the customer associated with this discount. - string - Customer — recursive - DeletedCustomer - … - `end` integer, nullable — If the coupon has a duration of `repeating`, the date that this discount will end. If the coupon has a duration of `once` or `forever`, this attribute will be null. - `id` string, required — The ID of the discount object. Discounts cannot be fetched by ID. Use `expand[]=discounts` in API calls to expand discount IDs in an array. - `invoice` string, nullable — The invoice that the discount's coupon was applied to, if it was applied directly to a particular invoice. - `invoice_item` string, nullable — The invoice item `id` (or invoice line item `id` for invoice line items of type='subscription') that the discount's coupon was applied to, if it was applied directly to a particular invoice item or invoice line item. - `object` 'discount', required — String representing the object's type. Objects of the same type share the same value. - `promotion_code` union — The promotion code applied to create this discount. - string - PromotionCode — A Promotion Code represents a customer-redeemable code for a [coupon](https://stripe.com/docs/api#coupons). It can be used to create multiple codes for a single coupon. - … - `start` integer, required — Date that the coupon was applied. - `subscription` string, nullable — The subscription that this coupon is applied to, if it is applied to a particular subscription. - `subscription_item` string, nullable — The subscription item that this coupon is applied to, if it is applied to a particular subscription item. - `email` string, nullable — The customer's email address. - `id` string, required — Unique identifier for the object. - `invoice_credit_balance` object — The current multi-currency balances, if any, that's stored on the customer. If positive in a currency, the customer has a credit to apply to their next invoice denominated in that currency. If negative, the customer has an amount owed that's added to their next invoice denominated in that currency. These balances don't apply to unpaid invoices. They solely track amounts that Stripe hasn't successfully applied to any invoice. Stripe only applies a balance in a specific currency to an invoice after that invoice (which is in the same currency) finalizes. - `invoice_prefix` string, nullable — The prefix for the customer used to generate unique invoice numbers. - `invoice_settings` InvoiceSettingCustomerSetting - `custom_fields` InvoiceSettingCustomField[], nullable — Default custom fields to be displayed on invoices for this customer. - `name` string, required — The name of the custom field. - `value` string, required — The value of the custom field. - `default_payment_method` union — ID of a payment method that's attached to the customer, to be used as the customer's default payment method for subscriptions and invoices. - string - PaymentMethod — PaymentMethod objects represent your customer's payment instruments. You can use them with [PaymentIntents](https://stripe.com/docs/payments/payment-intents) to collect payments or save them to Customer objects to store instrument details for future payments. Related guides: [Payment Methods](https://stripe.com/docs/payments/payment-methods) and [More Payment Scenarios](https://stripe.com/docs/payments/more-payment-scenarios). - … - `footer` string, nullable — Default footer to be displayed on invoices for this customer. - `rendering_options` InvoiceSettingCustomerRenderingOptions - `amount_tax_display` string, nullable — How line-item prices and amounts will be displayed with respect to tax on invoice PDFs. - `template` string, nullable — ID of the invoice rendering template to be used for this customer's invoices. If set, the template will be used on all invoices for this customer unless a template is set directly on the invoice. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — The customer's full name or business name. - `next_invoice_sequence` integer — The suffix of the customer's next invoice number (for example, 0001). When the account uses account level sequencing, this parameter is ignored in API requests and the field omitted in API responses. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `phone` string, nullable — The customer's phone number. - `preferred_locales` string[], nullable — The customer's preferred locales (languages), ordered by preference. - `shipping` Shipping - `address` Address - `city` string, nullable — City, district, suburb, town, or village. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `line1` string, nullable — Address line 1 (e.g., street, PO Box, or company name). - `line2` string, nullable — Address line 2 (e.g., apartment, suite, unit, or building). - `postal_code` string, nullable — ZIP or postal code. - `state` string, nullable — State, county, province, or region. - `carrier` string, nullable — The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc. - `name` string — Recipient name. - `phone` string, nullable — Recipient phone (including extension). - `tracking_number` string, nullable — The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas. - `sources` object — The customer's payment sources, if any. - `data` union[], required — Details about each object. - union - … - `has_more` boolean, required — True if this list has another page of items after this one that can be fetched. - `object` 'list', required — String representing the object's type. Objects of the same type share the same value. Always has the value `list`. - `url` string, required — The URL where this list can be accessed. - `subscriptions` object — The customer's current subscriptions, if any. - `data` Subscription[], required — Details about each object. - `has_more` boolean, required — True if this list has another page of items after this one that can be fetched. - `object` 'list', required — String representing the object's type. Objects of the same type share the same value. Always has the value `list`. - `url` string, required — The URL where this list can be accessed. - `tax` CustomerTax - `automatic_tax` 'failed' | 'not_collecting' | 'supported' | 'unrecognized_location', required — Surfaces if automatic tax computation is possible given the current customer location information. - `ip_address` string, nullable — A recent IP address of the customer used for tax reporting and tax location inference. - `location` CustomerTaxLocation - `country` string, required — The customer's country as identified by Stripe Tax. - `source` 'billing_address' | 'ip_address' | 'payment_method' | 'shipping_destination', required — The data source used to infer the customer's location. - `state` string, nullable — The customer's state, county, province, or region as identified by Stripe Tax. - `tax_exempt` 'exempt' | 'none' | 'reverse', nullable — Describes the customer's tax exemption status, which is `none`, `exempt`, or `reverse`. When set to `reverse`, invoice and receipt PDFs include the following text: **"Reverse charge"**. - `tax_ids` object — The customer's tax IDs. - `data` TaxId[], required — Details about each object. - `country` string, nullable — Two-letter ISO code representing the country of the tax ID. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `customer` union — ID of the customer. - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `object` 'tax_id', required — String representing the object's type. Objects of the same type share the same value. - `owner` TaxIDsOwner - … - `type` 'ad_nrt' | 'ae_trn' | 'al_tin' | 'am_tin' | 'ao_tin' | 'ar_cuit' | 'au_abn' | 'au_arn' | 'ba_tin' | 'bb_tin' | 'bg_uic' | 'bh_vat' | 'bo_tin' | 'br_cnpj' | 'br_cpf' | 'bs_tin' | 'by_tin' | 'ca_bn' | 'ca_gst_hst' | 'ca_pst_bc' | 'ca_pst_mb' | 'ca_pst_sk' | 'ca_qst' | 'cd_nif' | 'ch_uid' | 'ch_vat' | 'cl_tin' | 'cn_tin' | 'co_nit' | 'cr_tin' | 'de_stn' | 'do_rcn' | 'ec_ruc' | 'eg_tin' | 'es_cif' | 'eu_oss_vat' | 'eu_vat' | 'gb_vat' | 'ge_vat' | 'gn_nif' | 'hk_br' | 'hr_oib' | 'hu_tin' | 'id_npwp' | 'il_vat' | 'in_gst' | 'is_vat' | 'jp_cn' | 'jp_rn' | 'jp_trn' | 'ke_pin' | 'kh_tin' | 'kr_brn' | 'kz_bin' | 'li_uid' | 'li_vat' | 'ma_vat' | 'md_vat' | 'me_pib' | 'mk_vat' | 'mr_nif' | 'mx_rfc' | 'my_frp' | 'my_itn' | 'my_sst' | 'ng_tin' | 'no_vat' | 'no_voec' | 'np_pan' | 'nz_gst' | 'om_vat' | 'pe_ruc' | 'ph_tin' | 'ro_tin' | 'rs_pib' | 'ru_inn' | 'ru_kpp' | 'sa_vat' | 'sg_gst' | 'sg_uen' | 'si_tin' | 'sn_ninea' | 'sr_fin' | 'sv_nit' | 'th_vat' | 'tj_tin' | 'tr_tin' | 'tw_vat' | 'tz_vat' | 'ua_vat' | 'ug_tin' | 'unknown' | 'us_ein' | 'uy_ruc' | 'uz_tin' | 'uz_vat' | 've_rif' | 'vn_tin' | 'za_vat' | 'zm_tin' | 'zw_tin', required — Type of the tax ID, one of `ad_nrt`, `ae_trn`, `al_tin`, `am_tin`, `ao_tin`, `ar_cuit`, `au_abn`, `au_arn`, `ba_tin`, `bb_tin`, `bg_uic`, `bh_vat`, `bo_tin`, `br_cnpj`, `br_cpf`, `bs_tin`, `by_tin`, `ca_bn`, `ca_gst_hst`, `ca_pst_bc`, `ca_pst_mb`, `ca_pst_sk`, `ca_qst`, `cd_nif`, `ch_uid`, `ch_vat`, `cl_tin`, `cn_tin`, `co_nit`, `cr_tin`, `de_stn`, `do_rcn`, `ec_ruc`, `eg_tin`, `es_cif`, `eu_oss_vat`, `eu_vat`, `gb_vat`, `ge_vat`, `gn_nif`, `hk_br`, `hr_oib`, `hu_tin`, `id_npwp`, `il_vat`, `in_gst`, `is_vat`, `jp_cn`, `jp_rn`, `jp_trn`, `ke_pin`, `kh_tin`, `kr_brn`, `kz_bin`, `li_uid`, `li_vat`, `ma_vat`, `md_vat`, `me_pib`, `mk_vat`, `mr_nif`, `mx_rfc`, `my_frp`, `my_itn`, `my_sst`, `ng_tin`, `no_vat`, `no_voec`, `np_pan`, `nz_gst`, `om_vat`, `pe_ruc`, `ph_tin`, `ro_tin`, `rs_pib`, `ru_inn`, `ru_kpp`, `sa_vat`, `sg_gst`, `sg_uen`, `si_tin`, `sn_ninea`, `sr_fin`, `sv_nit`, `th_vat`, `tj_tin`, `tr_tin`, `tw_vat`, `tz_vat`, `ua_vat`, `ug_tin`, `us_ein`, `uy_ruc`, `uz_tin`, `uz_vat`, `ve_rif`, `vn_tin`, `za_vat`, `zm_tin`, or `zw_tin`. Note that some legacy tax IDs have type `unknown` - `value` string, required — Value of the tax ID. - `verification` TaxIdVerification - … - `has_more` boolean, required — True if this list has another page of items after this one that can be fetched. - `object` 'list', required — String representing the object's type. Objects of the same type share the same value. Always has the value `list`. - `url` string, required — The URL where this list can be accessed. - `test_clock` union — ID of the test clock that this customer belongs to. - string - TestHelpersTestClock — A test clock enables deterministic control over objects in testmode. With a test clock, you can create objects at a frozen time in the past or future, and advance to a specific future time to observe webhooks and state changes. After the clock advances, you can either validate the current state of your scenario (and test your assumptions), change the current state of your scenario (and test more complex scenarios), or keep advancing forward in time. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `deletes_after` integer, required — Time at which this clock is scheduled to auto delete. - `frozen_time` integer, required — Time at which all objects belonging to this clock are frozen. - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `name` string, nullable — The custom name supplied at creation. - `object` 'test_helpers.test_clock', required — String representing the object's type. Objects of the same type share the same value. - `status` 'advancing' | 'internal_failure' | 'ready', required — The status of the Test Clock. - `status_details` BillingClocksResourceStatusDetailsStatusDetails, required - … - DeletedCustomer - `deleted` true, required — Always true for a deleted object - `id` string, required — Unique identifier for the object. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `days_until_due` integer, nullable — Number of days a customer has to pay invoices generated by this subscription. This value will be `null` for subscriptions where `collection_method=charge_automatically`. - `default_payment_method` union — ID of the default payment method for the subscription. It must belong to the customer associated with the subscription. This takes precedence over `default_source`. If neither are set, invoices will use the customer's [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) or [default_source](https://stripe.com/docs/api/customers/object#customer_object-default_source). - string - PaymentMethod — PaymentMethod objects represent your customer's payment instruments. You can use them with [PaymentIntents](https://stripe.com/docs/payments/payment-intents) to collect payments or save them to Customer objects to store instrument details for future payments. Related guides: [Payment Methods](https://stripe.com/docs/payments/payment-methods) and [More Payment Scenarios](https://stripe.com/docs/payments/more-payment-scenarios). - `acss_debit` PaymentMethodAcssDebit - `bank_name` string, nullable — Name of the bank associated with the bank account. - `fingerprint` string, nullable — Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same. - `institution_number` string, nullable — Institution number of the bank account. - `last4` string, nullable — Last four digits of the bank account number. - `transit_number` string, nullable — Transit number of the bank account. - `affirm` PaymentMethodAffirm - `afterpay_clearpay` PaymentMethodAfterpayClearpay - `alipay` PaymentFlowsPrivatePaymentMethodsAlipay - `allow_redisplay` 'always' | 'limited' | 'unspecified' — This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”. - `alma` PaymentMethodAlma - `amazon_pay` PaymentMethodAmazonPay - `au_becs_debit` PaymentMethodAuBecsDebit - `bsb_number` string, nullable — Six-digit number identifying bank and branch associated with this bank account. - `fingerprint` string, nullable — Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same. - `last4` string, nullable — Last four digits of the bank account number. - `bacs_debit` PaymentMethodBacsDebit - `fingerprint` string, nullable — Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same. - `last4` string, nullable — Last four digits of the bank account number. - `sort_code` string, nullable — Sort code of the bank account. (e.g., `10-20-30`) - `bancontact` PaymentMethodBancontact - `billing_details` BillingDetails, required - `address` Address - `city` string, nullable — City, district, suburb, town, or village. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `line1` string, nullable — Address line 1 (e.g., street, PO Box, or company name). - `line2` string, nullable — Address line 2 (e.g., apartment, suite, unit, or building). - `postal_code` string, nullable — ZIP or postal code. - `state` string, nullable — State, county, province, or region. - `email` string, nullable — Email address. - `name` string, nullable — Full name. - `phone` string, nullable — Billing phone number (including extension). - `blik` PaymentMethodBlik - `boleto` PaymentMethodBoleto - `tax_id` string, required — Uniquely identifies the customer tax id (CNPJ or CPF) - `card` PaymentMethodCard - `brand` string, required — Card brand. Can be `amex`, `diners`, `discover`, `eftpos_au`, `jcb`, `link`, `mastercard`, `unionpay`, `visa`, or `unknown`. - `checks` PaymentMethodCardChecks - `address_line1_check` string, nullable — If a address line1 was provided, results of the check, one of `pass`, `fail`, `unavailable`, or `unchecked`. - `address_postal_code_check` string, nullable — If a address postal code was provided, results of the check, one of `pass`, `fail`, `unavailable`, or `unchecked`. - `cvc_check` string, nullable — If a CVC was provided, results of the check, one of `pass`, `fail`, `unavailable`, or `unchecked`. - `country` string, nullable — Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected. - `display_brand` string, nullable — The brand to use when displaying the card, this accounts for customer's brand choice on dual-branded cards. Can be `american_express`, `cartes_bancaires`, `diners_club`, `discover`, `eftpos_australia`, `interac`, `jcb`, `mastercard`, `union_pay`, `visa`, or `other` and may contain more values in the future. - `exp_month` integer, required — Two-digit number representing the card's expiration month. - `exp_year` integer, required — Four-digit number representing the card's expiration year. - `fingerprint` string, nullable — Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number. *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.* - `funding` string, required — Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`. - `generated_from` PaymentMethodCardGeneratedCard - `charge` string, nullable — The charge that created this object. - `payment_method_details` CardGeneratedFromPaymentMethodDetails - … - `setup_attempt` union — The ID of the SetupAttempt that generated this PaymentMethod, if any. - … - `last4` string, required — The last four digits of the card. - `networks` Networks - `available` string[], required — All available networks for the card. - `preferred` string, nullable — The preferred network for co-branded cards. Can be `cartes_bancaires`, `mastercard`, `visa` or `invalid_preference` if requested network is not valid for the card. - `regulated_status` 'regulated' | 'unregulated', nullable — Status of a card based on the card issuer. - `three_d_secure_usage` ThreeDSecureUsage - `supported` boolean, required — Whether 3D Secure is supported on this card. - `wallet` PaymentMethodCardWallet - `amex_express_checkout` PaymentMethodCardWalletAmexExpressCheckout - `apple_pay` PaymentMethodCardWalletApplePay - `dynamic_last4` string, nullable — (For tokenized numbers only.) The last four digits of the device account number. - `google_pay` PaymentMethodCardWalletGooglePay - `link` PaymentMethodCardWalletLink - `masterpass` PaymentMethodCardWalletMasterpass - … - `samsung_pay` PaymentMethodCardWalletSamsungPay - `type` 'amex_express_checkout' | 'apple_pay' | 'google_pay' | 'link' | 'masterpass' | 'samsung_pay' | 'visa_checkout', required — The type of the card wallet, one of `amex_express_checkout`, `apple_pay`, `google_pay`, `masterpass`, `samsung_pay`, `visa_checkout`, or `link`. An additional hash is included on the Wallet subhash with a name matching this value. It contains additional information specific to the card wallet type. - `visa_checkout` PaymentMethodCardWalletVisaCheckout - … - `card_present` PaymentMethodCardPresent - `brand` string, nullable — Card brand. Can be `amex`, `diners`, `discover`, `eftpos_au`, `jcb`, `link`, `mastercard`, `unionpay`, `visa`, or `unknown`. - `brand_product` string, nullable — The [product code](https://stripe.com/docs/card-product-codes) that identifies the specific program or product associated with a card. - `cardholder_name` string, nullable — The cardholder name as read from the card, in [ISO 7813](https://en.wikipedia.org/wiki/ISO/IEC_7813) format. May include alphanumeric characters, special characters and first/last name separator (`/`). In some cases, the cardholder name may not be available depending on how the issuer has configured the card. Cardholder name is typically not available on swipe or contactless payments, such as those made with Apple Pay and Google Pay. - `country` string, nullable — Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected. - `description` string, nullable — A high-level description of the type of cards issued in this range. - `exp_month` integer, required — Two-digit number representing the card's expiration month. - `exp_year` integer, required — Four-digit number representing the card's expiration year. - `fingerprint` string, nullable — Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number. *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.* - `funding` string, nullable — Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`. - `issuer` string, nullable — The name of the card's issuing bank. - `last4` string, nullable — The last four digits of the card. - `networks` PaymentMethodCardPresentNetworks - `available` string[], required — All available networks for the card. - `preferred` string, nullable — The preferred network for the card. - `offline` PaymentMethodDetailsCardPresentOffline - `stored_at` integer, nullable — Time at which the payment was collected while offline - `type` 'deferred', nullable — The method used to process this payment method offline. Only deferred is allowed. - `preferred_locales` string[], nullable — EMV tag 5F2D. Preferred languages specified by the integrated circuit chip. - `read_method` 'contact_emv' | 'contactless_emv' | 'contactless_magstripe_mode' | 'magnetic_stripe_fallback' | 'magnetic_stripe_track2', nullable — How card details were read in this transaction. - `wallet` PaymentFlowsPrivatePaymentMethodsCardPresentCommonWallet - `type` 'apple_pay' | 'google_pay' | 'samsung_pay' | 'unknown', required — The type of mobile wallet, one of `apple_pay`, `google_pay`, `samsung_pay`, or `unknown`. - `cashapp` PaymentMethodCashapp - `buyer_id` string, nullable — A unique and immutable identifier assigned by Cash App to every buyer. - `cashtag` string, nullable — A public identifier for buyers using Cash App. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `customer` union — The ID of the Customer to which this PaymentMethod is saved. This will not be set when the PaymentMethod has not been saved to a Customer. - string - Customer — This object represents a customer of your business. Use it to [create recurring charges](https://stripe.com/docs/invoicing/customer), [save payment](https://stripe.com/docs/payments/save-during-payment) and contact information, and track payments that belong to the same customer. - `address` Address - … - `balance` integer — The current balance, if any, that's stored on the customer. If negative, the customer has credit to apply to their next invoice. If positive, the customer has an amount owed that's added to their next invoice. The balance only considers amounts that Stripe hasn't successfully applied to any invoice. It doesn't reflect unpaid invoices. This balance is only taken into account after invoices finalize. - `cash_balance` CashBalance — A customer's `Cash balance` represents real funds. Customers can add funds to their cash balance by sending a bank transfer. These funds can be used for payment and can eventually be paid out to your bank account. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, nullable — Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) the customer can be charged in for recurring billing purposes. - `default_source` union — ID of the default payment source for the customer. If you use payment methods created through the PaymentMethods API, see the [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) field instead. - … - `delinquent` boolean, nullable — Tracks the most recent state change on any invoice belonging to the customer. Paying an invoice or marking it uncollectible via the API will set this field to false. An automatic payment failure or passing the `invoice.due_date` will set this field to `true`. If an invoice becomes uncollectible by [dunning](https://stripe.com/docs/billing/automatic-collection), `delinquent` doesn't reset to `false`. If you care whether the customer has paid their most recent subscription invoice, use `subscription.status` instead. Paying or marking uncollectible any customer invoice regardless of whether it is the latest invoice for a subscription will always set this field to `false`. - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `discount` Discount — A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes). It contains information about when the discount began, when it will end, and what it is applied to. Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts) - … - `email` string, nullable — The customer's email address. - `id` string, required — Unique identifier for the object. - `invoice_credit_balance` object — The current multi-currency balances, if any, that's stored on the customer. If positive in a currency, the customer has a credit to apply to their next invoice denominated in that currency. If negative, the customer has an amount owed that's added to their next invoice denominated in that currency. These balances don't apply to unpaid invoices. They solely track amounts that Stripe hasn't successfully applied to any invoice. Stripe only applies a balance in a specific currency to an invoice after that invoice (which is in the same currency) finalizes. - `invoice_prefix` string, nullable — The prefix for the customer used to generate unique invoice numbers. - `invoice_settings` InvoiceSettingCustomerSetting - … - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — The customer's full name or business name. - `next_invoice_sequence` integer — The suffix of the customer's next invoice number (for example, 0001). When the account uses account level sequencing, this parameter is ignored in API requests and the field omitted in API responses. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `phone` string, nullable — The customer's phone number. - `preferred_locales` string[], nullable — The customer's preferred locales (languages), ordered by preference. - `shipping` Shipping - … - `sources` object — The customer's payment sources, if any. - … - `subscriptions` object — The customer's current subscriptions, if any. - … - `tax` CustomerTax - … - `tax_exempt` 'exempt' | 'none' | 'reverse', nullable — Describes the customer's tax exemption status, which is `none`, `exempt`, or `reverse`. When set to `reverse`, invoice and receipt PDFs include the following text: **"Reverse charge"**. - `tax_ids` object — The customer's tax IDs. - … - `test_clock` union — ID of the test clock that this customer belongs to. - … - `customer_balance` PaymentMethodCustomerBalance - `eps` PaymentMethodEps - `bank` 'arzte_und_apotheker_bank' | 'austrian_anadi_bank_ag' | 'bank_austria' | 'bankhaus_carl_spangler' | 'bankhaus_schelhammer_und_schattera_ag' | 'bawag_psk_ag' | 'bks_bank_ag' | 'brull_kallmus_bank_ag' | 'btv_vier_lander_bank' | 'capital_bank_grawe_gruppe_ag' | 'deutsche_bank_ag' | 'dolomitenbank' | 'easybank_ag' | 'erste_bank_und_sparkassen' | 'hypo_alpeadriabank_international_ag' | 'hypo_bank_burgenland_aktiengesellschaft' | 'hypo_noe_lb_fur_niederosterreich_u_wien' | 'hypo_oberosterreich_salzburg_steiermark' | 'hypo_tirol_bank_ag' | 'hypo_vorarlberg_bank_ag' | 'marchfelder_bank' | 'oberbank_ag' | 'raiffeisen_bankengruppe_osterreich' | 'schoellerbank_ag' | 'sparda_bank_wien' | 'volksbank_gruppe' | 'volkskreditbank_ag' | 'vr_bank_braunau', nullable — The customer's bank. Should be one of `arzte_und_apotheker_bank`, `austrian_anadi_bank_ag`, `bank_austria`, `bankhaus_carl_spangler`, `bankhaus_schelhammer_und_schattera_ag`, `bawag_psk_ag`, `bks_bank_ag`, `brull_kallmus_bank_ag`, `btv_vier_lander_bank`, `capital_bank_grawe_gruppe_ag`, `deutsche_bank_ag`, `dolomitenbank`, `easybank_ag`, `erste_bank_und_sparkassen`, `hypo_alpeadriabank_international_ag`, `hypo_noe_lb_fur_niederosterreich_u_wien`, `hypo_oberosterreich_salzburg_steiermark`, `hypo_tirol_bank_ag`, `hypo_vorarlberg_bank_ag`, `hypo_bank_burgenland_aktiengesellschaft`, `marchfelder_bank`, `oberbank_ag`, `raiffeisen_bankengruppe_osterreich`, `schoellerbank_ag`, `sparda_bank_wien`, `volksbank_gruppe`, `volkskreditbank_ag`, or `vr_bank_braunau`. - `fpx` PaymentMethodFpx - `bank` 'affin_bank' | 'agrobank' | 'alliance_bank' | 'ambank' | 'bank_islam' | 'bank_muamalat' | 'bank_of_china' | 'bank_rakyat' | 'bsn' | 'cimb' | 'deutsche_bank' | 'hong_leong_bank' | 'hsbc' | 'kfh' | 'maybank2e' | 'maybank2u' | 'ocbc' | 'pb_enterprise' | 'public_bank' | 'rhb' | 'standard_chartered' | 'uob', required — The customer's bank, if provided. Can be one of `affin_bank`, `agrobank`, `alliance_bank`, `ambank`, `bank_islam`, `bank_muamalat`, `bank_rakyat`, `bsn`, `cimb`, `hong_leong_bank`, `hsbc`, `kfh`, `maybank2u`, `ocbc`, `public_bank`, `rhb`, `standard_chartered`, `uob`, `deutsche_bank`, `maybank2e`, `pb_enterprise`, or `bank_of_china`. - `giropay` PaymentMethodGiropay - `grabpay` PaymentMethodGrabpay - `id` string, required — Unique identifier for the object. - `ideal` PaymentMethodIdeal - `bank` 'abn_amro' | 'asn_bank' | 'bunq' | 'handelsbanken' | 'ing' | 'knab' | 'moneyou' | 'n26' | 'nn' | 'rabobank' | 'regiobank' | 'revolut' | 'sns_bank' | 'triodos_bank' | 'van_lanschot' | 'yoursafe', nullable — The customer's bank, if provided. Can be one of `abn_amro`, `asn_bank`, `bunq`, `handelsbanken`, `ing`, `knab`, `moneyou`, `n26`, `nn`, `rabobank`, `regiobank`, `revolut`, `sns_bank`, `triodos_bank`, `van_lanschot`, or `yoursafe`. - `bic` 'ABNANL2A' | 'ASNBNL21' | 'BITSNL2A' | 'BUNQNL2A' | 'FVLBNL22' | 'HANDNL2A' | 'INGBNL2A' | 'KNABNL2H' | 'MOYONL21' | 'NNBANL2G' | 'NTSBDEB1' | 'RABONL2U' | 'RBRBNL21' | 'REVOIE23' | 'REVOLT21' | 'SNSBNL2A' | 'TRIONL2U', nullable — The Bank Identifier Code of the customer's bank, if the bank was provided. - `interac_present` PaymentMethodInteracPresent - `brand` string, nullable — Card brand. Can be `interac`, `mastercard` or `visa`. - `cardholder_name` string, nullable — The cardholder name as read from the card, in [ISO 7813](https://en.wikipedia.org/wiki/ISO/IEC_7813) format. May include alphanumeric characters, special characters and first/last name separator (`/`). In some cases, the cardholder name may not be available depending on how the issuer has configured the card. Cardholder name is typically not available on swipe or contactless payments, such as those made with Apple Pay and Google Pay. - `country` string, nullable — Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected. - `description` string, nullable — A high-level description of the type of cards issued in this range. - `exp_month` integer, required — Two-digit number representing the card's expiration month. - `exp_year` integer, required — Four-digit number representing the card's expiration year. - `fingerprint` string, nullable — Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number. *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.* - `funding` string, nullable — Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`. - `issuer` string, nullable — The name of the card's issuing bank. - `last4` string, nullable — The last four digits of the card. - `networks` PaymentMethodCardPresentNetworks - `available` string[], required — All available networks for the card. - `preferred` string, nullable — The preferred network for the card. - `preferred_locales` string[], nullable — EMV tag 5F2D. Preferred languages specified by the integrated circuit chip. - `read_method` 'contact_emv' | 'contactless_emv' | 'contactless_magstripe_mode' | 'magnetic_stripe_fallback' | 'magnetic_stripe_track2', nullable — How card details were read in this transaction. - `kakao_pay` PaymentMethodKakaoPay - `klarna` PaymentMethodKlarna - `dob` PaymentFlowsPrivatePaymentMethodsKlarnaDob - `day` integer, nullable — The day of birth, between 1 and 31. - `month` integer, nullable — The month of birth, between 1 and 12. - `year` integer, nullable — The four-digit year of birth. - `konbini` PaymentMethodKonbini - `kr_card` PaymentMethodKrCard - `brand` 'bc' | 'citi' | 'hana' | 'hyundai' | 'jeju' | 'jeonbuk' | 'kakaobank' | 'kbank' | 'kdbbank' | 'kookmin' | 'kwangju' | 'lotte' | 'mg' | 'nh' | 'post' | 'samsung' | 'savingsbank' | 'shinhan' | 'shinhyup' | 'suhyup' | 'tossbank' | 'woori', nullable — The local credit or debit card brand. - `last4` string, nullable — The last four digits of the card. This may not be present for American Express cards. - `link` PaymentMethodLink - `email` string, nullable — Account owner's email address. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `mobilepay` PaymentMethodMobilepay - `multibanco` PaymentMethodMultibanco - `naver_pay` PaymentMethodNaverPay - `funding` 'card' | 'points', required — Whether to fund this transaction with Naver Pay points or a card. - `object` 'payment_method', required — String representing the object's type. Objects of the same type share the same value. - `oxxo` PaymentMethodOxxo - `p24` PaymentMethodP24 - `bank` 'alior_bank' | 'bank_millennium' | 'bank_nowy_bfg_sa' | 'bank_pekao_sa' | 'banki_spbdzielcze' | 'blik' | 'bnp_paribas' | 'boz' | 'citi_handlowy' | 'credit_agricole' | 'envelobank' | 'etransfer_pocztowy24' | 'getin_bank' | 'ideabank' | 'ing' | 'inteligo' | 'mbank_mtransfer' | 'nest_przelew' | 'noble_pay' | 'pbac_z_ipko' | 'plus_bank' | 'santander_przelew24' | 'tmobile_usbugi_bankowe' | 'toyota_bank' | 'velobank' | 'volkswagen_bank', nullable — The customer's bank, if provided. - `pay_by_bank` PaymentMethodPayByBank - `payco` PaymentMethodPayco - `paynow` PaymentMethodPaynow - `paypal` PaymentMethodPaypal - `country` string, nullable — Two-letter ISO code representing the buyer's country. Values are provided by PayPal directly (if supported) at the time of authorization or settlement. They cannot be set or mutated. - `payer_email` string, nullable — Owner's email. Values are provided by PayPal directly (if supported) at the time of authorization or settlement. They cannot be set or mutated. - `payer_id` string, nullable — PayPal account PayerID. This identifier uniquely identifies the PayPal customer. - `pix` PaymentMethodPix - `promptpay` PaymentMethodPromptpay - `radar_options` RadarRadarOptions — Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information. - `session` string — A [Radar Session](https://stripe.com/docs/radar/radar-session) is a snapshot of the browser metadata and device details that help Radar make more accurate predictions on your payments. - `revolut_pay` PaymentMethodRevolutPay - `samsung_pay` PaymentMethodSamsungPay - `sepa_debit` PaymentMethodSepaDebit - `bank_code` string, nullable — Bank code of bank associated with the bank account. - `branch_code` string, nullable — Branch code of bank associated with the bank account. - `country` string, nullable — Two-letter ISO code representing the country the bank account is located in. - `fingerprint` string, nullable — Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same. - `generated_from` SepaDebitGeneratedFrom - `charge` union — The ID of the Charge that generated this PaymentMethod, if any. - … - `setup_attempt` union — The ID of the SetupAttempt that generated this PaymentMethod, if any. - … - `last4` string, nullable — Last four characters of the IBAN. - `sofort` PaymentMethodSofort - `country` string, nullable — Two-letter ISO code representing the country the bank account is located in. - `swish` PaymentMethodSwish - `twint` PaymentMethodTwint - `type` 'acss_debit' | 'affirm' | 'afterpay_clearpay' | 'alipay' | 'alma' | 'amazon_pay' | 'au_becs_debit' | 'bacs_debit' | 'bancontact' | 'blik' | 'boleto' | 'card' | 'card_present' | 'cashapp' | 'customer_balance' | 'eps' | 'fpx' | 'giropay' | 'grabpay' | 'ideal' | 'interac_present' | 'kakao_pay' | 'klarna' | 'konbini' | 'kr_card' | 'link' | 'mobilepay' | 'multibanco' | 'naver_pay' | 'oxxo' | 'p24' | 'pay_by_bank' | 'payco' | 'paynow' | 'paypal' | 'pix' | 'promptpay' | 'revolut_pay' | 'samsung_pay' | 'sepa_debit' | 'sofort' | 'swish' | 'twint' | 'us_bank_account' | 'wechat_pay' | 'zip', required — The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type. - `us_bank_account` PaymentMethodUsBankAccount - `account_holder_type` 'company' | 'individual', nullable — Account holder type: individual or company. - `account_type` 'checking' | 'savings', nullable — Account type: checkings or savings. Defaults to checking if omitted. - `bank_name` string, nullable — The name of the bank. - `financial_connections_account` string, nullable — The ID of the Financial Connections Account used to create the payment method. - `fingerprint` string, nullable — Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same. - `last4` string, nullable — Last four digits of the bank account number. - `networks` UsBankAccountNetworks - `preferred` string, nullable — The preferred network. - `supported` string[], required — All supported networks. - `routing_number` string, nullable — Routing number of the bank account. - `status_details` PaymentMethodUsBankAccountStatusDetails - `blocked` PaymentMethodUsBankAccountBlocked - … - `wechat_pay` PaymentMethodWechatPay - `zip` PaymentMethodZip - `default_source` union — ID of the default payment source for the subscription. It must belong to the customer associated with the subscription and be in a chargeable state. If `default_payment_method` is also set, `default_payment_method` will take precedence. If neither are set, invoices will use the customer's [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) or [default_source](https://stripe.com/docs/api/customers/object#customer_object-default_source). - string - BankAccount — These bank accounts are payment methods on `Customer` objects. On the other hand [External Accounts](/api#external_accounts) are transfer destinations on `Account` objects for connected accounts. They can be bank accounts or debit cards as well, and are documented in the links above. Related guide: [Bank debits and transfers](/payments/bank-debits-transfers) - `account` union — The ID of the account that the bank account is associated with. - string - Account — This is an object representing a Stripe account. You can retrieve it to see properties on the account like its current requirements or if the account is enabled to make live charges or receive payouts. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts, the properties below are always returned. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, some properties are only returned until you create an [Account Link](/api/account_links) or [Account Session](/api/account_sessions) to start Connect Onboarding. Learn about the [differences between accounts](/connect/accounts). - `business_profile` AccountBusinessProfile - … - `business_type` 'company' | 'government_entity' | 'individual' | 'non_profit', nullable — The business type. After you create an [Account Link](/api/account_links) or [Account Session](/api/account_sessions), this property is only returned for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `capabilities` AccountCapabilities - … - `charges_enabled` boolean — Whether the account can process charges. - `company` LegalEntityCompany - … - `controller` AccountUnificationAccountController - … - `country` string — The account's country. - `created` integer — Time at which the account was connected. Measured in seconds since the Unix epoch. - `default_currency` string — Three-letter ISO currency code representing the default currency for the account. This must be a currency that [Stripe supports in the account's country](https://stripe.com/docs/payouts). - `details_submitted` boolean — Whether account details have been submitted. Accounts with Stripe Dashboard access, which includes Standard accounts, cannot receive payouts before this is true. Accounts where this is false should be directed to [an onboarding flow](/connect/onboarding) to finish submitting account details. - `email` string, nullable — An email address associated with the account. It's not used for authentication and Stripe doesn't market to this field without explicit approval from the platform. - `external_accounts` object — External accounts (bank accounts and debit cards) currently attached to this account. External accounts are only returned for requests where `controller[is_controller]` is true. - … - `future_requirements` AccountFutureRequirements - … - `groups` AccountGroupMembership - … - `id` string, required — Unique identifier for the object. - `individual` Person — This is an object representing a person associated with a Stripe account. A platform cannot access a person for an account where [account.controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, after creating an Account Link or Account Session to start Connect onboarding. See the [Standard onboarding](/connect/standard-accounts) or [Express onboarding](/connect/express-accounts) documentation for information about prefilling information and account onboarding steps. Learn more about [handling identity verification with the API](/connect/handling-api-verification#person-information). - … - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'account', required — String representing the object's type. Objects of the same type share the same value. - `payouts_enabled` boolean — Whether the funds in this account can be paid out. - `requirements` AccountRequirements - … - `settings` AccountSettings - … - `tos_acceptance` AccountTosAcceptance - … - `type` 'custom' | 'express' | 'none' | 'standard' — The Stripe account type. Can be `standard`, `express`, `custom`, or `none`. - `account_holder_name` string, nullable — The name of the person or business that owns the bank account. - `account_holder_type` string, nullable — The type of entity that holds the account. This can be either `individual` or `company`. - `account_type` string, nullable — The bank account type. This can only be `checking` or `savings` in most countries. In Japan, this can only be `futsu` or `toza`. - `available_payout_methods` string[], nullable — A set of available payout methods for this bank account. Only values from this set should be passed as the `method` when creating a payout. - `bank_name` string, nullable — Name of the bank associated with the routing number (e.g., `WELLS FARGO`). - `country` string, required — Two-letter ISO code representing the country the bank account is located in. - `currency` string, currency, required — Three-letter [ISO code for the currency](https://stripe.com/docs/payouts) paid out to the bank account. - `customer` union — The ID of the customer that the bank account is associated with. - string - Customer — This object represents a customer of your business. Use it to [create recurring charges](https://stripe.com/docs/invoicing/customer), [save payment](https://stripe.com/docs/payments/save-during-payment) and contact information, and track payments that belong to the same customer. - `address` Address - … - `balance` integer — The current balance, if any, that's stored on the customer. If negative, the customer has credit to apply to their next invoice. If positive, the customer has an amount owed that's added to their next invoice. The balance only considers amounts that Stripe hasn't successfully applied to any invoice. It doesn't reflect unpaid invoices. This balance is only taken into account after invoices finalize. - `cash_balance` CashBalance — A customer's `Cash balance` represents real funds. Customers can add funds to their cash balance by sending a bank transfer. These funds can be used for payment and can eventually be paid out to your bank account. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, nullable — Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) the customer can be charged in for recurring billing purposes. - `default_source` union — ID of the default payment source for the customer. If you use payment methods created through the PaymentMethods API, see the [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) field instead. - … - `delinquent` boolean, nullable — Tracks the most recent state change on any invoice belonging to the customer. Paying an invoice or marking it uncollectible via the API will set this field to false. An automatic payment failure or passing the `invoice.due_date` will set this field to `true`. If an invoice becomes uncollectible by [dunning](https://stripe.com/docs/billing/automatic-collection), `delinquent` doesn't reset to `false`. If you care whether the customer has paid their most recent subscription invoice, use `subscription.status` instead. Paying or marking uncollectible any customer invoice regardless of whether it is the latest invoice for a subscription will always set this field to `false`. - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `discount` Discount — A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes). It contains information about when the discount began, when it will end, and what it is applied to. Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts) - … - `email` string, nullable — The customer's email address. - `id` string, required — Unique identifier for the object. - `invoice_credit_balance` object — The current multi-currency balances, if any, that's stored on the customer. If positive in a currency, the customer has a credit to apply to their next invoice denominated in that currency. If negative, the customer has an amount owed that's added to their next invoice denominated in that currency. These balances don't apply to unpaid invoices. They solely track amounts that Stripe hasn't successfully applied to any invoice. Stripe only applies a balance in a specific currency to an invoice after that invoice (which is in the same currency) finalizes. - `invoice_prefix` string, nullable — The prefix for the customer used to generate unique invoice numbers. - `invoice_settings` InvoiceSettingCustomerSetting - … - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — The customer's full name or business name. - `next_invoice_sequence` integer — The suffix of the customer's next invoice number (for example, 0001). When the account uses account level sequencing, this parameter is ignored in API requests and the field omitted in API responses. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `phone` string, nullable — The customer's phone number. - `preferred_locales` string[], nullable — The customer's preferred locales (languages), ordered by preference. - `shipping` Shipping - … - `sources` object — The customer's payment sources, if any. - … - `subscriptions` object — The customer's current subscriptions, if any. - … - `tax` CustomerTax - … - `tax_exempt` 'exempt' | 'none' | 'reverse', nullable — Describes the customer's tax exemption status, which is `none`, `exempt`, or `reverse`. When set to `reverse`, invoice and receipt PDFs include the following text: **"Reverse charge"**. - `tax_ids` object — The customer's tax IDs. - … - `test_clock` union — ID of the test clock that this customer belongs to. - … - DeletedCustomer - `deleted` true, required — Always true for a deleted object - `id` string, required — Unique identifier for the object. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `default_for_currency` boolean, nullable — Whether this bank account is the default external account for its currency. - `fingerprint` string, nullable — Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same. - `future_requirements` ExternalAccountRequirements - `currently_due` string[], nullable — Fields that need to be collected to keep the external account enabled. If not collected by `current_deadline`, these fields appear in `past_due` as well, and the account is disabled. - `errors` AccountRequirementsError[], nullable — Fields that are `currently_due` and need to be collected again because validation or verification failed. - `code` 'invalid_address_city_state_postal_code' | 'invalid_address_highway_contract_box' | 'invalid_address_private_mailbox' | 'invalid_business_profile_name' | 'invalid_business_profile_name_denylisted' | 'invalid_company_name_denylisted' | 'invalid_dob_age_over_maximum' | 'invalid_dob_age_under_18' | 'invalid_dob_age_under_minimum' | 'invalid_product_description_length' | 'invalid_product_description_url_match' | 'invalid_representative_country' | 'invalid_statement_descriptor_business_mismatch' | 'invalid_statement_descriptor_denylisted' | 'invalid_statement_descriptor_length' | 'invalid_statement_descriptor_prefix_denylisted' | 'invalid_statement_descriptor_prefix_mismatch' | 'invalid_street_address' | 'invalid_tax_id' | 'invalid_tax_id_format' | 'invalid_tos_acceptance' | 'invalid_url_denylisted' | 'invalid_url_format' | 'invalid_url_web_presence_detected' | 'invalid_url_website_business_information_mismatch' | 'invalid_url_website_empty' | 'invalid_url_website_inaccessible' | 'invalid_url_website_inaccessible_geoblocked' | 'invalid_url_website_inaccessible_password_protected' | 'invalid_url_website_incomplete' | 'invalid_url_website_incomplete_cancellation_policy' | 'invalid_url_website_incomplete_customer_service_details' | 'invalid_url_website_incomplete_legal_restrictions' | 'invalid_url_website_incomplete_refund_policy' | 'invalid_url_website_incomplete_return_policy' | 'invalid_url_website_incomplete_terms_and_conditions' | 'invalid_url_website_incomplete_under_construction' | 'invalid_url_website_other' | 'invalid_value_other' | 'verification_directors_mismatch' | 'verification_document_address_mismatch' | 'verification_document_address_missing' | 'verification_document_corrupt' | 'verification_document_country_not_supported' | 'verification_document_directors_mismatch' | 'verification_document_dob_mismatch' | 'verification_document_duplicate_type' | 'verification_document_expired' | 'verification_document_failed_copy' | 'verification_document_failed_greyscale' | 'verification_document_failed_other' | 'verification_document_failed_test_mode' | 'verification_document_fraudulent' | 'verification_document_id_number_mismatch' | 'verification_document_id_number_missing' | 'verification_document_incomplete' | 'verification_document_invalid' | 'verification_document_issue_or_expiry_date_missing' | 'verification_document_manipulated' | 'verification_document_missing_back' | 'verification_document_missing_front' | 'verification_document_name_mismatch' | 'verification_document_name_missing' | 'verification_document_nationality_mismatch' | 'verification_document_not_readable' | 'verification_document_not_signed' | 'verification_document_not_uploaded' | 'verification_document_photo_mismatch' | 'verification_document_too_large' | 'verification_document_type_not_supported' | 'verification_extraneous_directors' | 'verification_failed_address_match' | 'verification_failed_business_iec_number' | 'verification_failed_document_match' | 'verification_failed_id_number_match' | 'verification_failed_keyed_identity' | 'verification_failed_keyed_match' | 'verification_failed_name_match' | 'verification_failed_other' | 'verification_failed_representative_authority' | 'verification_failed_residential_address' | 'verification_failed_tax_id_match' | 'verification_failed_tax_id_not_issued' | 'verification_missing_directors' | 'verification_missing_executives' | 'verification_missing_owners' | 'verification_requires_additional_memorandum_of_associations' | 'verification_requires_additional_proof_of_registration' | 'verification_supportability', required — The code for the type of error. - `reason` string, required — An informative message that indicates the error type and provides additional details about the error. - `requirement` string, required — The specific user onboarding requirement field (in the requirements hash) that needs to be resolved. - `past_due` string[], nullable — Fields that weren't collected by `current_deadline`. These fields need to be collected to enable the external account. - `pending_verification` string[], nullable — Fields that might become required depending on the results of verification or review. It's an empty array unless an asynchronous verification is pending. If verification fails, these fields move to `eventually_due`, `currently_due`, or `past_due`. Fields might appear in `eventually_due`, `currently_due`, or `past_due` and in `pending_verification` if verification fails but another verification is still pending. - `id` string, required — Unique identifier for the object. - `last4` string, required — The last four digits of the bank account number. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'bank_account', required — String representing the object's type. Objects of the same type share the same value. - `requirements` ExternalAccountRequirements - `currently_due` string[], nullable — Fields that need to be collected to keep the external account enabled. If not collected by `current_deadline`, these fields appear in `past_due` as well, and the account is disabled. - `errors` AccountRequirementsError[], nullable — Fields that are `currently_due` and need to be collected again because validation or verification failed. - `code` 'invalid_address_city_state_postal_code' | 'invalid_address_highway_contract_box' | 'invalid_address_private_mailbox' | 'invalid_business_profile_name' | 'invalid_business_profile_name_denylisted' | 'invalid_company_name_denylisted' | 'invalid_dob_age_over_maximum' | 'invalid_dob_age_under_18' | 'invalid_dob_age_under_minimum' | 'invalid_product_description_length' | 'invalid_product_description_url_match' | 'invalid_representative_country' | 'invalid_statement_descriptor_business_mismatch' | 'invalid_statement_descriptor_denylisted' | 'invalid_statement_descriptor_length' | 'invalid_statement_descriptor_prefix_denylisted' | 'invalid_statement_descriptor_prefix_mismatch' | 'invalid_street_address' | 'invalid_tax_id' | 'invalid_tax_id_format' | 'invalid_tos_acceptance' | 'invalid_url_denylisted' | 'invalid_url_format' | 'invalid_url_web_presence_detected' | 'invalid_url_website_business_information_mismatch' | 'invalid_url_website_empty' | 'invalid_url_website_inaccessible' | 'invalid_url_website_inaccessible_geoblocked' | 'invalid_url_website_inaccessible_password_protected' | 'invalid_url_website_incomplete' | 'invalid_url_website_incomplete_cancellation_policy' | 'invalid_url_website_incomplete_customer_service_details' | 'invalid_url_website_incomplete_legal_restrictions' | 'invalid_url_website_incomplete_refund_policy' | 'invalid_url_website_incomplete_return_policy' | 'invalid_url_website_incomplete_terms_and_conditions' | 'invalid_url_website_incomplete_under_construction' | 'invalid_url_website_other' | 'invalid_value_other' | 'verification_directors_mismatch' | 'verification_document_address_mismatch' | 'verification_document_address_missing' | 'verification_document_corrupt' | 'verification_document_country_not_supported' | 'verification_document_directors_mismatch' | 'verification_document_dob_mismatch' | 'verification_document_duplicate_type' | 'verification_document_expired' | 'verification_document_failed_copy' | 'verification_document_failed_greyscale' | 'verification_document_failed_other' | 'verification_document_failed_test_mode' | 'verification_document_fraudulent' | 'verification_document_id_number_mismatch' | 'verification_document_id_number_missing' | 'verification_document_incomplete' | 'verification_document_invalid' | 'verification_document_issue_or_expiry_date_missing' | 'verification_document_manipulated' | 'verification_document_missing_back' | 'verification_document_missing_front' | 'verification_document_name_mismatch' | 'verification_document_name_missing' | 'verification_document_nationality_mismatch' | 'verification_document_not_readable' | 'verification_document_not_signed' | 'verification_document_not_uploaded' | 'verification_document_photo_mismatch' | 'verification_document_too_large' | 'verification_document_type_not_supported' | 'verification_extraneous_directors' | 'verification_failed_address_match' | 'verification_failed_business_iec_number' | 'verification_failed_document_match' | 'verification_failed_id_number_match' | 'verification_failed_keyed_identity' | 'verification_failed_keyed_match' | 'verification_failed_name_match' | 'verification_failed_other' | 'verification_failed_representative_authority' | 'verification_failed_residential_address' | 'verification_failed_tax_id_match' | 'verification_failed_tax_id_not_issued' | 'verification_missing_directors' | 'verification_missing_executives' | 'verification_missing_owners' | 'verification_requires_additional_memorandum_of_associations' | 'verification_requires_additional_proof_of_registration' | 'verification_supportability', required — The code for the type of error. - `reason` string, required — An informative message that indicates the error type and provides additional details about the error. - `requirement` string, required — The specific user onboarding requirement field (in the requirements hash) that needs to be resolved. - `past_due` string[], nullable — Fields that weren't collected by `current_deadline`. These fields need to be collected to enable the external account. - `pending_verification` string[], nullable — Fields that might become required depending on the results of verification or review. It's an empty array unless an asynchronous verification is pending. If verification fails, these fields move to `eventually_due`, `currently_due`, or `past_due`. Fields might appear in `eventually_due`, `currently_due`, or `past_due` and in `pending_verification` if verification fails but another verification is still pending. - `routing_number` string, nullable — The routing transit number for the bank account. - `status` string, required — For bank accounts, possible values are `new`, `validated`, `verified`, `verification_failed`, or `errored`. A bank account that hasn't had any activity or validation performed is `new`. If Stripe can determine that the bank account exists, its status will be `validated`. Note that there often isn’t enough information to know (e.g., for smaller credit unions), and the validation is not always run. If customer bank account verification has succeeded, the bank account status will be `verified`. If the verification failed for any reason, such as microdeposit failure, the status will be `verification_failed`. If a payout sent to this bank account fails, we'll set the status to `errored` and will not continue to send [scheduled payouts](https://stripe.com/docs/payouts#payout-schedule) until the bank details are updated. For external accounts, possible values are `new`, `errored` and `verification_failed`. If a payout fails, the status is set to `errored` and scheduled payouts are stopped until account details are updated. In the US and India, if we can't [verify the owner of the bank account](https://support.stripe.com/questions/bank-account-ownership-verification), we'll set the status to `verification_failed`. Other validations aren't run against external accounts because they're only used for payouts. This means the other statuses don't apply. - Card — You can store multiple cards on a customer in order to charge the customer later. You can also store multiple debit cards on a recipient in order to transfer to those cards later. Related guide: [Card payments with Sources](https://stripe.com/docs/sources/cards) - `account` union — The account this card belongs to. This attribute will not be in the card object if the card belongs to a customer or recipient instead. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - string - Account — This is an object representing a Stripe account. You can retrieve it to see properties on the account like its current requirements or if the account is enabled to make live charges or receive payouts. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts, the properties below are always returned. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, some properties are only returned until you create an [Account Link](/api/account_links) or [Account Session](/api/account_sessions) to start Connect Onboarding. Learn about the [differences between accounts](/connect/accounts). - `business_profile` AccountBusinessProfile - … - `business_type` 'company' | 'government_entity' | 'individual' | 'non_profit', nullable — The business type. After you create an [Account Link](/api/account_links) or [Account Session](/api/account_sessions), this property is only returned for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `capabilities` AccountCapabilities - … - `charges_enabled` boolean — Whether the account can process charges. - `company` LegalEntityCompany - … - `controller` AccountUnificationAccountController - … - `country` string — The account's country. - `created` integer — Time at which the account was connected. Measured in seconds since the Unix epoch. - `default_currency` string — Three-letter ISO currency code representing the default currency for the account. This must be a currency that [Stripe supports in the account's country](https://stripe.com/docs/payouts). - `details_submitted` boolean — Whether account details have been submitted. Accounts with Stripe Dashboard access, which includes Standard accounts, cannot receive payouts before this is true. Accounts where this is false should be directed to [an onboarding flow](/connect/onboarding) to finish submitting account details. - `email` string, nullable — An email address associated with the account. It's not used for authentication and Stripe doesn't market to this field without explicit approval from the platform. - `external_accounts` object — External accounts (bank accounts and debit cards) currently attached to this account. External accounts are only returned for requests where `controller[is_controller]` is true. - … - `future_requirements` AccountFutureRequirements - … - `groups` AccountGroupMembership - … - `id` string, required — Unique identifier for the object. - `individual` Person — This is an object representing a person associated with a Stripe account. A platform cannot access a person for an account where [account.controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, after creating an Account Link or Account Session to start Connect onboarding. See the [Standard onboarding](/connect/standard-accounts) or [Express onboarding](/connect/express-accounts) documentation for information about prefilling information and account onboarding steps. Learn more about [handling identity verification with the API](/connect/handling-api-verification#person-information). - … - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'account', required — String representing the object's type. Objects of the same type share the same value. - `payouts_enabled` boolean — Whether the funds in this account can be paid out. - `requirements` AccountRequirements - … - `settings` AccountSettings - … - `tos_acceptance` AccountTosAcceptance - … - `type` 'custom' | 'express' | 'none' | 'standard' — The Stripe account type. Can be `standard`, `express`, `custom`, or `none`. - `address_city` string, nullable — City/District/Suburb/Town/Village. - `address_country` string, nullable — Billing address country, if provided when creating card. - `address_line1` string, nullable — Address line 1 (Street address/PO Box/Company name). - `address_line1_check` string, nullable — If `address_line1` was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. - `address_line2` string, nullable — Address line 2 (Apartment/Suite/Unit/Building). - `address_state` string, nullable — State/County/Province/Region. - `address_zip` string, nullable — ZIP or postal code. - `address_zip_check` string, nullable — If `address_zip` was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. - `allow_redisplay` 'always' | 'limited' | 'unspecified', nullable — This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”. - `available_payout_methods` string[], nullable — A set of available payout methods for this card. Only values from this set should be passed as the `method` when creating a payout. - `brand` string, required — Card brand. Can be `American Express`, `Diners Club`, `Discover`, `Eftpos Australia`, `Girocard`, `JCB`, `MasterCard`, `UnionPay`, `Visa`, or `Unknown`. - `country` string, nullable — Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected. - `currency` string, currency, nullable — Three-letter [ISO code for currency](https://www.iso.org/iso-4217-currency-codes.html) in lowercase. Must be a [supported currency](https://docs.stripe.com/currencies). Only applicable on accounts (not customers or recipients). The card can be used as a transfer destination for funds in this currency. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `customer` union — The customer that this card belongs to. This attribute will not be in the card object if the card belongs to an account or recipient instead. - string - Customer — This object represents a customer of your business. Use it to [create recurring charges](https://stripe.com/docs/invoicing/customer), [save payment](https://stripe.com/docs/payments/save-during-payment) and contact information, and track payments that belong to the same customer. - `address` Address - … - `balance` integer — The current balance, if any, that's stored on the customer. If negative, the customer has credit to apply to their next invoice. If positive, the customer has an amount owed that's added to their next invoice. The balance only considers amounts that Stripe hasn't successfully applied to any invoice. It doesn't reflect unpaid invoices. This balance is only taken into account after invoices finalize. - `cash_balance` CashBalance — A customer's `Cash balance` represents real funds. Customers can add funds to their cash balance by sending a bank transfer. These funds can be used for payment and can eventually be paid out to your bank account. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, nullable — Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) the customer can be charged in for recurring billing purposes. - `default_source` union — ID of the default payment source for the customer. If you use payment methods created through the PaymentMethods API, see the [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) field instead. - … - `delinquent` boolean, nullable — Tracks the most recent state change on any invoice belonging to the customer. Paying an invoice or marking it uncollectible via the API will set this field to false. An automatic payment failure or passing the `invoice.due_date` will set this field to `true`. If an invoice becomes uncollectible by [dunning](https://stripe.com/docs/billing/automatic-collection), `delinquent` doesn't reset to `false`. If you care whether the customer has paid their most recent subscription invoice, use `subscription.status` instead. Paying or marking uncollectible any customer invoice regardless of whether it is the latest invoice for a subscription will always set this field to `false`. - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `discount` Discount — A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes). It contains information about when the discount began, when it will end, and what it is applied to. Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts) - … - `email` string, nullable — The customer's email address. - `id` string, required — Unique identifier for the object. - `invoice_credit_balance` object — The current multi-currency balances, if any, that's stored on the customer. If positive in a currency, the customer has a credit to apply to their next invoice denominated in that currency. If negative, the customer has an amount owed that's added to their next invoice denominated in that currency. These balances don't apply to unpaid invoices. They solely track amounts that Stripe hasn't successfully applied to any invoice. Stripe only applies a balance in a specific currency to an invoice after that invoice (which is in the same currency) finalizes. - `invoice_prefix` string, nullable — The prefix for the customer used to generate unique invoice numbers. - `invoice_settings` InvoiceSettingCustomerSetting - … - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — The customer's full name or business name. - `next_invoice_sequence` integer — The suffix of the customer's next invoice number (for example, 0001). When the account uses account level sequencing, this parameter is ignored in API requests and the field omitted in API responses. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `phone` string, nullable — The customer's phone number. - `preferred_locales` string[], nullable — The customer's preferred locales (languages), ordered by preference. - `shipping` Shipping - … - `sources` object — The customer's payment sources, if any. - … - `subscriptions` object — The customer's current subscriptions, if any. - … - `tax` CustomerTax - … - `tax_exempt` 'exempt' | 'none' | 'reverse', nullable — Describes the customer's tax exemption status, which is `none`, `exempt`, or `reverse`. When set to `reverse`, invoice and receipt PDFs include the following text: **"Reverse charge"**. - `tax_ids` object — The customer's tax IDs. - … - `test_clock` union — ID of the test clock that this customer belongs to. - … - DeletedCustomer - `deleted` true, required — Always true for a deleted object - `id` string, required — Unique identifier for the object. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `cvc_check` string, nullable — If a CVC was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. A result of unchecked indicates that CVC was provided but hasn't been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see [Check if a card is valid without a charge](https://support.stripe.com/questions/check-if-a-card-is-valid-without-a-charge). - `default_for_currency` boolean, nullable — Whether this card is the default external account for its currency. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `dynamic_last4` string, nullable — (For tokenized numbers only.) The last four digits of the device account number. - `exp_month` integer, required — Two-digit number representing the card's expiration month. - `exp_year` integer, required — Four-digit number representing the card's expiration year. - `fingerprint` string, nullable — Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number. *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.* - `funding` string, required — Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`. - `id` string, required — Unique identifier for the object. - `iin` string — Issuer identification number of the card. - `last4` string, required — The last four digits of the card. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — Cardholder name. - `networks` TokenCardNetworks - `preferred` string, nullable — The preferred network for co-branded cards. Can be `cartes_bancaires`, `mastercard`, `visa` or `invalid_preference` if requested network is not valid for the card. - `object` 'card', required — String representing the object's type. Objects of the same type share the same value. - `regulated_status` 'regulated' | 'unregulated', nullable — Status of a card based on the card issuer. - `status` string, nullable — For external accounts that are cards, possible values are `new` and `errored`. If a payout fails, the status is set to `errored` and [scheduled payouts](https://stripe.com/docs/payouts#payout-schedule) are stopped until account details are updated. - `tokenization_method` string, nullable — If the card number is tokenized, this is the method that was used. Can be `android_pay` (includes Google Pay), `apple_pay`, `masterpass`, `visa_checkout`, or null. - Source — `Source` objects allow you to accept a variety of payment methods. They represent a customer's payment instrument, and can be used with the Stripe API just like a `Card` object: once chargeable, they can be charged, or can be attached to customers. Stripe doesn't recommend using the deprecated [Sources API](https://stripe.com/docs/api/sources). We recommend that you adopt the [PaymentMethods API](https://stripe.com/docs/api/payment_methods). This newer API provides access to our latest features and payment method types. Related guides: [Sources API](https://stripe.com/docs/sources) and [Sources & Customers](https://stripe.com/docs/sources/customers). - `ach_credit_transfer` SourceTypeAchCreditTransfer - `account_number` string, nullable - `bank_name` string, nullable - `fingerprint` string, nullable - `refund_account_holder_name` string, nullable - `refund_account_holder_type` string, nullable - `refund_routing_number` string, nullable - `routing_number` string, nullable - `swift_code` string, nullable - `ach_debit` SourceTypeAchDebit - `bank_name` string, nullable - `country` string, nullable - `fingerprint` string, nullable - `last4` string, nullable - `routing_number` string, nullable - `type` string, nullable - `acss_debit` SourceTypeAcssDebit - `bank_address_city` string, nullable - `bank_address_line_1` string, nullable - `bank_address_line_2` string, nullable - `bank_address_postal_code` string, nullable - `bank_name` string, nullable - `category` string, nullable - `country` string, nullable - `fingerprint` string, nullable - `last4` string, nullable - `routing_number` string, nullable - `alipay` SourceTypeAlipay - `data_string` string, nullable - `native_url` string, nullable - `statement_descriptor` string, nullable - `allow_redisplay` 'always' | 'limited' | 'unspecified', nullable — This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”. - `amount` integer, nullable — A positive integer in the smallest currency unit (that is, 100 cents for $1.00, or 1 for ¥1, Japanese Yen being a zero-decimal currency) representing the total amount associated with the source. This is the amount for which the source will be chargeable once ready. Required for `single_use` sources. - `au_becs_debit` SourceTypeAuBecsDebit - `bsb_number` string, nullable - `fingerprint` string, nullable - `last4` string, nullable - `bancontact` SourceTypeBancontact - `bank_code` string, nullable - `bank_name` string, nullable - `bic` string, nullable - `iban_last4` string, nullable - `preferred_language` string, nullable - `statement_descriptor` string, nullable - `card` SourceTypeCard - `address_line1_check` string, nullable - `address_zip_check` string, nullable - `brand` string, nullable - `country` string, nullable - `cvc_check` string, nullable - `dynamic_last4` string, nullable - `exp_month` integer, nullable - `exp_year` integer, nullable - `fingerprint` string - `funding` string, nullable - `last4` string, nullable - `name` string, nullable - `three_d_secure` string - `tokenization_method` string, nullable - `card_present` SourceTypeCardPresent - `application_cryptogram` string - `application_preferred_name` string - `authorization_code` string, nullable - `authorization_response_code` string - `brand` string, nullable - `country` string, nullable - `cvm_type` string - `data_type` string, nullable - `dedicated_file_name` string - `emv_auth_data` string - `evidence_customer_signature` string, nullable - `evidence_transaction_certificate` string, nullable - `exp_month` integer, nullable - `exp_year` integer, nullable - `fingerprint` string - `funding` string, nullable - `last4` string, nullable - `pos_device_id` string, nullable - `pos_entry_mode` string - `read_method` string, nullable - `reader` string, nullable - `terminal_verification_results` string - `transaction_status_information` string - `client_secret` string, required — The client secret of the source. Used for client-side retrieval using a publishable key. - `code_verification` SourceCodeVerificationFlow - `attempts_remaining` integer, required — The number of attempts remaining to authenticate the source object with a verification code. - `status` string, required — The status of the code verification, either `pending` (awaiting verification, `attempts_remaining` should be greater than 0), `succeeded` (successful verification) or `failed` (failed verification, cannot be verified anymore as `attempts_remaining` should be 0). - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, nullable — Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) associated with the source. This is the currency for which the source will be chargeable once ready. Required for `single_use` sources. - `customer` string — The ID of the customer to which this source is attached. This will not be present when the source has not been attached to a customer. - `eps` SourceTypeEps - `reference` string, nullable - `statement_descriptor` string, nullable - `flow` string, required — The authentication `flow` of the source. `flow` is one of `redirect`, `receiver`, `code_verification`, `none`. - `giropay` SourceTypeGiropay - `bank_code` string, nullable - `bank_name` string, nullable - `bic` string, nullable - `statement_descriptor` string, nullable - `id` string, required — Unique identifier for the object. - `ideal` SourceTypeIdeal - `bank` string, nullable - `bic` string, nullable - `iban_last4` string, nullable - `statement_descriptor` string, nullable - `klarna` SourceTypeKlarna - `background_image_url` string - `client_token` string, nullable - `first_name` string - `last_name` string - `locale` string - `logo_url` string - `page_title` string - `pay_later_asset_urls_descriptive` string - `pay_later_asset_urls_standard` string - `pay_later_name` string - `pay_later_redirect_url` string - `pay_now_asset_urls_descriptive` string - `pay_now_asset_urls_standard` string - `pay_now_name` string - `pay_now_redirect_url` string - `pay_over_time_asset_urls_descriptive` string - `pay_over_time_asset_urls_standard` string - `pay_over_time_name` string - `pay_over_time_redirect_url` string - `payment_method_categories` string - `purchase_country` string - `purchase_type` string - `redirect_url` string - `shipping_delay` integer - `shipping_first_name` string - `shipping_last_name` string - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `multibanco` SourceTypeMultibanco - `entity` string, nullable - `reference` string, nullable - `refund_account_holder_address_city` string, nullable - `refund_account_holder_address_country` string, nullable - `refund_account_holder_address_line1` string, nullable - `refund_account_holder_address_line2` string, nullable - `refund_account_holder_address_postal_code` string, nullable - `refund_account_holder_address_state` string, nullable - `refund_account_holder_name` string, nullable - `refund_iban` string, nullable - `object` 'source', required — String representing the object's type. Objects of the same type share the same value. - `owner` SourceOwner - `address` Address - `city` string, nullable — City, district, suburb, town, or village. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `line1` string, nullable — Address line 1 (e.g., street, PO Box, or company name). - `line2` string, nullable — Address line 2 (e.g., apartment, suite, unit, or building). - `postal_code` string, nullable — ZIP or postal code. - `state` string, nullable — State, county, province, or region. - `email` string, nullable — Owner's email address. - `name` string, nullable — Owner's full name. - `phone` string, nullable — Owner's phone number (including extension). - `verified_address` Address - `city` string, nullable — City, district, suburb, town, or village. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `line1` string, nullable — Address line 1 (e.g., street, PO Box, or company name). - `line2` string, nullable — Address line 2 (e.g., apartment, suite, unit, or building). - `postal_code` string, nullable — ZIP or postal code. - `state` string, nullable — State, county, province, or region. - `verified_email` string, nullable — Verified owner's email address. Verified values are verified or provided by the payment method directly (and if supported) at the time of authorization or settlement. They cannot be set or mutated. - `verified_name` string, nullable — Verified owner's full name. Verified values are verified or provided by the payment method directly (and if supported) at the time of authorization or settlement. They cannot be set or mutated. - `verified_phone` string, nullable — Verified owner's phone number (including extension). Verified values are verified or provided by the payment method directly (and if supported) at the time of authorization or settlement. They cannot be set or mutated. - `p24` SourceTypeP24 - `reference` string, nullable - `receiver` SourceReceiverFlow - `address` string, nullable — The address of the receiver source. This is the value that should be communicated to the customer to send their funds to. - `amount_charged` integer, required — The total amount that was moved to your balance. This is almost always equal to the amount charged. In rare cases when customers deposit excess funds and we are unable to refund those, those funds get moved to your balance and show up in amount_charged as well. The amount charged is expressed in the source's currency. - `amount_received` integer, required — The total amount received by the receiver source. `amount_received = amount_returned + amount_charged` should be true for consumed sources unless customers deposit excess funds. The amount received is expressed in the source's currency. - `amount_returned` integer, required — The total amount that was returned to the customer. The amount returned is expressed in the source's currency. - `refund_attributes_method` string, required — Type of refund attribute method, one of `email`, `manual`, or `none`. - `refund_attributes_status` string, required — Type of refund attribute status, one of `missing`, `requested`, or `available`. - `redirect` SourceRedirectFlow - `failure_reason` string, nullable — The failure reason for the redirect, either `user_abort` (the customer aborted or dropped out of the redirect flow), `declined` (the authentication failed or the transaction was declined), or `processing_error` (the redirect failed due to a technical error). Present only if the redirect status is `failed`. - `return_url` string, required — The URL you provide to redirect the customer to after they authenticated their payment. - `status` string, required — The status of the redirect, either `pending` (ready to be used by your customer to authenticate the transaction), `succeeded` (succesful authentication, cannot be reused) or `not_required` (redirect should not be used) or `failed` (failed authentication, cannot be reused). - `url` string, required — The URL provided to you to redirect a customer to as part of a `redirect` authentication flow. - `sepa_debit` SourceTypeSepaDebit - `bank_code` string, nullable - `branch_code` string, nullable - `country` string, nullable - `fingerprint` string, nullable - `last4` string, nullable - `mandate_reference` string, nullable - `mandate_url` string, nullable - `sofort` SourceTypeSofort - `bank_code` string, nullable - `bank_name` string, nullable - `bic` string, nullable - `country` string, nullable - `iban_last4` string, nullable - `preferred_language` string, nullable - `statement_descriptor` string, nullable - `source_order` SourceOrder - `amount` integer, required — A positive integer in the smallest currency unit (that is, 100 cents for $1.00, or 1 for ¥1, Japanese Yen being a zero-decimal currency) representing the total amount for the order. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `email` string — The email address of the customer placing the order. - `items` SourceOrderItem[], nullable — List of items constituting the order. - `amount` integer, nullable — The amount (price) for this order item. - `currency` string, nullable — This currency of this order item. Required when `amount` is present. - `description` string, nullable — Human-readable description for this order item. - `parent` string, nullable — The ID of the associated object for this line item. Expandable if not null (e.g., expandable to a SKU). - `quantity` integer — The quantity of this order item. When type is `sku`, this is the number of instances of the SKU to be ordered. - `type` string, nullable — The type of this order item. Must be `sku`, `tax`, or `shipping`. - `shipping` Shipping - `address` Address - … - `carrier` string, nullable — The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc. - `name` string — Recipient name. - `phone` string, nullable — Recipient phone (including extension). - `tracking_number` string, nullable — The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas. - `statement_descriptor` string, nullable — Extra information about a source. This will appear on your customer's statement every time you charge the source. - `status` string, required — The status of the source, one of `canceled`, `chargeable`, `consumed`, `failed`, or `pending`. Only `chargeable` sources can be used to create a charge. - `three_d_secure` SourceTypeThreeDSecure - `address_line1_check` string, nullable - `address_zip_check` string, nullable - `authenticated` boolean, nullable - `brand` string, nullable - `card` string, nullable - `country` string, nullable - `customer` string, nullable - `cvc_check` string, nullable - `dynamic_last4` string, nullable - `exp_month` integer, nullable - `exp_year` integer, nullable - `fingerprint` string - `funding` string, nullable - `last4` string, nullable - `name` string, nullable - `three_d_secure` string - `tokenization_method` string, nullable - `type` 'ach_credit_transfer' | 'ach_debit' | 'acss_debit' | 'alipay' | 'au_becs_debit' | 'bancontact' | 'card' | 'card_present' | 'eps' | 'giropay' | 'ideal' | 'klarna' | 'multibanco' | 'p24' | 'sepa_debit' | 'sofort' | 'three_d_secure' | 'wechat', required — The `type` of the source. The `type` is a payment method, one of `ach_credit_transfer`, `ach_debit`, `alipay`, `bancontact`, `card`, `card_present`, `eps`, `giropay`, `ideal`, `multibanco`, `klarna`, `p24`, `sepa_debit`, `sofort`, `three_d_secure`, or `wechat`. An additional hash is included on the source with a name matching this value. It contains additional information specific to the [payment method](https://stripe.com/docs/sources) used. - `usage` string, nullable — Either `reusable` or `single_use`. Whether this source should be reusable or not. Some source types may or may not be reusable by construction, while others may leave the option at creation. If an incompatible value is passed, an error will be returned. - `wechat` SourceTypeWechat - `prepay_id` string - `qr_code_url` string, nullable - `statement_descriptor` string - `default_tax_rates` TaxRate[], nullable — The tax rates that will apply to any subscription item that does not have `tax_rates` set. Invoices created will have their `default_tax_rates` populated from the subscription. - `active` boolean, required — Defaults to `true`. When set to `false`, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `description` string, nullable — An arbitrary string attached to the tax rate for your internal use only. It will not be visible to your customers. - `display_name` string, required — The display name of the tax rates as it will appear to your customer on their receipt email, PDF, and the hosted invoice page. - `effective_percentage` number, nullable — Actual/effective tax rate percentage out of 100. For tax calculations with automatic_tax[enabled]=true, this percentage reflects the rate actually used to calculate tax based on the product's taxability and whether the user is registered to collect taxes in the corresponding jurisdiction. - `flat_amount` TaxRateFlatAmount — The amount of the tax rate when the `rate_type`` is `flat_amount`. Tax rates with `rate_type` `percentage` can vary based on the transaction, resulting in this field being `null`. This field exposes the amount and currency of the flat tax rate. - `amount` integer, required — Amount of the tax when the `rate_type` is `flat_amount`. This positive integer represents how much to charge in the smallest currency unit (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99). - `currency` string, required — Three-letter ISO currency code, in lowercase. - `id` string, required — Unique identifier for the object. - `inclusive` boolean, required — This specifies if the tax rate is inclusive or exclusive. - `jurisdiction` string, nullable — The jurisdiction for the tax rate. You can use this label field for tax reporting purposes. It also appears on your customer’s invoice. - `jurisdiction_level` 'city' | 'country' | 'county' | 'district' | 'multiple' | 'state', nullable — The level of the jurisdiction that imposes this tax rate. Will be `null` for manually defined tax rates. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'tax_rate', required — String representing the object's type. Objects of the same type share the same value. - `percentage` number, required — Tax rate percentage out of 100. For tax calculations with automatic_tax[enabled]=true, this percentage includes the statutory tax rate of non-taxable jurisdictions. - `rate_type` 'flat_amount' | 'percentage', nullable — Indicates the type of tax rate applied to the taxable amount. This value can be `null` when no tax applies to the location. - `state` string, nullable — [ISO 3166-2 subdivision code](https://en.wikipedia.org/wiki/ISO_3166-2:US), without country prefix. For example, "NY" for New York, United States. - `tax_type` 'amusement_tax' | 'communications_tax' | 'gst' | 'hst' | 'igst' | 'jct' | 'lease_tax' | 'pst' | 'qst' | 'retail_delivery_fee' | 'rst' | 'sales_tax' | 'service_tax' | 'vat', nullable — The high-level tax type, such as `vat` or `sales_tax`. - `description` string, nullable — The subscription's description, meant to be displayable to the customer. Use this field to optionally store an explanation of the subscription for rendering in Stripe surfaces and certain local payment methods UIs. - `discount` Discount — A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes). It contains information about when the discount began, when it will end, and what it is applied to. Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts) - `checkout_session` string, nullable — The Checkout session that this coupon is applied to, if it is applied to a particular session in payment mode. Will not be present for subscription mode. - `coupon` Coupon, required — A coupon contains information about a percent-off or amount-off discount you might want to apply to a customer. Coupons may be applied to [subscriptions](https://stripe.com/docs/api#subscriptions), [invoices](https://stripe.com/docs/api#invoices), [checkout sessions](https://stripe.com/docs/api/checkout/sessions), [quotes](https://stripe.com/docs/api#quotes), and more. Coupons do not work with conventional one-off [charges](https://stripe.com/docs/api#create_charge) or [payment intents](https://stripe.com/docs/api/payment_intents). - `amount_off` integer, nullable — Amount (in the `currency` specified) that will be taken off the subtotal of any invoices for this customer. - `applies_to` CouponAppliesTo - `products` string[], required — A list of product IDs this coupon applies to - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, nullable — If `amount_off` has been set, the three-letter [ISO code for the currency](https://stripe.com/docs/currencies) of the amount to take off. - `currency_options` object — Coupons defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies). - `duration` 'forever' | 'once' | 'repeating', required — One of `forever`, `once`, and `repeating`. Describes how long a customer who applies this coupon will get the discount. - `duration_in_months` integer, nullable — If `duration` is `repeating`, the number of months the coupon applies. Null if coupon `duration` is `forever` or `once`. - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `max_redemptions` integer, nullable — Maximum number of times this coupon can be redeemed, in total, across all customers, before it is no longer valid. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — Name of the coupon displayed to customers on for instance invoices or receipts. - `object` 'coupon', required — String representing the object's type. Objects of the same type share the same value. - `percent_off` number, nullable — Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with percent_off of 50 will make a $ (or local equivalent)100 invoice $ (or local equivalent)50 instead. - `redeem_by` integer, nullable — Date after which the coupon can no longer be redeemed. - `times_redeemed` integer, required — Number of times this coupon has been applied to a customer. - `valid` boolean, required — Taking account of the above properties, whether this coupon can still be applied to a customer. - `customer` union — The ID of the customer associated with this discount. - string - Customer — This object represents a customer of your business. Use it to [create recurring charges](https://stripe.com/docs/invoicing/customer), [save payment](https://stripe.com/docs/payments/save-during-payment) and contact information, and track payments that belong to the same customer. - `address` Address - `city` string, nullable — City, district, suburb, town, or village. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `line1` string, nullable — Address line 1 (e.g., street, PO Box, or company name). - `line2` string, nullable — Address line 2 (e.g., apartment, suite, unit, or building). - `postal_code` string, nullable — ZIP or postal code. - `state` string, nullable — State, county, province, or region. - `balance` integer — The current balance, if any, that's stored on the customer. If negative, the customer has credit to apply to their next invoice. If positive, the customer has an amount owed that's added to their next invoice. The balance only considers amounts that Stripe hasn't successfully applied to any invoice. It doesn't reflect unpaid invoices. This balance is only taken into account after invoices finalize. - `cash_balance` CashBalance — A customer's `Cash balance` represents real funds. Customers can add funds to their cash balance by sending a bank transfer. These funds can be used for payment and can eventually be paid out to your bank account. - `available` object, nullable — A hash of all cash balances available to this customer. You cannot delete a customer with any cash balances, even if the balance is 0. Amounts are represented in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal). - `customer` string, required — The ID of the customer whose cash balance this object represents. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `object` 'cash_balance', required — String representing the object's type. Objects of the same type share the same value. - `settings` CustomerBalanceCustomerBalanceSettings, required - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, nullable — Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) the customer can be charged in for recurring billing purposes. - `default_source` union — ID of the default payment source for the customer. If you use payment methods created through the PaymentMethods API, see the [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) field instead. - string - BankAccount — These bank accounts are payment methods on `Customer` objects. On the other hand [External Accounts](/api#external_accounts) are transfer destinations on `Account` objects for connected accounts. They can be bank accounts or debit cards as well, and are documented in the links above. Related guide: [Bank debits and transfers](/payments/bank-debits-transfers) - … - Card — You can store multiple cards on a customer in order to charge the customer later. You can also store multiple debit cards on a recipient in order to transfer to those cards later. Related guide: [Card payments with Sources](https://stripe.com/docs/sources/cards) - … - Source — `Source` objects allow you to accept a variety of payment methods. They represent a customer's payment instrument, and can be used with the Stripe API just like a `Card` object: once chargeable, they can be charged, or can be attached to customers. Stripe doesn't recommend using the deprecated [Sources API](https://stripe.com/docs/api/sources). We recommend that you adopt the [PaymentMethods API](https://stripe.com/docs/api/payment_methods). This newer API provides access to our latest features and payment method types. Related guides: [Sources API](https://stripe.com/docs/sources) and [Sources & Customers](https://stripe.com/docs/sources/customers). - … - `delinquent` boolean, nullable — Tracks the most recent state change on any invoice belonging to the customer. Paying an invoice or marking it uncollectible via the API will set this field to false. An automatic payment failure or passing the `invoice.due_date` will set this field to `true`. If an invoice becomes uncollectible by [dunning](https://stripe.com/docs/billing/automatic-collection), `delinquent` doesn't reset to `false`. If you care whether the customer has paid their most recent subscription invoice, use `subscription.status` instead. Paying or marking uncollectible any customer invoice regardless of whether it is the latest invoice for a subscription will always set this field to `false`. - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `discount` Discount — recursive - `email` string, nullable — The customer's email address. - `id` string, required — Unique identifier for the object. - `invoice_credit_balance` object — The current multi-currency balances, if any, that's stored on the customer. If positive in a currency, the customer has a credit to apply to their next invoice denominated in that currency. If negative, the customer has an amount owed that's added to their next invoice denominated in that currency. These balances don't apply to unpaid invoices. They solely track amounts that Stripe hasn't successfully applied to any invoice. Stripe only applies a balance in a specific currency to an invoice after that invoice (which is in the same currency) finalizes. - `invoice_prefix` string, nullable — The prefix for the customer used to generate unique invoice numbers. - `invoice_settings` InvoiceSettingCustomerSetting - `custom_fields` InvoiceSettingCustomField[], nullable — Default custom fields to be displayed on invoices for this customer. - … - `default_payment_method` union — ID of a payment method that's attached to the customer, to be used as the customer's default payment method for subscriptions and invoices. - … - `footer` string, nullable — Default footer to be displayed on invoices for this customer. - `rendering_options` InvoiceSettingCustomerRenderingOptions - … - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — The customer's full name or business name. - `next_invoice_sequence` integer — The suffix of the customer's next invoice number (for example, 0001). When the account uses account level sequencing, this parameter is ignored in API requests and the field omitted in API responses. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `phone` string, nullable — The customer's phone number. - `preferred_locales` string[], nullable — The customer's preferred locales (languages), ordered by preference. - `shipping` Shipping - `address` Address - … - `carrier` string, nullable — The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc. - `name` string — Recipient name. - `phone` string, nullable — Recipient phone (including extension). - `tracking_number` string, nullable — The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas. - `sources` object — The customer's payment sources, if any. - `data` union[], required — Details about each object. - … - `has_more` boolean, required — True if this list has another page of items after this one that can be fetched. - `object` 'list', required — String representing the object's type. Objects of the same type share the same value. Always has the value `list`. - `url` string, required — The URL where this list can be accessed. - `subscriptions` object — The customer's current subscriptions, if any. - `data` Subscription[], required — Details about each object. - `has_more` boolean, required — True if this list has another page of items after this one that can be fetched. - `object` 'list', required — String representing the object's type. Objects of the same type share the same value. Always has the value `list`. - `url` string, required — The URL where this list can be accessed. - `tax` CustomerTax - `automatic_tax` 'failed' | 'not_collecting' | 'supported' | 'unrecognized_location', required — Surfaces if automatic tax computation is possible given the current customer location information. - `ip_address` string, nullable — A recent IP address of the customer used for tax reporting and tax location inference. - `location` CustomerTaxLocation - … - `tax_exempt` 'exempt' | 'none' | 'reverse', nullable — Describes the customer's tax exemption status, which is `none`, `exempt`, or `reverse`. When set to `reverse`, invoice and receipt PDFs include the following text: **"Reverse charge"**. - `tax_ids` object — The customer's tax IDs. - `data` TaxId[], required — Details about each object. - … - `has_more` boolean, required — True if this list has another page of items after this one that can be fetched. - `object` 'list', required — String representing the object's type. Objects of the same type share the same value. Always has the value `list`. - `url` string, required — The URL where this list can be accessed. - `test_clock` union — ID of the test clock that this customer belongs to. - string - TestHelpersTestClock — A test clock enables deterministic control over objects in testmode. With a test clock, you can create objects at a frozen time in the past or future, and advance to a specific future time to observe webhooks and state changes. After the clock advances, you can either validate the current state of your scenario (and test your assumptions), change the current state of your scenario (and test more complex scenarios), or keep advancing forward in time. - … - DeletedCustomer - `deleted` true, required — Always true for a deleted object - `id` string, required — Unique identifier for the object. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `end` integer, nullable — If the coupon has a duration of `repeating`, the date that this discount will end. If the coupon has a duration of `once` or `forever`, this attribute will be null. - `id` string, required — The ID of the discount object. Discounts cannot be fetched by ID. Use `expand[]=discounts` in API calls to expand discount IDs in an array. - `invoice` string, nullable — The invoice that the discount's coupon was applied to, if it was applied directly to a particular invoice. - `invoice_item` string, nullable — The invoice item `id` (or invoice line item `id` for invoice line items of type='subscription') that the discount's coupon was applied to, if it was applied directly to a particular invoice item or invoice line item. - `object` 'discount', required — String representing the object's type. Objects of the same type share the same value. - `promotion_code` union — The promotion code applied to create this discount. - string - PromotionCode — A Promotion Code represents a customer-redeemable code for a [coupon](https://stripe.com/docs/api#coupons). It can be used to create multiple codes for a single coupon. - `active` boolean, required — Whether the promotion code is currently active. A promotion code is only active if the coupon is also valid. - `code` string, required — The customer-facing code. Regardless of case, this code must be unique across all active promotion codes for each customer. Valid characters are lower case letters (a-z), upper case letters (A-Z), and digits (0-9). - `coupon` Coupon, required — A coupon contains information about a percent-off or amount-off discount you might want to apply to a customer. Coupons may be applied to [subscriptions](https://stripe.com/docs/api#subscriptions), [invoices](https://stripe.com/docs/api#invoices), [checkout sessions](https://stripe.com/docs/api/checkout/sessions), [quotes](https://stripe.com/docs/api#quotes), and more. Coupons do not work with conventional one-off [charges](https://stripe.com/docs/api#create_charge) or [payment intents](https://stripe.com/docs/api/payment_intents). - `amount_off` integer, nullable — Amount (in the `currency` specified) that will be taken off the subtotal of any invoices for this customer. - `applies_to` CouponAppliesTo - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, nullable — If `amount_off` has been set, the three-letter [ISO code for the currency](https://stripe.com/docs/currencies) of the amount to take off. - `currency_options` object — Coupons defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies). - `duration` 'forever' | 'once' | 'repeating', required — One of `forever`, `once`, and `repeating`. Describes how long a customer who applies this coupon will get the discount. - `duration_in_months` integer, nullable — If `duration` is `repeating`, the number of months the coupon applies. Null if coupon `duration` is `forever` or `once`. - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `max_redemptions` integer, nullable — Maximum number of times this coupon can be redeemed, in total, across all customers, before it is no longer valid. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — Name of the coupon displayed to customers on for instance invoices or receipts. - `object` 'coupon', required — String representing the object's type. Objects of the same type share the same value. - `percent_off` number, nullable — Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with percent_off of 50 will make a $ (or local equivalent)100 invoice $ (or local equivalent)50 instead. - `redeem_by` integer, nullable — Date after which the coupon can no longer be redeemed. - `times_redeemed` integer, required — Number of times this coupon has been applied to a customer. - `valid` boolean, required — Taking account of the above properties, whether this coupon can still be applied to a customer. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `customer` union — The customer that this promotion code can be used by. - string - Customer — This object represents a customer of your business. Use it to [create recurring charges](https://stripe.com/docs/invoicing/customer), [save payment](https://stripe.com/docs/payments/save-during-payment) and contact information, and track payments that belong to the same customer. - … - DeletedCustomer - … - `expires_at` integer, nullable — Date at which the promotion code can no longer be redeemed. - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `max_redemptions` integer, nullable — Maximum number of times this promotion code can be redeemed. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'promotion_code', required — String representing the object's type. Objects of the same type share the same value. - `restrictions` PromotionCodesResourceRestrictions, required - `currency_options` object — Promotion code restrictions defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies). - `first_time_transaction` boolean, required — A Boolean indicating if the Promotion Code should only be redeemed for Customers without any successful payments or invoices - `minimum_amount` integer, nullable — Minimum amount required to redeem this Promotion Code into a Coupon (e.g., a purchase must be $100 or more to work). - `minimum_amount_currency` string, nullable — Three-letter [ISO code](https://stripe.com/docs/currencies) for minimum_amount - `times_redeemed` integer, required — Number of times this promotion code has been used. - `start` integer, required — Date that the coupon was applied. - `subscription` string, nullable — The subscription that this coupon is applied to, if it is applied to a particular subscription. - `subscription_item` string, nullable — The subscription item that this coupon is applied to, if it is applied to a particular subscription item. - `discounts` union[], required — The discounts applied to the subscription. Subscription item discounts are applied before subscription discounts. Use `expand[]=discounts` to expand each discount. - union - string - Discount — A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes). It contains information about when the discount began, when it will end, and what it is applied to. Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts) - `checkout_session` string, nullable — The Checkout session that this coupon is applied to, if it is applied to a particular session in payment mode. Will not be present for subscription mode. - `coupon` Coupon, required — A coupon contains information about a percent-off or amount-off discount you might want to apply to a customer. Coupons may be applied to [subscriptions](https://stripe.com/docs/api#subscriptions), [invoices](https://stripe.com/docs/api#invoices), [checkout sessions](https://stripe.com/docs/api/checkout/sessions), [quotes](https://stripe.com/docs/api#quotes), and more. Coupons do not work with conventional one-off [charges](https://stripe.com/docs/api#create_charge) or [payment intents](https://stripe.com/docs/api/payment_intents). - `amount_off` integer, nullable — Amount (in the `currency` specified) that will be taken off the subtotal of any invoices for this customer. - `applies_to` CouponAppliesTo - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, nullable — If `amount_off` has been set, the three-letter [ISO code for the currency](https://stripe.com/docs/currencies) of the amount to take off. - `currency_options` object — Coupons defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies). - `duration` 'forever' | 'once' | 'repeating', required — One of `forever`, `once`, and `repeating`. Describes how long a customer who applies this coupon will get the discount. - `duration_in_months` integer, nullable — If `duration` is `repeating`, the number of months the coupon applies. Null if coupon `duration` is `forever` or `once`. - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `max_redemptions` integer, nullable — Maximum number of times this coupon can be redeemed, in total, across all customers, before it is no longer valid. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — Name of the coupon displayed to customers on for instance invoices or receipts. - `object` 'coupon', required — String representing the object's type. Objects of the same type share the same value. - `percent_off` number, nullable — Percent that will be taken off the subtotal of any invoices for this customer for the duration of the coupon. For example, a coupon with percent_off of 50 will make a $ (or local equivalent)100 invoice $ (or local equivalent)50 instead. - `redeem_by` integer, nullable — Date after which the coupon can no longer be redeemed. - `times_redeemed` integer, required — Number of times this coupon has been applied to a customer. - `valid` boolean, required — Taking account of the above properties, whether this coupon can still be applied to a customer. - `customer` union — The ID of the customer associated with this discount. - string - Customer — This object represents a customer of your business. Use it to [create recurring charges](https://stripe.com/docs/invoicing/customer), [save payment](https://stripe.com/docs/payments/save-during-payment) and contact information, and track payments that belong to the same customer. - … - DeletedCustomer - … - `end` integer, nullable — If the coupon has a duration of `repeating`, the date that this discount will end. If the coupon has a duration of `once` or `forever`, this attribute will be null. - `id` string, required — The ID of the discount object. Discounts cannot be fetched by ID. Use `expand[]=discounts` in API calls to expand discount IDs in an array. - `invoice` string, nullable — The invoice that the discount's coupon was applied to, if it was applied directly to a particular invoice. - `invoice_item` string, nullable — The invoice item `id` (or invoice line item `id` for invoice line items of type='subscription') that the discount's coupon was applied to, if it was applied directly to a particular invoice item or invoice line item. - `object` 'discount', required — String representing the object's type. Objects of the same type share the same value. - `promotion_code` union — The promotion code applied to create this discount. - string - PromotionCode — A Promotion Code represents a customer-redeemable code for a [coupon](https://stripe.com/docs/api#coupons). It can be used to create multiple codes for a single coupon. - … - `start` integer, required — Date that the coupon was applied. - `subscription` string, nullable — The subscription that this coupon is applied to, if it is applied to a particular subscription. - `subscription_item` string, nullable — The subscription item that this coupon is applied to, if it is applied to a particular subscription item. - `ended_at` integer, nullable — If the subscription has ended, the date the subscription ended. - `id` string, required — Unique identifier for the object. - `invoice_settings` SubscriptionsResourceSubscriptionInvoiceSettings, required - `account_tax_ids` union[], nullable — The account tax IDs associated with the subscription. Will be set on invoices generated by the subscription. - union - string - TaxId — You can add one or multiple tax IDs to a [customer](https://stripe.com/docs/api/customers) or account. Customer and account tax IDs get displayed on related invoices and credit notes. Related guides: [Customer tax identification numbers](https://stripe.com/docs/billing/taxes/tax-ids), [Account tax IDs](https://stripe.com/docs/invoicing/connect#account-tax-ids) - `country` string, nullable — Two-letter ISO code representing the country of the tax ID. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `customer` union — ID of the customer. - … - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `object` 'tax_id', required — String representing the object's type. Objects of the same type share the same value. - `owner` TaxIDsOwner - … - `type` 'ad_nrt' | 'ae_trn' | 'al_tin' | 'am_tin' | 'ao_tin' | 'ar_cuit' | 'au_abn' | 'au_arn' | 'ba_tin' | 'bb_tin' | 'bg_uic' | 'bh_vat' | 'bo_tin' | 'br_cnpj' | 'br_cpf' | 'bs_tin' | 'by_tin' | 'ca_bn' | 'ca_gst_hst' | 'ca_pst_bc' | 'ca_pst_mb' | 'ca_pst_sk' | 'ca_qst' | 'cd_nif' | 'ch_uid' | 'ch_vat' | 'cl_tin' | 'cn_tin' | 'co_nit' | 'cr_tin' | 'de_stn' | 'do_rcn' | 'ec_ruc' | 'eg_tin' | 'es_cif' | 'eu_oss_vat' | 'eu_vat' | 'gb_vat' | 'ge_vat' | 'gn_nif' | 'hk_br' | 'hr_oib' | 'hu_tin' | 'id_npwp' | 'il_vat' | 'in_gst' | 'is_vat' | 'jp_cn' | 'jp_rn' | 'jp_trn' | 'ke_pin' | 'kh_tin' | 'kr_brn' | 'kz_bin' | 'li_uid' | 'li_vat' | 'ma_vat' | 'md_vat' | 'me_pib' | 'mk_vat' | 'mr_nif' | 'mx_rfc' | 'my_frp' | 'my_itn' | 'my_sst' | 'ng_tin' | 'no_vat' | 'no_voec' | 'np_pan' | 'nz_gst' | 'om_vat' | 'pe_ruc' | 'ph_tin' | 'ro_tin' | 'rs_pib' | 'ru_inn' | 'ru_kpp' | 'sa_vat' | 'sg_gst' | 'sg_uen' | 'si_tin' | 'sn_ninea' | 'sr_fin' | 'sv_nit' | 'th_vat' | 'tj_tin' | 'tr_tin' | 'tw_vat' | 'tz_vat' | 'ua_vat' | 'ug_tin' | 'unknown' | 'us_ein' | 'uy_ruc' | 'uz_tin' | 'uz_vat' | 've_rif' | 'vn_tin' | 'za_vat' | 'zm_tin' | 'zw_tin', required — Type of the tax ID, one of `ad_nrt`, `ae_trn`, `al_tin`, `am_tin`, `ao_tin`, `ar_cuit`, `au_abn`, `au_arn`, `ba_tin`, `bb_tin`, `bg_uic`, `bh_vat`, `bo_tin`, `br_cnpj`, `br_cpf`, `bs_tin`, `by_tin`, `ca_bn`, `ca_gst_hst`, `ca_pst_bc`, `ca_pst_mb`, `ca_pst_sk`, `ca_qst`, `cd_nif`, `ch_uid`, `ch_vat`, `cl_tin`, `cn_tin`, `co_nit`, `cr_tin`, `de_stn`, `do_rcn`, `ec_ruc`, `eg_tin`, `es_cif`, `eu_oss_vat`, `eu_vat`, `gb_vat`, `ge_vat`, `gn_nif`, `hk_br`, `hr_oib`, `hu_tin`, `id_npwp`, `il_vat`, `in_gst`, `is_vat`, `jp_cn`, `jp_rn`, `jp_trn`, `ke_pin`, `kh_tin`, `kr_brn`, `kz_bin`, `li_uid`, `li_vat`, `ma_vat`, `md_vat`, `me_pib`, `mk_vat`, `mr_nif`, `mx_rfc`, `my_frp`, `my_itn`, `my_sst`, `ng_tin`, `no_vat`, `no_voec`, `np_pan`, `nz_gst`, `om_vat`, `pe_ruc`, `ph_tin`, `ro_tin`, `rs_pib`, `ru_inn`, `ru_kpp`, `sa_vat`, `sg_gst`, `sg_uen`, `si_tin`, `sn_ninea`, `sr_fin`, `sv_nit`, `th_vat`, `tj_tin`, `tr_tin`, `tw_vat`, `tz_vat`, `ua_vat`, `ug_tin`, `us_ein`, `uy_ruc`, `uz_tin`, `uz_vat`, `ve_rif`, `vn_tin`, `za_vat`, `zm_tin`, or `zw_tin`. Note that some legacy tax IDs have type `unknown` - `value` string, required — Value of the tax ID. - `verification` TaxIdVerification - … - DeletedTaxId - `deleted` true, required — Always true for a deleted object - `id` string, required — Unique identifier for the object. - `object` 'tax_id', required — String representing the object's type. Objects of the same type share the same value. - `issuer` ConnectAccountReference, required - `account` union — The connected account being referenced when `type` is `account`. - string - Account — This is an object representing a Stripe account. You can retrieve it to see properties on the account like its current requirements or if the account is enabled to make live charges or receive payouts. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts, the properties below are always returned. For accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, some properties are only returned until you create an [Account Link](/api/account_links) or [Account Session](/api/account_sessions) to start Connect Onboarding. Learn about the [differences between accounts](/connect/accounts). - `business_profile` AccountBusinessProfile - … - `business_type` 'company' | 'government_entity' | 'individual' | 'non_profit', nullable — The business type. After you create an [Account Link](/api/account_links) or [Account Session](/api/account_sessions), this property is only returned for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `capabilities` AccountCapabilities - … - `charges_enabled` boolean — Whether the account can process charges. - `company` LegalEntityCompany - … - `controller` AccountUnificationAccountController - … - `country` string — The account's country. - `created` integer — Time at which the account was connected. Measured in seconds since the Unix epoch. - `default_currency` string — Three-letter ISO currency code representing the default currency for the account. This must be a currency that [Stripe supports in the account's country](https://stripe.com/docs/payouts). - `details_submitted` boolean — Whether account details have been submitted. Accounts with Stripe Dashboard access, which includes Standard accounts, cannot receive payouts before this is true. Accounts where this is false should be directed to [an onboarding flow](/connect/onboarding) to finish submitting account details. - `email` string, nullable — An email address associated with the account. It's not used for authentication and Stripe doesn't market to this field without explicit approval from the platform. - `external_accounts` object — External accounts (bank accounts and debit cards) currently attached to this account. External accounts are only returned for requests where `controller[is_controller]` is true. - … - `future_requirements` AccountFutureRequirements - … - `groups` AccountGroupMembership - … - `id` string, required — Unique identifier for the object. - `individual` Person — This is an object representing a person associated with a Stripe account. A platform cannot access a person for an account where [account.controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `stripe`, which includes Standard and Express accounts, after creating an Account Link or Account Session to start Connect onboarding. See the [Standard onboarding](/connect/standard-accounts) or [Express onboarding](/connect/express-accounts) documentation for information about prefilling information and account onboarding steps. Learn more about [handling identity verification with the API](/connect/handling-api-verification#person-information). - … - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'account', required — String representing the object's type. Objects of the same type share the same value. - `payouts_enabled` boolean — Whether the funds in this account can be paid out. - `requirements` AccountRequirements - … - `settings` AccountSettings - … - `tos_acceptance` AccountTosAcceptance - … - `type` 'custom' | 'express' | 'none' | 'standard' — The Stripe account type. Can be `standard`, `express`, `custom`, or `none`. - `type` 'account' | 'self', required — Type of the account referenced. - `items` object, required — List of subscription items, each with an attached price. - `data` SubscriptionItem[], required — Details about each object. - `billing_thresholds` SubscriptionItemBillingThresholds - `usage_gte` integer, nullable — Usage threshold that triggers the subscription to create an invoice - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `discounts` union[], required — The discounts applied to the subscription item. Subscription item discounts are applied before subscription discounts. Use `expand[]=discounts` to expand each discount. - union - string - Discount — A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes). It contains information about when the discount began, when it will end, and what it is applied to. Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts) - … - `id` string, required — Unique identifier for the object. - `metadata` object, required — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'subscription_item', required — String representing the object's type. Objects of the same type share the same value. - `price` Price, required — Prices define the unit cost, currency, and (optional) billing cycle for both recurring and one-time purchases of products. [Products](https://stripe.com/docs/api#products) help you track inventory or provisioning, and prices help you track payment terms. Different physical goods or levels of service should be represented by products, and pricing options should be represented by prices. This approach lets you change prices without having to change your provisioning scheme. For example, you might have a single "gold" product that has prices for $10/month, $100/year, and €9 once. Related guides: [Set up a subscription](https://stripe.com/docs/billing/subscriptions/set-up-subscription), [create an invoice](https://stripe.com/docs/billing/invoices/create), and more about [products and prices](https://stripe.com/docs/products-prices/overview). - `active` boolean, required — Whether the price can be used for new purchases. - `billing_scheme` 'per_unit' | 'tiered', required — Describes how to compute the price per period. Either `per_unit` or `tiered`. `per_unit` indicates that the fixed amount (specified in `unit_amount` or `unit_amount_decimal`) will be charged per unit in `quantity` (for prices with `usage_type=licensed`), or per unit of total usage (for prices with `usage_type=metered`). `tiered` indicates that the unit pricing will be computed using a tiering strategy as defined using the `tiers` and `tiers_mode` attributes. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `currency_options` object — Prices defined in each available currency option. Each key must be a three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html) and a [supported currency](https://stripe.com/docs/currencies). - `custom_unit_amount` CustomUnitAmount - `maximum` integer, nullable — The maximum unit amount the customer can specify for this item. - `minimum` integer, nullable — The minimum unit amount the customer can specify for this item. Must be at least the minimum charge amount. - `preset` integer, nullable — The starting unit amount which can be updated by the customer. - `id` string, required — Unique identifier for the object. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `lookup_key` string, nullable — A lookup key used to retrieve prices dynamically from a static string. This may be up to 200 characters. - `metadata` object, required — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `nickname` string, nullable — A brief description of the price, hidden from customers. - `object` 'price', required — String representing the object's type. Objects of the same type share the same value. - `product` union, required — The ID of the product this price is associated with. - string - Product — Products describe the specific goods or services you offer to your customers. For example, you might offer a Standard and Premium version of your goods or service; each version would be a separate Product. They can be used in conjunction with [Prices](https://stripe.com/docs/api#prices) to configure pricing in Payment Links, Checkout, and Subscriptions. Related guides: [Set up a subscription](https://stripe.com/docs/billing/subscriptions/set-up-subscription), [share a Payment Link](https://stripe.com/docs/payment-links), [accept payments with Checkout](https://stripe.com/docs/payments/accept-a-payment#create-product-prices-upfront), and more about [Products and Prices](https://stripe.com/docs/products-prices/overview) - … - DeletedProduct - … - `recurring` Recurring - `aggregate_usage` 'last_during_period' | 'last_ever' | 'max' | 'sum', nullable — Specifies a usage aggregation strategy for prices of `usage_type=metered`. Defaults to `sum`. - `interval` 'day' | 'month' | 'week' | 'year', required — The frequency at which a subscription is billed. One of `day`, `week`, `month` or `year`. - `interval_count` integer, required — The number of intervals (specified in the `interval` attribute) between subscription billings. For example, `interval=month` and `interval_count=3` bills every 3 months. - `meter` string, nullable — The meter tracking the usage of a metered price - `usage_type` 'licensed' | 'metered', required — Configures how the quantity per period should be determined. Can be either `metered` or `licensed`. `licensed` automatically bills the `quantity` set when adding it to a subscription. `metered` aggregates the total usage based on usage records. Defaults to `licensed`. - `tax_behavior` 'exclusive' | 'inclusive' | 'unspecified', nullable — Only required if a [default tax behavior](https://stripe.com/docs/tax/products-prices-tax-categories-tax-behavior#setting-a-default-tax-behavior-(recommended)) was not provided in the Stripe Tax settings. Specifies whether the price is considered inclusive of taxes or exclusive of taxes. One of `inclusive`, `exclusive`, or `unspecified`. Once specified as either `inclusive` or `exclusive`, it cannot be changed. - `tiers` PriceTier[] — Each element represents a pricing tier. This parameter requires `billing_scheme` to be set to `tiered`. See also the documentation for `billing_scheme`. - `flat_amount` integer, nullable — Price for the entire tier. - `flat_amount_decimal` string, decimal, nullable — Same as `flat_amount`, but contains a decimal value with at most 12 decimal places. - `unit_amount` integer, nullable — Per unit price for units relevant to the tier. - `unit_amount_decimal` string, decimal, nullable — Same as `unit_amount`, but contains a decimal value with at most 12 decimal places. - `up_to` integer, nullable — Up to and including to this quantity will be contained in the tier. - `tiers_mode` 'graduated' | 'volume', nullable — Defines if the tiering price should be `graduated` or `volume` based. In `volume`-based tiering, the maximum quantity within a period determines the per unit price. In `graduated` tiering, pricing can change as the quantity grows. - `transform_quantity` TransformQuantity - `divide_by` integer, required — Divide usage by this number. - `round` 'down' | 'up', required — After division, either round the result `up` or `down`. - `type` 'one_time' | 'recurring', required — One of `one_time` or `recurring` depending on whether the price is for a one-time purchase or a recurring (subscription) purchase. - `unit_amount` integer, nullable — The unit amount in cents (or local equivalent) to be charged, represented as a whole integer if possible. Only set if `billing_scheme=per_unit`. - `unit_amount_decimal` string, decimal, nullable — The unit amount in cents (or local equivalent) to be charged, represented as a decimal string with at most 12 decimal places. Only set if `billing_scheme=per_unit`. - `quantity` integer — The [quantity](https://stripe.com/docs/subscriptions/quantities) of the plan to which the customer should be subscribed. - `subscription` string, required — The `subscription` this `subscription_item` belongs to. - `tax_rates` TaxRate[], nullable — The tax rates which apply to this `subscription_item`. When set, the `default_tax_rates` on the subscription do not apply to this `subscription_item`. - `active` boolean, required — Defaults to `true`. When set to `false`, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `description` string, nullable — An arbitrary string attached to the tax rate for your internal use only. It will not be visible to your customers. - `display_name` string, required — The display name of the tax rates as it will appear to your customer on their receipt email, PDF, and the hosted invoice page. - `effective_percentage` number, nullable — Actual/effective tax rate percentage out of 100. For tax calculations with automatic_tax[enabled]=true, this percentage reflects the rate actually used to calculate tax based on the product's taxability and whether the user is registered to collect taxes in the corresponding jurisdiction. - `flat_amount` TaxRateFlatAmount — The amount of the tax rate when the `rate_type`` is `flat_amount`. Tax rates with `rate_type` `percentage` can vary based on the transaction, resulting in this field being `null`. This field exposes the amount and currency of the flat tax rate. - `amount` integer, required — Amount of the tax when the `rate_type` is `flat_amount`. This positive integer represents how much to charge in the smallest currency unit (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99). - `currency` string, required — Three-letter ISO currency code, in lowercase. - `id` string, required — Unique identifier for the object. - `inclusive` boolean, required — This specifies if the tax rate is inclusive or exclusive. - `jurisdiction` string, nullable — The jurisdiction for the tax rate. You can use this label field for tax reporting purposes. It also appears on your customer’s invoice. - `jurisdiction_level` 'city' | 'country' | 'county' | 'district' | 'multiple' | 'state', nullable — The level of the jurisdiction that imposes this tax rate. Will be `null` for manually defined tax rates. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'tax_rate', required — String representing the object's type. Objects of the same type share the same value. - `percentage` number, required — Tax rate percentage out of 100. For tax calculations with automatic_tax[enabled]=true, this percentage includes the statutory tax rate of non-taxable jurisdictions. - `rate_type` 'flat_amount' | 'percentage', nullable — Indicates the type of tax rate applied to the taxable amount. This value can be `null` when no tax applies to the location. - `state` string, nullable — [ISO 3166-2 subdivision code](https://en.wikipedia.org/wiki/ISO_3166-2:US), without country prefix. For example, "NY" for New York, United States. - `tax_type` 'amusement_tax' | 'communications_tax' | 'gst' | 'hst' | 'igst' | 'jct' | 'lease_tax' | 'pst' | 'qst' | 'retail_delivery_fee' | 'rst' | 'sales_tax' | 'service_tax' | 'vat', nullable — The high-level tax type, such as `vat` or `sales_tax`. - `has_more` boolean, required — True if this list has another page of items after this one that can be fetched. - `object` 'list', required — String representing the object's type. Objects of the same type share the same value. Always has the value `list`. - `url` string, required — The URL where this list can be accessed. - `latest_invoice` union — The most recent invoice this subscription has generated. - string - Invoice — Invoices are statements of amounts owed by a customer, and are either generated one-off, or generated periodically from a subscription. They contain [invoice items](https://stripe.com/docs/api#invoiceitems), and proration adjustments that may be caused by subscription upgrades/downgrades (if necessary). If your invoice is configured to be billed through automatic charges, Stripe automatically finalizes your invoice and attempts payment. Note that finalizing the invoice, [when automatic](https://stripe.com/docs/invoicing/integration/automatic-advancement-collection), does not happen immediately as the invoice is created. Stripe waits until one hour after the last webhook was successfully sent (or the last webhook timed out after failing). If you (and the platforms you may have connected to) have no webhooks configured, Stripe waits one hour after creation to finalize the invoice. If your invoice is configured to be billed by sending an email, then based on your [email settings](https://dashboard.stripe.com/account/billing/automatic), Stripe will email the invoice to your customer and await payment. These emails can contain a link to a hosted page to pay the invoice. Stripe applies any customer credit on the account before determining the amount due for the invoice (i.e., the amount that will be actually charged). If the amount due for the invoice is less than Stripe's [minimum allowed charge per currency](/docs/currencies#minimum-and-maximum-charge-amounts), the invoice is automatically marked paid, and we add the amount due to the customer's credit balance which is applied to the next invoice. More details on the customer's credit balance are [here](https://stripe.com/docs/billing/customer/balance). Related guide: [Send invoices to customers](https://stripe.com/docs/billing/invoices/sending) - `account_country` string, nullable — The country of the business associated with this invoice, most often the business creating the invoice. - `account_name` string, nullable — The public name of the business associated with this invoice, most often the business creating the invoice. - `account_tax_ids` union[], nullable — The account tax IDs associated with the invoice. Only editable when the invoice is a draft. - union - string - TaxId — You can add one or multiple tax IDs to a [customer](https://stripe.com/docs/api/customers) or account. Customer and account tax IDs get displayed on related invoices and credit notes. Related guides: [Customer tax identification numbers](https://stripe.com/docs/billing/taxes/tax-ids), [Account tax IDs](https://stripe.com/docs/invoicing/connect#account-tax-ids) - … - DeletedTaxId - … - `amount_due` integer, required — Final amount due at this time for this invoice. If the invoice's total is smaller than the minimum charge amount, for example, or if there is account credit that can be applied to the invoice, the `amount_due` may be 0. If there is a positive `starting_balance` for the invoice (the customer owes money), the `amount_due` will also take that into account. The charge that gets generated for the invoice will be for the amount specified in `amount_due`. - `amount_paid` integer, required — The amount, in cents (or local equivalent), that was paid. - `amount_remaining` integer, required — The difference between amount_due and amount_paid, in cents (or local equivalent). - `amount_shipping` integer, required — This is the sum of all the shipping amounts. - `application` union — ID of the Connect Application that created the invoice. - string - Application - `id` string, required — Unique identifier for the object. - `name` string, nullable — The name of the application. - `object` 'application', required — String representing the object's type. Objects of the same type share the same value. - DeletedApplication - `deleted` true, required — Always true for a deleted object - `id` string, required — Unique identifier for the object. - `name` string, nullable — The name of the application. - `object` 'application', required — String representing the object's type. Objects of the same type share the same value. - `application_fee_amount` integer, nullable — The fee in cents (or local equivalent) that will be applied to the invoice and transferred to the application owner's Stripe account when the invoice is paid. - `attempt_count` integer, required — Number of payment attempts made for this invoice, from the perspective of the payment retry schedule. Any payment attempt counts as the first attempt, and subsequently only automatic retries increment the attempt count. In other words, manual payment attempts after the first attempt do not affect the retry schedule. If a failure is returned with a non-retryable return code, the invoice can no longer be retried unless a new payment method is obtained. Retries will continue to be scheduled, and attempt_count will continue to increment, but retries will only be executed if a new payment method is obtained. - `attempted` boolean, required — Whether an attempt has been made to pay the invoice. An invoice is not attempted until 1 hour after the `invoice.created` webhook, for example, so you might not want to display that invoice as unpaid to your users. - `auto_advance` boolean — Controls whether Stripe performs [automatic collection](https://stripe.com/docs/invoicing/integration/automatic-advancement-collection) of the invoice. If `false`, the invoice's state doesn't automatically advance without an explicit action. - `automatic_tax` AutomaticTax, required - `disabled_reason` 'finalization_requires_location_inputs' | 'finalization_system_error', nullable — If Stripe disabled automatic tax, this enum describes why. - `enabled` boolean, required — Whether Stripe automatically computes tax on this invoice. Note that incompatible invoice items (invoice items with manually specified [tax rates](https://stripe.com/docs/api/tax_rates), negative amounts, or `tax_behavior=unspecified`) cannot be added to automatic tax invoices. - `liability` ConnectAccountReference - `account` union — The connected account being referenced when `type` is `account`. - … - `type` 'account' | 'self', required — Type of the account referenced. - `status` 'complete' | 'failed' | 'requires_location_inputs', nullable — The status of the most recent automated tax calculation for this invoice. - `automatically_finalizes_at` integer, nullable — The time when this invoice is currently scheduled to be automatically finalized. The field will be `null` if the invoice is not scheduled to finalize in the future. If the invoice is not in the draft state, this field will always be `null` - see `finalized_at` for the time when an already-finalized invoice was finalized. - `billing_reason` 'automatic_pending_invoice_item_invoice' | 'manual' | 'quote_accept' | 'subscription' | 'subscription_create' | 'subscription_cycle' | 'subscription_threshold' | 'subscription_update' | 'upcoming', nullable — Indicates the reason why the invoice was created. * `manual`: Unrelated to a subscription, for example, created via the invoice editor. * `subscription`: No longer in use. Applies to subscriptions from before May 2018 where no distinction was made between updates, cycles, and thresholds. * `subscription_create`: A new subscription was created. * `subscription_cycle`: A subscription advanced into a new period. * `subscription_threshold`: A subscription reached a billing threshold. * `subscription_update`: A subscription was updated. * `upcoming`: Reserved for simulated invoices, per the upcoming invoice endpoint. - `charge` union — ID of the latest charge generated for this invoice, if any. - string - Charge — The `Charge` object represents a single attempt to move money into your Stripe account. PaymentIntent confirmation is the most common way to create Charges, but transferring money to a different Stripe account through Connect also creates Charges. Some legacy payment flows create Charges directly, which is not recommended for new integrations. - `amount` integer, required — Amount intended to be collected by this payment. A positive integer representing how much to charge in the [smallest currency unit](https://stripe.com/docs/currencies#zero-decimal) (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The minimum amount is $0.50 US or [equivalent in charge currency](https://stripe.com/docs/currencies#minimum-and-maximum-charge-amounts). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99). - `amount_captured` integer, required — Amount in cents (or local equivalent) captured (can be less than the amount attribute on the charge if a partial capture was made). - `amount_refunded` integer, required — Amount in cents (or local equivalent) refunded (can be less than the amount attribute on the charge if a partial refund was issued). - `application` union — ID of the Connect application that created the charge. - … - `application_fee` union — The application fee (if any) for the charge. [See the Connect documentation](https://stripe.com/docs/connect/direct-charges#collect-fees) for details. - … - `application_fee_amount` integer, nullable — The amount of the application fee (if any) requested for the charge. [See the Connect documentation](https://stripe.com/docs/connect/direct-charges#collect-fees) for details. - `balance_transaction` union — ID of the balance transaction that describes the impact of this charge on your account balance (not including refunds or disputes). - … - `billing_details` BillingDetails, required - … - `calculated_statement_descriptor` string, nullable — The full statement descriptor that is passed to card networks, and that is displayed on your customers' credit card and bank statements. Allows you to see what the statement descriptor looks like after the static and dynamic portions are combined. This value only exists for card payments. - `captured` boolean, required — If the charge was created without capturing, this Boolean represents whether it is still uncaptured or has since been captured. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `customer` union — ID of the customer this charge is for if one exists. - … - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `disputed` boolean, required — Whether the charge has been disputed. - `failure_balance_transaction` union — ID of the balance transaction that describes the reversal of the balance on your account due to payment failure. - … - `failure_code` string, nullable — Error code explaining reason for charge failure if available (see [the errors section](https://stripe.com/docs/error-codes) for a list of codes). - `failure_message` string, nullable — Message to user further explaining reason for charge failure if available. - `fraud_details` ChargeFraudDetails - … - `id` string, required — Unique identifier for the object. - `invoice` union — ID of the invoice this charge is for if one exists. - … - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object, required — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'charge', required — String representing the object's type. Objects of the same type share the same value. - `on_behalf_of` union — The account (if any) the charge was made on behalf of without triggering an automatic transfer. See the [Connect documentation](https://stripe.com/docs/connect/separate-charges-and-transfers) for details. - … - `outcome` ChargeOutcome - … - `paid` boolean, required — `true` if the charge succeeded, or was successfully authorized for later capture. - `payment_intent` union — ID of the PaymentIntent associated with this charge, if one exists. - … - `payment_method` string, nullable — ID of the payment method used in this charge. - `payment_method_details` PaymentMethodDetails - … - `radar_options` RadarRadarOptions — Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information. - … - `receipt_email` string, nullable — This is the email address that the receipt for this charge was sent to. - `receipt_number` string, nullable — This is the transaction number that appears on email receipts sent for this charge. This attribute will be `null` until a receipt has been sent. - `receipt_url` string, nullable — This is the URL to view the receipt for this charge. The receipt is kept up-to-date to the latest state of the charge, including any refunds. If the charge is for an Invoice, the receipt will be stylized as an Invoice receipt. - `refunded` boolean, required — Whether the charge has been fully refunded. If the charge is only partially refunded, this attribute will still be false. - `refunds` object, nullable — A list of refunds that have been applied to the charge. - … - `review` union — ID of the review associated with this charge if one exists. - … - `shipping` Shipping - … - `source_transfer` union — The transfer ID which created this charge. Only present if the charge came from another Stripe account. [See the Connect documentation](https://docs.stripe.com/connect/destination-charges) for details. - … - `statement_descriptor` string, nullable — For a non-card charge, text that appears on the customer's statement as the statement descriptor. This value overrides the account's default statement descriptor. For information about requirements, including the 22-character limit, see [the Statement Descriptor docs](https://docs.stripe.com/get-started/account/statement-descriptors). For a card charge, this value is ignored unless you don't specify a `statement_descriptor_suffix`, in which case this value is used as the suffix. - `statement_descriptor_suffix` string, nullable — Provides information about a card charge. Concatenated to the account's [statement descriptor prefix](https://docs.stripe.com/get-started/account/statement-descriptors#static) to form the complete statement descriptor that appears on the customer's statement. If the account has no prefix value, the suffix is concatenated to the account's statement descriptor. - `status` 'failed' | 'pending' | 'succeeded', required — The status of the payment is either `succeeded`, `pending`, or `failed`. - `transfer` union — ID of the transfer to the `destination` account (only applicable if the charge was created using the `destination` parameter). - … - `transfer_data` ChargeTransferData - … - `transfer_group` string, nullable — A string that identifies this transaction as part of a group. See the [Connect documentation](https://stripe.com/docs/connect/separate-charges-and-transfers#transfer-options) for details. - `collection_method` 'charge_automatically' | 'send_invoice', required — Either `charge_automatically`, or `send_invoice`. When charging automatically, Stripe will attempt to pay this invoice using the default source attached to the customer. When sending an invoice, Stripe will email this invoice to the customer with payment instructions. - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, required — Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies). - `custom_fields` InvoiceSettingCustomField[], nullable — Custom fields displayed on the invoice. - `name` string, required — The name of the custom field. - `value` string, required — The value of the custom field. - `customer` union — The ID of the customer who will be billed. - string - Customer — This object represents a customer of your business. Use it to [create recurring charges](https://stripe.com/docs/invoicing/customer), [save payment](https://stripe.com/docs/payments/save-during-payment) and contact information, and track payments that belong to the same customer. - `address` Address - … - `balance` integer — The current balance, if any, that's stored on the customer. If negative, the customer has credit to apply to their next invoice. If positive, the customer has an amount owed that's added to their next invoice. The balance only considers amounts that Stripe hasn't successfully applied to any invoice. It doesn't reflect unpaid invoices. This balance is only taken into account after invoices finalize. - `cash_balance` CashBalance — A customer's `Cash balance` represents real funds. Customers can add funds to their cash balance by sending a bank transfer. These funds can be used for payment and can eventually be paid out to your bank account. - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, nullable — Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) the customer can be charged in for recurring billing purposes. - `default_source` union — ID of the default payment source for the customer. If you use payment methods created through the PaymentMethods API, see the [invoice_settings.default_payment_method](https://stripe.com/docs/api/customers/object#customer_object-invoice_settings-default_payment_method) field instead. - … - `delinquent` boolean, nullable — Tracks the most recent state change on any invoice belonging to the customer. Paying an invoice or marking it uncollectible via the API will set this field to false. An automatic payment failure or passing the `invoice.due_date` will set this field to `true`. If an invoice becomes uncollectible by [dunning](https://stripe.com/docs/billing/automatic-collection), `delinquent` doesn't reset to `false`. If you care whether the customer has paid their most recent subscription invoice, use `subscription.status` instead. Paying or marking uncollectible any customer invoice regardless of whether it is the latest invoice for a subscription will always set this field to `false`. - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. - `discount` Discount — A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes). It contains information about when the discount began, when it will end, and what it is applied to. Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts) - … - `email` string, nullable — The customer's email address. - `id` string, required — Unique identifier for the object. - `invoice_credit_balance` object — The current multi-currency balances, if any, that's stored on the customer. If positive in a currency, the customer has a credit to apply to their next invoice denominated in that currency. If negative, the customer has an amount owed that's added to their next invoice denominated in that currency. These balances don't apply to unpaid invoices. They solely track amounts that Stripe hasn't successfully applied to any invoice. Stripe only applies a balance in a specific currency to an invoice after that invoice (which is in the same currency) finalizes. - `invoice_prefix` string, nullable — The prefix for the customer used to generate unique invoice numbers. - `invoice_settings` InvoiceSettingCustomerSetting - … - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — The customer's full name or business name. - `next_invoice_sequence` integer — The suffix of the customer's next invoice number (for example, 0001). When the account uses account level sequencing, this parameter is ignored in API requests and the field omitted in API responses. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `phone` string, nullable — The customer's phone number. - `preferred_locales` string[], nullable — The customer's preferred locales (languages), ordered by preference. - `shipping` Shipping - … - `sources` object — The customer's payment sources, if any. - … - `subscriptions` object — The customer's current subscriptions, if any. - … - `tax` CustomerTax - … - `tax_exempt` 'exempt' | 'none' | 'reverse', nullable — Describes the customer's tax exemption status, which is `none`, `exempt`, or `reverse`. When set to `reverse`, invoice and receipt PDFs include the following text: **"Reverse charge"**. - `tax_ids` object — The customer's tax IDs. - … - `test_clock` union — ID of the test clock that this customer belongs to. - … - DeletedCustomer - `deleted` true, required — Always true for a deleted object - `id` string, required — Unique identifier for the object. - `object` 'customer', required — String representing the object's type. Objects of the same type share the same value. - `customer_address` Address - `city` string, nullable — City, district, suburb, town, or village. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `line1` string, nullable — Address line 1 (e.g., street, PO Box, or company name). - `line2` string, nullable — Address line 2 (e.g., apartment, suite, unit, or building). - `postal_code` string, nullable — ZIP or postal code. - `state` string, nullable — State, county, province, or region. - `customer_email` string, nullable — The customer's email. Until the invoice is finalized, this field will equal `customer.email`. Once the invoice is finalized, this field will no longer be updated. - `customer_name` string, nullable — The customer's name. Until the invoice is finalized, this field will equal `customer.name`. Once the invoice is finalized, this field will no longer be updated. - `customer_phone` string, nullable — The customer's phone number. Until the invoice is finalized, this field will equal `customer.phone`. Once the invoice is finalized, this field will no longer be updated. - `customer_shipping` Shipping - `address` Address - `city` string, nullable — City, district, suburb, town, or village. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `line1` string, nullable — Address line 1 (e.g., street, PO Box, or company name). - `line2` string, nullable — Address line 2 (e.g., apartment, suite, unit, or building). - `postal_code` string, nullable — ZIP or postal code. - `state` string, nullable — State, county, province, or region. - `carrier` string, nullable — The delivery service that shipped a physical product, such as Fedex, UPS, USPS, etc. - `name` string — Recipient name. - `phone` string, nullable — Recipient phone (including extension). - `tracking_number` string, nullable — The tracking number for a physical product, obtained from the delivery service. If multiple tracking numbers were generated for this purchase, please separate them with commas. - `customer_tax_exempt` 'exempt' | 'none' | 'reverse', nullable — The customer's tax exempt status. Until the invoice is finalized, this field will equal `customer.tax_exempt`. Once the invoice is finalized, this field will no longer be updated. - `customer_tax_ids` InvoicesResourceInvoiceTaxId[], nullable — The customer's tax IDs. Until the invoice is finalized, this field will contain the same tax IDs as `customer.tax_ids`. Once the invoice is finalized, this field will no longer be updated. - `type` 'ad_nrt' | 'ae_trn' | 'al_tin' | 'am_tin' | 'ao_tin' | 'ar_cuit' | 'au_abn' | 'au_arn' | 'ba_tin' | 'bb_tin' | 'bg_uic' | 'bh_vat' | 'bo_tin' | 'br_cnpj' | 'br_cpf' | 'bs_tin' | 'by_tin' | 'ca_bn' | 'ca_gst_hst' | 'ca_pst_bc' | 'ca_pst_mb' | 'ca_pst_sk' | 'ca_qst' | 'cd_nif' | 'ch_uid' | 'ch_vat' | 'cl_tin' | 'cn_tin' | 'co_nit' | 'cr_tin' | 'de_stn' | 'do_rcn' | 'ec_ruc' | 'eg_tin' | 'es_cif' | 'eu_oss_vat' | 'eu_vat' | 'gb_vat' | 'ge_vat' | 'gn_nif' | 'hk_br' | 'hr_oib' | 'hu_tin' | 'id_npwp' | 'il_vat' | 'in_gst' | 'is_vat' | 'jp_cn' | 'jp_rn' | 'jp_trn' | 'ke_pin' | 'kh_tin' | 'kr_brn' | 'kz_bin' | 'li_uid' | 'li_vat' | 'ma_vat' | 'md_vat' | 'me_pib' | 'mk_vat' | 'mr_nif' | 'mx_rfc' | 'my_frp' | 'my_itn' | 'my_sst' | 'ng_tin' | 'no_vat' | 'no_voec' | 'np_pan' | 'nz_gst' | 'om_vat' | 'pe_ruc' | 'ph_tin' | 'ro_tin' | 'rs_pib' | 'ru_inn' | 'ru_kpp' | 'sa_vat' | 'sg_gst' | 'sg_uen' | 'si_tin' | 'sn_ninea' | 'sr_fin' | 'sv_nit' | 'th_vat' | 'tj_tin' | 'tr_tin' | 'tw_vat' | 'tz_vat' | 'ua_vat' | 'ug_tin' | 'unknown' | 'us_ein' | 'uy_ruc' | 'uz_tin' | 'uz_vat' | 've_rif' | 'vn_tin' | 'za_vat' | 'zm_tin' | 'zw_tin', required — The type of the tax ID, one of `ad_nrt`, `ar_cuit`, `eu_vat`, `bo_tin`, `br_cnpj`, `br_cpf`, `cn_tin`, `co_nit`, `cr_tin`, `do_rcn`, `ec_ruc`, `eu_oss_vat`, `hr_oib`, `pe_ruc`, `ro_tin`, `rs_pib`, `sv_nit`, `uy_ruc`, `ve_rif`, `vn_tin`, `gb_vat`, `nz_gst`, `au_abn`, `au_arn`, `in_gst`, `no_vat`, `no_voec`, `za_vat`, `ch_vat`, `mx_rfc`, `sg_uen`, `ru_inn`, `ru_kpp`, `ca_bn`, `hk_br`, `es_cif`, `tw_vat`, `th_vat`, `jp_cn`, `jp_rn`, `jp_trn`, `li_uid`, `li_vat`, `my_itn`, `us_ein`, `kr_brn`, `ca_qst`, `ca_gst_hst`, `ca_pst_bc`, `ca_pst_mb`, `ca_pst_sk`, `my_sst`, `sg_gst`, `ae_trn`, `cl_tin`, `sa_vat`, `id_npwp`, `my_frp`, `il_vat`, `ge_vat`, `ua_vat`, `is_vat`, `bg_uic`, `hu_tin`, `si_tin`, `ke_pin`, `tr_tin`, `eg_tin`, `ph_tin`, `al_tin`, `bh_vat`, `kz_bin`, `ng_tin`, `om_vat`, `de_stn`, `ch_uid`, `tz_vat`, `uz_vat`, `uz_tin`, `md_vat`, `ma_vat`, `by_tin`, `ao_tin`, `bs_tin`, `bb_tin`, `cd_nif`, `mr_nif`, `me_pib`, `zw_tin`, `ba_tin`, `gn_nif`, `mk_vat`, `sr_fin`, `sn_ninea`, `am_tin`, `np_pan`, `tj_tin`, `ug_tin`, `zm_tin`, `kh_tin`, or `unknown` - `value` string, nullable — The value of the tax ID. - `default_payment_method` union — ID of the default payment method for the invoice. It must belong to the customer associated with the invoice. If not set, defaults to the subscription's default payment method, if any, or to the default payment method in the customer's invoice settings. - string - PaymentMethod — PaymentMethod objects represent your customer's payment instruments. You can use them with [PaymentIntents](https://stripe.com/docs/payments/payment-intents) to collect payments or save them to Customer objects to store instrument details for future payments. Related guides: [Payment Methods](https://stripe.com/docs/payments/payment-methods) and [More Payment Scenarios](https://stripe.com/docs/payments/more-payment-scenarios). - `acss_debit` PaymentMethodAcssDebit - … - `affirm` PaymentMethodAffirm - `afterpay_clearpay` PaymentMethodAfterpayClearpay - `alipay` PaymentFlowsPrivatePaymentMethodsAlipay - `allow_redisplay` 'always' | 'limited' | 'unspecified' — This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”. - `alma` PaymentMethodAlma - `amazon_pay` PaymentMethodAmazonPay - `au_becs_debit` PaymentMethodAuBecsDebit - … - `bacs_debit` PaymentMethodBacsDebit - … - `bancontact` PaymentMethodBancontact - `billing_details` BillingDetails, required - … - `blik` PaymentMethodBlik - `boleto` PaymentMethodBoleto - … - `card` PaymentMethodCard - … - `card_present` PaymentMethodCardPresent - … - `cashapp` PaymentMethodCashapp - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `customer` union — The ID of the Customer to which this PaymentMethod is saved. This will not be set when the PaymentMethod has not been saved to a Customer. - … - `customer_balance` PaymentMethodCustomerBalance - `eps` PaymentMethodEps - … - `fpx` PaymentMethodFpx - … - `giropay` PaymentMethodGiropay - `grabpay` PaymentMethodGrabpay - `id` string, required — Unique identifier for the object. - `ideal` PaymentMethodIdeal - … - `interac_present` PaymentMethodInteracPresent - … - `kakao_pay` PaymentMethodKakaoPay - `klarna` PaymentMethodKlarna - … - `konbini` PaymentMethodKonbini - `kr_card` PaymentMethodKrCard - … - `link` PaymentMethodLink - … - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `mobilepay` PaymentMethodMobilepay - `multibanco` PaymentMethodMultibanco - `naver_pay` PaymentMethodNaverPay - … - `object` 'payment_method', required — String representing the object's type. Objects of the same type share the same value. - `oxxo` PaymentMethodOxxo - `p24` PaymentMethodP24 - … - `pay_by_bank` PaymentMethodPayByBank - `payco` PaymentMethodPayco - `paynow` PaymentMethodPaynow - `paypal` PaymentMethodPaypal - … - `pix` PaymentMethodPix - `promptpay` PaymentMethodPromptpay - `radar_options` RadarRadarOptions — Options to configure Radar. See [Radar Session](https://stripe.com/docs/radar/radar-session) for more information. - … - `revolut_pay` PaymentMethodRevolutPay - `samsung_pay` PaymentMethodSamsungPay - `sepa_debit` PaymentMethodSepaDebit - … - `sofort` PaymentMethodSofort - … - `swish` PaymentMethodSwish - `twint` PaymentMethodTwint - `type` 'acss_debit' | 'affirm' | 'afterpay_clearpay' | 'alipay' | 'alma' | 'amazon_pay' | 'au_becs_debit' | 'bacs_debit' | 'bancontact' | 'blik' | 'boleto' | 'card' | 'card_present' | 'cashapp' | 'customer_balance' | 'eps' | 'fpx' | 'giropay' | 'grabpay' | 'ideal' | 'interac_present' | 'kakao_pay' | 'klarna' | 'konbini' | 'kr_card' | 'link' | 'mobilepay' | 'multibanco' | 'naver_pay' | 'oxxo' | 'p24' | 'pay_by_bank' | 'payco' | 'paynow' | 'paypal' | 'pix' | 'promptpay' | 'revolut_pay' | 'samsung_pay' | 'sepa_debit' | 'sofort' | 'swish' | 'twint' | 'us_bank_account' | 'wechat_pay' | 'zip', required — The type of the PaymentMethod. An additional hash is included on the PaymentMethod with a name matching this value. It contains additional information specific to the PaymentMethod type. - `us_bank_account` PaymentMethodUsBankAccount - … - `wechat_pay` PaymentMethodWechatPay - `zip` PaymentMethodZip - `default_source` union — ID of the default payment source for the invoice. It must belong to the customer associated with the invoice and be in a chargeable state. If not set, defaults to the subscription's default source, if any, or to the customer's default source. - string - BankAccount — These bank accounts are payment methods on `Customer` objects. On the other hand [External Accounts](/api#external_accounts) are transfer destinations on `Account` objects for connected accounts. They can be bank accounts or debit cards as well, and are documented in the links above. Related guide: [Bank debits and transfers](/payments/bank-debits-transfers) - `account` union — The ID of the account that the bank account is associated with. - … - `account_holder_name` string, nullable — The name of the person or business that owns the bank account. - `account_holder_type` string, nullable — The type of entity that holds the account. This can be either `individual` or `company`. - `account_type` string, nullable — The bank account type. This can only be `checking` or `savings` in most countries. In Japan, this can only be `futsu` or `toza`. - `available_payout_methods` string[], nullable — A set of available payout methods for this bank account. Only values from this set should be passed as the `method` when creating a payout. - `bank_name` string, nullable — Name of the bank associated with the routing number (e.g., `WELLS FARGO`). - `country` string, required — Two-letter ISO code representing the country the bank account is located in. - `currency` string, currency, required — Three-letter [ISO code for the currency](https://stripe.com/docs/payouts) paid out to the bank account. - `customer` union — The ID of the customer that the bank account is associated with. - … - `default_for_currency` boolean, nullable — Whether this bank account is the default external account for its currency. - `fingerprint` string, nullable — Uniquely identifies this particular bank account. You can use this attribute to check whether two bank accounts are the same. - `future_requirements` ExternalAccountRequirements - … - `id` string, required — Unique identifier for the object. - `last4` string, required — The last four digits of the bank account number. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'bank_account', required — String representing the object's type. Objects of the same type share the same value. - `requirements` ExternalAccountRequirements - … - `routing_number` string, nullable — The routing transit number for the bank account. - `status` string, required — For bank accounts, possible values are `new`, `validated`, `verified`, `verification_failed`, or `errored`. A bank account that hasn't had any activity or validation performed is `new`. If Stripe can determine that the bank account exists, its status will be `validated`. Note that there often isn’t enough information to know (e.g., for smaller credit unions), and the validation is not always run. If customer bank account verification has succeeded, the bank account status will be `verified`. If the verification failed for any reason, such as microdeposit failure, the status will be `verification_failed`. If a payout sent to this bank account fails, we'll set the status to `errored` and will not continue to send [scheduled payouts](https://stripe.com/docs/payouts#payout-schedule) until the bank details are updated. For external accounts, possible values are `new`, `errored` and `verification_failed`. If a payout fails, the status is set to `errored` and scheduled payouts are stopped until account details are updated. In the US and India, if we can't [verify the owner of the bank account](https://support.stripe.com/questions/bank-account-ownership-verification), we'll set the status to `verification_failed`. Other validations aren't run against external accounts because they're only used for payouts. This means the other statuses don't apply. - Card — You can store multiple cards on a customer in order to charge the customer later. You can also store multiple debit cards on a recipient in order to transfer to those cards later. Related guide: [Card payments with Sources](https://stripe.com/docs/sources/cards) - `account` union — The account this card belongs to. This attribute will not be in the card object if the card belongs to a customer or recipient instead. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - … - `address_city` string, nullable — City/District/Suburb/Town/Village. - `address_country` string, nullable — Billing address country, if provided when creating card. - `address_line1` string, nullable — Address line 1 (Street address/PO Box/Company name). - `address_line1_check` string, nullable — If `address_line1` was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. - `address_line2` string, nullable — Address line 2 (Apartment/Suite/Unit/Building). - `address_state` string, nullable — State/County/Province/Region. - `address_zip` string, nullable — ZIP or postal code. - `address_zip_check` string, nullable — If `address_zip` was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. - `allow_redisplay` 'always' | 'limited' | 'unspecified', nullable — This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”. - `available_payout_methods` string[], nullable — A set of available payout methods for this card. Only values from this set should be passed as the `method` when creating a payout. - `brand` string, required — Card brand. Can be `American Express`, `Diners Club`, `Discover`, `Eftpos Australia`, `Girocard`, `JCB`, `MasterCard`, `UnionPay`, `Visa`, or `Unknown`. - `country` string, nullable — Two-letter ISO code representing the country of the card. You could use this attribute to get a sense of the international breakdown of cards you've collected. - `currency` string, currency, nullable — Three-letter [ISO code for currency](https://www.iso.org/iso-4217-currency-codes.html) in lowercase. Must be a [supported currency](https://docs.stripe.com/currencies). Only applicable on accounts (not customers or recipients). The card can be used as a transfer destination for funds in this currency. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `customer` union — The customer that this card belongs to. This attribute will not be in the card object if the card belongs to an account or recipient instead. - … - `cvc_check` string, nullable — If a CVC was provided, results of the check: `pass`, `fail`, `unavailable`, or `unchecked`. A result of unchecked indicates that CVC was provided but hasn't been checked yet. Checks are typically performed when attaching a card to a Customer object, or when creating a charge. For more details, see [Check if a card is valid without a charge](https://support.stripe.com/questions/check-if-a-card-is-valid-without-a-charge). - `default_for_currency` boolean, nullable — Whether this card is the default external account for its currency. This property is only available for accounts where [controller.requirement_collection](/api/accounts/object#account_object-controller-requirement_collection) is `application`, which includes Custom accounts. - `dynamic_last4` string, nullable — (For tokenized numbers only.) The last four digits of the device account number. - `exp_month` integer, required — Two-digit number representing the card's expiration month. - `exp_year` integer, required — Four-digit number representing the card's expiration year. - `fingerprint` string, nullable — Uniquely identifies this particular card number. You can use this attribute to check whether two customers who’ve signed up with you are using the same card number, for example. For payment methods that tokenize card information (Apple Pay, Google Pay), the tokenized number might be provided instead of the underlying card number. *As of May 1, 2021, card fingerprint in India for Connect changed to allow two fingerprints for the same card---one for India and one for the rest of the world.* - `funding` string, required — Card funding type. Can be `credit`, `debit`, `prepaid`, or `unknown`. - `id` string, required — Unique identifier for the object. - `iin` string — Issuer identification number of the card. - `last4` string, required — The last four digits of the card. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `name` string, nullable — Cardholder name. - `networks` TokenCardNetworks - … - `object` 'card', required — String representing the object's type. Objects of the same type share the same value. - `regulated_status` 'regulated' | 'unregulated', nullable — Status of a card based on the card issuer. - `status` string, nullable — For external accounts that are cards, possible values are `new` and `errored`. If a payout fails, the status is set to `errored` and [scheduled payouts](https://stripe.com/docs/payouts#payout-schedule) are stopped until account details are updated. - `tokenization_method` string, nullable — If the card number is tokenized, this is the method that was used. Can be `android_pay` (includes Google Pay), `apple_pay`, `masterpass`, `visa_checkout`, or null. - Source — `Source` objects allow you to accept a variety of payment methods. They represent a customer's payment instrument, and can be used with the Stripe API just like a `Card` object: once chargeable, they can be charged, or can be attached to customers. Stripe doesn't recommend using the deprecated [Sources API](https://stripe.com/docs/api/sources). We recommend that you adopt the [PaymentMethods API](https://stripe.com/docs/api/payment_methods). This newer API provides access to our latest features and payment method types. Related guides: [Sources API](https://stripe.com/docs/sources) and [Sources & Customers](https://stripe.com/docs/sources/customers). - `ach_credit_transfer` SourceTypeAchCreditTransfer - … - `ach_debit` SourceTypeAchDebit - … - `acss_debit` SourceTypeAcssDebit - … - `alipay` SourceTypeAlipay - … - `allow_redisplay` 'always' | 'limited' | 'unspecified', nullable — This field indicates whether this payment method can be shown again to its customer in a checkout flow. Stripe products such as Checkout and Elements use this field to determine whether a payment method can be shown as a saved payment method in a checkout flow. The field defaults to “unspecified”. - `amount` integer, nullable — A positive integer in the smallest currency unit (that is, 100 cents for $1.00, or 1 for ¥1, Japanese Yen being a zero-decimal currency) representing the total amount associated with the source. This is the amount for which the source will be chargeable once ready. Required for `single_use` sources. - `au_becs_debit` SourceTypeAuBecsDebit - … - `bancontact` SourceTypeBancontact - … - `card` SourceTypeCard - … - `card_present` SourceTypeCardPresent - … - `client_secret` string, required — The client secret of the source. Used for client-side retrieval using a publishable key. - `code_verification` SourceCodeVerificationFlow - … - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `currency` string, currency, nullable — Three-letter [ISO code for the currency](https://stripe.com/docs/currencies) associated with the source. This is the currency for which the source will be chargeable once ready. Required for `single_use` sources. - `customer` string — The ID of the customer to which this source is attached. This will not be present when the source has not been attached to a customer. - `eps` SourceTypeEps - … - `flow` string, required — The authentication `flow` of the source. `flow` is one of `redirect`, `receiver`, `code_verification`, `none`. - `giropay` SourceTypeGiropay - … - `id` string, required — Unique identifier for the object. - `ideal` SourceTypeIdeal - … - `klarna` SourceTypeKlarna - … - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `multibanco` SourceTypeMultibanco - … - `object` 'source', required — String representing the object's type. Objects of the same type share the same value. - `owner` SourceOwner - … - `p24` SourceTypeP24 - … - `receiver` SourceReceiverFlow - … - `redirect` SourceRedirectFlow - … - `sepa_debit` SourceTypeSepaDebit - … - `sofort` SourceTypeSofort - … - `source_order` SourceOrder - … - `statement_descriptor` string, nullable — Extra information about a source. This will appear on your customer's statement every time you charge the source. - `status` string, required — The status of the source, one of `canceled`, `chargeable`, `consumed`, `failed`, or `pending`. Only `chargeable` sources can be used to create a charge. - `three_d_secure` SourceTypeThreeDSecure - … - `type` 'ach_credit_transfer' | 'ach_debit' | 'acss_debit' | 'alipay' | 'au_becs_debit' | 'bancontact' | 'card' | 'card_present' | 'eps' | 'giropay' | 'ideal' | 'klarna' | 'multibanco' | 'p24' | 'sepa_debit' | 'sofort' | 'three_d_secure' | 'wechat', required — The `type` of the source. The `type` is a payment method, one of `ach_credit_transfer`, `ach_debit`, `alipay`, `bancontact`, `card`, `card_present`, `eps`, `giropay`, `ideal`, `multibanco`, `klarna`, `p24`, `sepa_debit`, `sofort`, `three_d_secure`, or `wechat`. An additional hash is included on the source with a name matching this value. It contains additional information specific to the [payment method](https://stripe.com/docs/sources) used. - `usage` string, nullable — Either `reusable` or `single_use`. Whether this source should be reusable or not. Some source types may or may not be reusable by construction, while others may leave the option at creation. If an incompatible value is passed, an error will be returned. - `wechat` SourceTypeWechat - … - `default_tax_rates` TaxRate[], required — The tax rates applied to this invoice, if any. - `active` boolean, required — Defaults to `true`. When set to `false`, this tax rate cannot be used with new applications or Checkout Sessions, but will still work for subscriptions and invoices that already have it set. - `country` string, nullable — Two-letter country code ([ISO 3166-1 alpha-2](https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2)). - `created` integer, required — Time at which the object was created. Measured in seconds since the Unix epoch. - `description` string, nullable — An arbitrary string attached to the tax rate for your internal use only. It will not be visible to your customers. - `display_name` string, required — The display name of the tax rates as it will appear to your customer on their receipt email, PDF, and the hosted invoice page. - `effective_percentage` number, nullable — Actual/effective tax rate percentage out of 100. For tax calculations with automatic_tax[enabled]=true, this percentage reflects the rate actually used to calculate tax based on the product's taxability and whether the user is registered to collect taxes in the corresponding jurisdiction. - `flat_amount` TaxRateFlatAmount — The amount of the tax rate when the `rate_type`` is `flat_amount`. Tax rates with `rate_type` `percentage` can vary based on the transaction, resulting in this field being `null`. This field exposes the amount and currency of the flat tax rate. - `amount` integer, required — Amount of the tax when the `rate_type` is `flat_amount`. This positive integer represents how much to charge in the smallest currency unit (e.g., 100 cents to charge $1.00 or 100 to charge ¥100, a zero-decimal currency). The amount value supports up to eight digits (e.g., a value of 99999999 for a USD charge of $999,999.99). - `currency` string, required — Three-letter ISO currency code, in lowercase. - `id` string, required — Unique identifier for the object. - `inclusive` boolean, required — This specifies if the tax rate is inclusive or exclusive. - `jurisdiction` string, nullable — The jurisdiction for the tax rate. You can use this label field for tax reporting purposes. It also appears on your customer’s invoice. - `jurisdiction_level` 'city' | 'country' | 'county' | 'district' | 'multiple' | 'state', nullable — The level of the jurisdiction that imposes this tax rate. Will be `null` for manually defined tax rates. - `livemode` boolean, required — Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode. - `metadata` object, nullable — Set of [key-value pairs](https://stripe.com/docs/api/metadata) that you can attach to an object. This can be useful for storing additional information about the object in a structured format. - `object` 'tax_rate', required — String representing the object's type. Objects of the same type share the same value. - `percentage` number, required — Tax rate percentage out of 100. For tax calculations with automatic_tax[enabled]=true, this percentage includes the statutory tax rate of non-taxable jurisdictions. - `rate_type` 'flat_amount' | 'percentage', nullable — Indicates the type of tax rate applied to the taxable amount. This value can be `null` when no tax applies to the location. - `state` string, nullable — [ISO 3166-2 subdivision code](https://en.wikipedia.org/wiki/ISO_3166-2:US), without country prefix. For example, "NY" for New York, United States. - `tax_type` 'amusement_tax' | 'communications_tax' | 'gst' | 'hst' | 'igst' | 'jct' | 'lease_tax' | 'pst' | 'qst' | 'retail_delivery_fee' | 'rst' | 'sales_tax' | 'service_tax' | 'vat', nullable — The high-level tax type, such as `vat` or `sales_tax`. - `description` string, nullable — An arbitrary string attached to the object. Often useful for displaying to users. Referenced as 'memo' in the Dashboard. - `discount` Discount — A discount represents the actual application of a [coupon](https://stripe.com/docs/api#coupons) or [promotion code](https://stripe.com/docs/api#promotion_codes). It contains information about when the discount began, when it will end, and what it is applied to. Related guide: [Applying discounts to subscriptions](https://stripe.com/docs/billing/subscriptions/discounts) - `checkout_session` string, nullable — The Checkout session that this coupon is applied to, if it is applied to a particular session in payment mode. Will not be present for subscription mode. - `coupon` Coupon, required — A coupon contains information about a percent-off or amount-off discount you might want to apply to a customer. Coupons may be applied to [subscriptions](https://stripe.com/docs/api#subscriptions), [invoices](https://stripe.com/docs/api#invoices), [checkout sessions](https://stripe.com/docs/api/checkout/sessions), [quotes](https://stripe.com/docs/api#quotes), and more. Coupons do not work with conventional one-off [charges](https://stripe.com/docs/api#create_charge) or [payment intents](https://stripe.com/docs/api/payment_intents). - `amount_off` integer, nullable — Amount (in the `currency` specified) that will be taken off the subtotal of any invoices for this customer. - `applies_to` CouponAppliesTo - … - … truncated; see the full OpenAPI document linked below ## Other responses - `default` — Error response. ## Changes > 9 revisions in range; 2 not diffed. - **2025-01-17** `b8a91ebdacb7` — 8 info - added the optional property `error/advice_code` to the response with the `default` status - added the optional property `error/payment_intent/invoice/anyOf[subschema #2: Invoice]/charge/anyOf[subschema #2: Charge]/outcome/anyOf[subschema #1: ChargeOutcome]/advice_code` to the response with the `default` status - added the optional property `error/payment_intent/invoice/anyOf[subschema #2: Invoice]/charge/anyOf[subschema #2: Charge]/payment_method_details/anyOf[subschema #1: payment_method_details]/pay_by_bank` to the response with the `default` status - added the optional property `error/payment_intent/invoice/anyOf[subschema #2: Invoice]/charge/anyOf[subschema #2: Charge]/payment_method_details/anyOf[subschema #1: payment_method_details]/paypal/country` to the response with the `default` status - …4 more - …earlier changes not shown [Full history](https://skmtc.dev/stripe/apis/spec3/changes/v1/subscriptions/get.md) --- [API](https://skmtc.dev/stripe/apis/spec3.md) · [All operations](https://skmtc.dev/stripe/apis/spec3/llms.txt) · [OpenAPI document](https://skmtc-service-production.skmtc.workers.dev/v1/apis/stripe/spec3/revisions/b8a91ebdacb7/schema)