---
title: "Get Guy Wires And Foundations"
method: GET
path: "/v1/structures/{structure_id}/guy-wires-and-foundations"
tags: ["structures"]
---

# Get Guy Wires And Foundations

`GET /v1/structures/{structure_id}/guy-wires-and-foundations`

## Request

- Base URL: `https://api.shapemaker.io` (the document declares no server; this is the origin it was published from)
- URL: `https://api.shapemaker.io/v1/structures/{structure_id}/guy-wires-and-foundations`
- Auth: OAuth 2
  - Password
  - Token URL: `/v1/auth`

This endpoint retrieves the guy wire details associated with a structure by its ID.
The structure ID should be provided as a path parameter in the URL.

## Path parameters

- `structure_id` string, required

## Response `200`

Successful Response

- GuyWireAndFoundationView[]
  - `id` integer, nullable
  - `wires` GuyWireView[], required
    - `id` integer, nullable
    - `crossSection` 'ROPE_1x7_D10' | 'ROPE_1x7_D11' | 'ROPE_1x7_D13' | 'ROPE_1x37_D25' | 'SWR_1x7_D9' | 'SWR_1x7_D11.4' | 'SWR_1x19_D9.2' | 'SWR_1x19_D11.6' | 'SWR_1x37_D9.2' | 'SWR_1x37_D11.6' | 'SWR_6x7_D11.1' | 'SWR_6x7_D14' | 'SS_1x3_D5.6' | 'SS_1x3_D9.9' | 'SS_1x7_D5.1' | 'SS_1x7_D6.4' | 'SS_1x7_D7.3' | 'SS_1x7_D9.2' | 'SS_1x7_D10.6' | 'SS_1x7_D12.1' | 'SS_1x7_D13.1' | 'SS_1x19_D15.4' | 'SS_1x19_D17.6' | 'SS_1x19_D20.1' | 'SS_1x19_D21.8' | 'SS_1x37_D21.0' | 'NS_1x7_D5.4' | 'NS_1x7_D6.9' | 'NS_1x7_D7.7' | 'NS_1x12_D7.5' | 'NS_1x12_D9.5' | 'NS_1x19_D9.0' | 'NS_1x19_D10.8' | 'NS_1x19_D11.5' | 'NS_1x19_D12.8' | 'NS_1x19_D15.0' | 'NS_1x37_D17.9' | 'NS_1x37_D21.0' | 'BS_1x7_D9.8' | 'BS_1x7_D12' | 'BS_1x7_D14.3' | 'NS_1x37_D21.21' | 'NS_1x19_D16.0' | 'NS_1x19_D14.0' | 'NS_1x7_D12.7' | 'BS_6x19_D16.0' | 'BS_6x19_D12.0', required
    - `materialId` string, required
    - `elevationFromStructureBase` number, required
    - `initialTension` number, required
    - `terminationType` 'metal_filled_socket' | 'resin_filled_socket' | 'ferrule_secured_eye' | 'swaged_socket' | 'u_bolt_grip': Guy wire termination (end assembly) classes from EN 1993-1-11 Tab. 6.3. Stored per guy wire; None means the factor that was hardcoded before the termination became an input is assumed (see the defaults below).
    - `azimuthOffsetDeg` number, required
    - `radialOffsetM` number, required
    - `elevationOffsetM` number, required
  - `foundation` GuyFoundationView, required
    - `id` integer, nullable
    - `distanceFromCenter` number, required
    - `elevation` number, required
    - `azimuth` number, required
    - `guyFoundationSoil` GuyFoundationSoilView, required
      - `footingDepth` number, required
      - `waterLevel` number, required
      - `isDrained` boolean, required
      - `soilProperties` GuyFoundationSoilPropertiesView, required
        - `angleOfFriction` number, required
        - `cohesion` number, required
        - `soilDensity` number, required
        - `characteristic_undrained_shear_strength` number, nullable
      - `backfillSoilProperties` GuyFoundationSoilPropertiesView, required
        - `angleOfFriction` number, required
        - `cohesion` number, required
        - `soilDensity` number, required
        - `characteristic_undrained_shear_strength` number, nullable
    - `foundationBlock` GuyFoundationBlockView, required
      - `width` number, required
      - `height` number, required
      - `breadth` number, required

## Other responses

- `404`: Structure not found
- `422`: Validation Error

---

[API](https://skmtc.dev/shapemaker/apis/shapemaker-api.md) - [All operations](https://skmtc.dev/shapemaker/apis/shapemaker-api/llms.txt) - [OpenAPI document](https://skmtc.dev/shapemaker/apis/shapemaker-api/revisions/b8461cf1236c?raw)