--- title: "POST /v4/spreadsheets/{spreadsheetId}:batchUpdate" method: POST path: "/v4/spreadsheets/{spreadsheetId}:batchUpdate" tags: ["spreadsheets"] --- # POST /v4/spreadsheets/{spreadsheetId}:batchUpdate `POST /v4/spreadsheets/{spreadsheetId}:batchUpdate` Applies one or more updates to the spreadsheet. Each request is validated before being applied. If any request is not valid then the entire request will fail and nothing will be applied. Some requests have replies to give you some information about how they are applied. The replies will mirror the requests. For example, if you applied 4 updates and the 3rd one had a reply, then the response will have 2 empty replies, the actual reply, and another empty reply, in that order. Due to the collaborative nature of spreadsheets, it is not guaranteed that the spreadsheet will reflect exactly your changes after this completes, however it is guaranteed that the updates in the request will be applied together atomically. Your changes may be altered with respect to collaborator changes. If there are no collaborators, the spreadsheet should reflect your changes. ## Path parameters - `spreadsheetId` string, required ## Request body - BatchUpdateSpreadsheetRequest — The request for updating any aspect of a spreadsheet. - `responseRanges` string[] — Limits the ranges included in the response spreadsheet. Meaningful only if include_spreadsheet_in_response is 'true'. - `responseIncludeGridData` boolean — True if grid data should be returned. Meaningful only if include_spreadsheet_in_response is 'true'. This parameter is ignored if a field mask was set in the request. - `requests` Request[] — A list of updates to apply to the spreadsheet. Requests will be applied in the order they are specified. If any request is not valid, no requests will be applied. - `updateDimensionProperties` UpdateDimensionPropertiesRequest — Updates properties of dimensions within the specified range. - `dataSourceSheetRange` DataSourceSheetDimensionRange — A range along a single dimension on a DATA_SOURCE sheet. - `sheetId` integer — The ID of the data source sheet the range is on. - `columnReferences` DataSourceColumnReference[] — The columns on the data source sheet. - `name` string — The display name of the column. It should be unique within a data source. - `range` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - `sheetId` integer — The sheet this span is on. - `startIndex` integer — The start (inclusive) of the span, or not set if unbounded. - `dimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension of the span. - `endIndex` integer — The end (exclusive) of the span, or not set if unbounded. - `properties` DimensionProperties — Properties about a dimension. - `hiddenByUser` boolean — True if this dimension is explicitly hidden. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - `name` string — The display name of the column. It should be unique within a data source. - `developerMetadata` DeveloperMetadata[] — The developer metadata associated with a single row or column. - `metadataKey` string — The metadata key. There may be multiple metadata in a spreadsheet with the same key. Developer metadata must always have a key specified. - `metadataValue` string — Data associated with the metadata's key. - `location` DeveloperMetadataLocation — A location where metadata may be associated in a spreadsheet. - `sheetId` integer — The ID of the sheet when metadata is associated with an entire sheet. - `spreadsheet` boolean — True when metadata is associated with an entire spreadsheet. - `dimensionRange` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - … - `locationType` 'DEVELOPER_METADATA_LOCATION_TYPE_UNSPECIFIED' | 'ROW' | 'COLUMN' | 'SHEET' | 'SPREADSHEET' — The type of location this object represents. This field is read-only. - `visibility` 'DEVELOPER_METADATA_VISIBILITY_UNSPECIFIED' | 'DOCUMENT' | 'PROJECT' — The metadata visibility. Developer metadata must always have visibility specified. - `metadataId` integer — The spreadsheet-scoped unique ID that identifies the metadata. IDs may be specified when metadata is created, otherwise one will be randomly generated and assigned. Must be positive. - `pixelSize` integer — The height (if a row) or width (if a column) of the dimension in pixels. - `hiddenByFilter` boolean — True if this dimension is being filtered. This field is read-only. - `fields` string, google-fieldmask — The fields that should be updated. At least one field must be specified. The root `properties` is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `updateEmbeddedObjectPosition` UpdateEmbeddedObjectPositionRequest — Update an embedded object's position (such as a moving or resizing a chart or image). - `newPosition` EmbeddedObjectPosition — The position of an embedded object such as a chart. - `overlayPosition` OverlayPosition — The location an object is overlaid on top of a grid. - `widthPixels` integer — The width of the object, in pixels. Defaults to 600. - `offsetYPixels` integer — The vertical offset, in pixels, that the object is offset from the anchor cell. - `anchorCell` GridCoordinate — A coordinate in a sheet. All indexes are zero-based. - `sheetId` integer — The sheet this coordinate is on. - `rowIndex` integer — The row index of the coordinate. - `columnIndex` integer — The column index of the coordinate. - `offsetXPixels` integer — The horizontal offset, in pixels, that the object is offset from the anchor cell. - `heightPixels` integer — The height of the object, in pixels. Defaults to 371. - `newSheet` boolean — If true, the embedded object is put on a new sheet whose ID is chosen for you. Used only when writing. - `sheetId` integer — The sheet this is on. Set only if the embedded object is on its own sheet. Must be non-negative. - `objectId` integer — The ID of the object to moved. - `fields` string, google-fieldmask — The fields of OverlayPosition that should be updated when setting a new position. Used only if newPosition.overlayPosition is set, in which case at least one field must be specified. The root `newPosition.overlayPosition` is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `deleteDimension` DeleteDimensionRequest — Deletes the dimensions from the sheet. - `range` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - `sheetId` integer — The sheet this span is on. - `startIndex` integer — The start (inclusive) of the span, or not set if unbounded. - `dimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension of the span. - `endIndex` integer — The end (exclusive) of the span, or not set if unbounded. - `updateNamedRange` UpdateNamedRangeRequest — Updates properties of the named range with the specified namedRangeId. - `fields` string, google-fieldmask — The fields that should be updated. At least one field must be specified. The root `namedRange` is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `namedRange` NamedRange — A named range. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `namedRangeId` string — The ID of the named range. - `name` string — The name of the named range. - `updateDimensionGroup` UpdateDimensionGroupRequest — Updates the state of the specified group. - `dimensionGroup` DimensionGroup — A group over an interval of rows or columns on a sheet, which can contain or be contained within other groups. A group can be collapsed or expanded as a unit on the sheet. - `range` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - `sheetId` integer — The sheet this span is on. - `startIndex` integer — The start (inclusive) of the span, or not set if unbounded. - `dimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension of the span. - `endIndex` integer — The end (exclusive) of the span, or not set if unbounded. - `depth` integer — The depth of the group, representing how many groups have a range that wholly contains the range of this group. - `collapsed` boolean — This field is true if this group is collapsed. A collapsed group remains collapsed if an overlapping group at a shallower depth is expanded. A true value does not imply that all dimensions within the group are hidden, since a dimension's visibility can change independently from this group property. However, when this property is updated, all dimensions within it are set to hidden if this field is true, or set to visible if this field is false. - `fields` string, google-fieldmask — The fields that should be updated. At least one field must be specified. The root `dimensionGroup` is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `insertRange` InsertRangeRequest — Inserts cells into a range, shifting the existing cells over or down. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `shiftDimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension which will be shifted when inserting cells. If ROWS, existing cells will be shifted down. If COLUMNS, existing cells will be shifted right. - `deleteFilterView` DeleteFilterViewRequest — Deletes a particular filter view. - `filterId` integer — The ID of the filter to delete. - `duplicateFilterView` DuplicateFilterViewRequest — Duplicates a particular filter view. - `filterId` integer — The ID of the filter being duplicated. - `insertDimension` InsertDimensionRequest — Inserts rows or columns in a sheet at a particular index. - `range` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - `sheetId` integer — The sheet this span is on. - `startIndex` integer — The start (inclusive) of the span, or not set if unbounded. - `dimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension of the span. - `endIndex` integer — The end (exclusive) of the span, or not set if unbounded. - `inheritFromBefore` boolean — Whether dimension properties should be extended from the dimensions before or after the newly inserted dimensions. True to inherit from the dimensions before (in which case the start index must be greater than 0), and false to inherit from the dimensions after. For example, if row index 0 has red background and row index 1 has a green background, then inserting 2 rows at index 1 can inherit either the green or red background. If `inheritFromBefore` is true, the two new rows will be red (because the row before the insertion point was red), whereas if `inheritFromBefore` is false, the two new rows will be green (because the row after the insertion point was green). - `addSlicer` AddSlicerRequest — Adds a slicer to a sheet in the spreadsheet. - `slicer` Slicer — A slicer in a sheet. - `position` EmbeddedObjectPosition — The position of an embedded object such as a chart. - `overlayPosition` OverlayPosition — The location an object is overlaid on top of a grid. - `widthPixels` integer — The width of the object, in pixels. Defaults to 600. - `offsetYPixels` integer — The vertical offset, in pixels, that the object is offset from the anchor cell. - `anchorCell` GridCoordinate — A coordinate in a sheet. All indexes are zero-based. - … - `offsetXPixels` integer — The horizontal offset, in pixels, that the object is offset from the anchor cell. - `heightPixels` integer — The height of the object, in pixels. Defaults to 371. - `newSheet` boolean — If true, the embedded object is put on a new sheet whose ID is chosen for you. Used only when writing. - `sheetId` integer — The sheet this is on. Set only if the embedded object is on its own sheet. Must be non-negative. - `slicerId` integer — The ID of the slicer. - `spec` SlicerSpec — The specifications of a slicer. - `title` string — The title of the slicer. - `horizontalAlignment` 'HORIZONTAL_ALIGN_UNSPECIFIED' | 'LEFT' | 'CENTER' | 'RIGHT' — The horizontal alignment of title in the slicer. If unspecified, defaults to `LEFT` - `backgroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `columnIndex` integer — The zero-based column index in the data table on which the filter is applied to. - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `filterCriteria` FilterCriteria — Criteria for showing or hiding rows in a filter or filter view. - `visibleBackgroundColorStyle` ColorStyle — A color value. - … - `visibleBackgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `visibleForegroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `hiddenValues` string[] — Values that should be hidden. - `visibleForegroundColorStyle` ColorStyle — A color value. - … - `condition` BooleanCondition — A condition that can evaluate to true or false. BooleanConditions are used by conditional formatting, data validation, and the criteria in filters. - … - `dataRange` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `applyToPivotTables` boolean — True if the filter should apply to pivot tables. If not set, default to `True`. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - `bold` boolean — True if the text is bold. - `fontFamily` string — The font family. - `italic` boolean — True if the text is italicized. - `fontSize` integer — The size of the font. - `foregroundColorStyle` ColorStyle — A color value. - … - `strikethrough` boolean — True if the text has a strikethrough. - `underline` boolean — True if the text is underlined. - `link` Link — An external or local reference. - … - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `refreshDataSource` RefreshDataSourceRequest — Refreshes one or multiple data source objects in the spreadsheet by the specified references. The request requires an additional `bigquery.readonly` OAuth scope if you are refreshing a BigQuery data source. If there are multiple refresh requests referencing the same data source objects in one batch, only the last refresh request is processed, and all those requests will have the same response accordingly. - `references` DataSourceObjectReferences — A list of references to data source objects. - `references` DataSourceObjectReference[] — The references. - `chartId` integer — References to a data source chart. - `sheetId` string — References to a DATA_SOURCE sheet. - `dataSourcePivotTableAnchorCell` GridCoordinate — A coordinate in a sheet. All indexes are zero-based. - `sheetId` integer — The sheet this coordinate is on. - `rowIndex` integer — The row index of the coordinate. - `columnIndex` integer — The column index of the coordinate. - `dataSourceTableAnchorCell` GridCoordinate — A coordinate in a sheet. All indexes are zero-based. - `sheetId` integer — The sheet this coordinate is on. - `rowIndex` integer — The row index of the coordinate. - `columnIndex` integer — The column index of the coordinate. - `dataSourceFormulaCell` GridCoordinate — A coordinate in a sheet. All indexes are zero-based. - `sheetId` integer — The sheet this coordinate is on. - `rowIndex` integer — The row index of the coordinate. - `columnIndex` integer — The column index of the coordinate. - `dataSourceId` string — Reference to a DataSource. If specified, refreshes all associated data source objects for the data source. - `force` boolean — Refreshes the data source objects regardless of the current state. If not set and a referenced data source object was in error state, the refresh will fail immediately. - `isAll` boolean — Refreshes all existing data source objects in the spreadsheet. - `unmergeCells` UnmergeCellsRequest — Unmerges cells in the given range. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `duplicateSheet` DuplicateSheetRequest — Duplicates the contents of a sheet. - `newSheetId` integer — If set, the ID of the new sheet. If not set, an ID is chosen. If set, the ID must not conflict with any existing sheet ID. If set, it must be non-negative. - `newSheetName` string — The name of the new sheet. If empty, a new name is chosen for you. - `sourceSheetId` integer — The sheet to duplicate. If the source sheet is of DATA_SOURCE type, its backing DataSource is also duplicated and associated with the new copy of the sheet. No data execution is triggered, the grid data of this sheet is also copied over but only available after the batch request completes. - `insertSheetIndex` integer — The zero-based index where the new sheet should be inserted. The index of all sheets after this are incremented. - `repeatCell` RepeatCellRequest — Updates all cells in the range to the values in the given Cell object. Only the fields listed in the fields field are updated; others are unchanged. If writing a cell with a formula, the formula's ranges will automatically increment for each field in the range. For example, if writing a cell with formula `=A1` into range B2:C4, B2 would be `=A1`, B3 would be `=A2`, B4 would be `=A3`, C2 would be `=B1`, C3 would be `=B2`, C4 would be `=B3`. To keep the formula's ranges static, use the `$` indicator. For example, use the formula `=$A$1` to prevent both the row and the column from incrementing. - `cell` CellData — Data about a specific cell. - `dataSourceTable` DataSourceTable — A data source table, which allows the user to import a static table of data from the DataSource into Sheets. This is also known as "Extract" in the Sheets editor. - `sortSpecs` SortSpec[] — Sort specifications in the data source table. The result of the data source table is sorted based on the sort specifications in order. - `backgroundColorStyle` ColorStyle — A color value. - … - `dimensionIndex` integer — The dimension the sort should be applied to. - `foregroundColorStyle` ColorStyle — A color value. - … - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `sortOrder` 'SORT_ORDER_UNSPECIFIED' | 'ASCENDING' | 'DESCENDING' — The order data should be sorted. - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `dataExecutionStatus` DataExecutionStatus — The data execution status. A data execution is created to sync a data source object with the latest data from a DataSource. It is usually scheduled to run at background, you can check its state to tell if an execution completes There are several scenarios where a data execution is triggered to run: * Adding a data source creates an associated data source sheet as well as a data execution to sync the data from the data source to the sheet. * Updating a data source creates a data execution to refresh the associated data source sheet similarly. * You can send refresh request to explicitly refresh one or multiple data source objects. - `errorCode` 'DATA_EXECUTION_ERROR_CODE_UNSPECIFIED' | 'TIMED_OUT' | 'TOO_MANY_ROWS' | 'TOO_MANY_COLUMNS' | 'TOO_MANY_CELLS' | 'ENGINE' | 'PARAMETER_INVALID' | 'UNSUPPORTED_DATA_TYPE' | 'DUPLICATE_COLUMN_NAMES' | 'INTERRUPTED' | 'CONCURRENT_QUERY' | 'OTHER' | 'TOO_MANY_CHARS_PER_CELL' | 'DATA_NOT_FOUND' | 'PERMISSION_DENIED' | 'MISSING_COLUMN_ALIAS' | 'OBJECT_NOT_FOUND' | 'OBJECT_IN_ERROR_STATE' | 'OBJECT_SPEC_INVALID' | 'DATA_EXECUTION_CANCELLED' — The error code. - `errorMessage` string — The error message, which may be empty. - `state` 'DATA_EXECUTION_STATE_UNSPECIFIED' | 'NOT_STARTED' | 'RUNNING' | 'CANCELLING' | 'SUCCEEDED' | 'FAILED' — The state of the data execution. - `lastRefreshTime` string, google-datetime — Gets the time the data last successfully refreshed. - `columns` DataSourceColumnReference[] — Columns selected for the data source table. The column_selection_type must be SELECTED. - `name` string — The display name of the column. It should be unique within a data source. - `rowLimit` integer — The limit of rows to return. If not set, a default limit is applied. Please refer to the Sheets editor for the default and max limit. - `dataSourceId` string — The ID of the data source the data source table is associated with. - `columnSelectionType` 'DATA_SOURCE_TABLE_COLUMN_SELECTION_TYPE_UNSPECIFIED' | 'SELECTED' | 'SYNC_ALL' — The type to select columns for the data source table. Defaults to SELECTED. - `filterSpecs` FilterSpec[] — Filter specifications in the data source table. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `filterCriteria` FilterCriteria — Criteria for showing or hiding rows in a filter or filter view. - … - `columnIndex` integer — The zero-based column index. - `pivotTable` PivotTable — A pivot table. - `valueLayout` 'HORIZONTAL' | 'VERTICAL' — Whether values should be listed horizontally (as columns) or vertically (as rows). - `filterSpecs` PivotFilterSpec[] — The filters applied to the source columns before aggregating data for the pivot table. Both criteria and filter_specs are populated in responses. If both fields are specified in an update request, this field takes precedence. - `columnOffsetIndex` integer — The zero-based column offset of the source range. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `filterCriteria` PivotFilterCriteria — Criteria for showing/hiding rows in a pivot table. - … - `columns` PivotGroup[] — Each column grouping in the pivot table. - `valueBucket` PivotGroupSortValueBucket — Information about which values in a pivot group should be used for sorting. - … - `repeatHeadings` boolean — True if the headings in this pivot group should be repeated. This is only valid for row groupings and is ignored by columns. By default, we minimize repetition of headings by not showing higher level headings where they are the same. For example, even though the third row below corresponds to "Q1 Mar", "Q1" is not shown because it is redundant with previous rows. Setting repeat_headings to true would cause "Q1" to be repeated for "Feb" and "Mar". +--------------+ | Q1 | Jan | | | Feb | | | Mar | +--------+-----+ | Q1 Total | +--------------+ - `sortOrder` 'SORT_ORDER_UNSPECIFIED' | 'ASCENDING' | 'DESCENDING' — The order the values in this group should be sorted. - `sourceColumnOffset` integer — The column offset of the source range that this grouping is based on. For example, if the source was `C10:E15`, a `sourceColumnOffset` of `0` means this group refers to column `C`, whereas the offset `1` would refer to column `D`. - `groupLimit` PivotGroupLimit — The count limit on rows or columns in the pivot group. - … - `label` string — The labels to use for the row/column groups which can be customized. For example, in the following pivot table, the row label is `Region` (which could be renamed to `State`) and the column label is `Product` (which could be renamed `Item`). Pivot tables created before December 2017 do not have header labels. If you'd like to add header labels to an existing pivot table, please delete the existing pivot table and then create a new pivot table with same parameters. +--------------+---------+-------+ | SUM of Units | Product | | | Region | Pen | Paper | +--------------+---------+-------+ | New York | 345 | 98 | | Oregon | 234 | 123 | | Tennessee | 531 | 415 | +--------------+---------+-------+ | Grand Total | 1110 | 636 | +--------------+---------+-------+ - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `valueMetadata` PivotGroupValueMetadata[] — Metadata about values in the grouping. - … - `showTotals` boolean — True if the pivot table should include the totals for this grouping. - `groupRule` PivotGroupRule — An optional setting on a PivotGroup that defines buckets for the values in the source data column rather than breaking out each individual value. Only one PivotGroup with a group rule may be added for each column in the source data, though on any given column you may add both a PivotGroup that has a rule and a PivotGroup that does not. - … - `dataSourceId` string — The ID of the data source the pivot table is reading data from. - `criteria` object — An optional mapping of filters per source column offset. The filters are applied before aggregating data into the pivot table. The map's key is the column offset of the source range that you want to filter, and the value is the criteria for that column. For example, if the source was `C10:E15`, a key of `0` will have the filter for column `C`, whereas the key `1` is for column `D`. This field is deprecated in favor of filter_specs. - `values` PivotValue[] — A list of values to include in the pivot table. - `sourceColumnOffset` integer — The column offset of the source range that this value reads from. For example, if the source was `C10:E15`, a `sourceColumnOffset` of `0` means this value refers to column `C`, whereas the offset `1` would refer to column `D`. - `formula` string — A custom formula to calculate the value. The formula must start with an `=` character. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `calculatedDisplayType` 'PIVOT_VALUE_CALCULATED_DISPLAY_TYPE_UNSPECIFIED' | 'PERCENT_OF_ROW_TOTAL' | 'PERCENT_OF_COLUMN_TOTAL' | 'PERCENT_OF_GRAND_TOTAL' — If specified, indicates that pivot values should be displayed as the result of a calculation with another pivot value. For example, if calculated_display_type is specified as PERCENT_OF_GRAND_TOTAL, all the pivot values are displayed as the percentage of the grand total. In the Sheets editor, this is referred to as "Show As" in the value section of a pivot table. - `name` string — A name to use for the value. - `summarizeFunction` 'PIVOT_STANDARD_VALUE_FUNCTION_UNSPECIFIED' | 'SUM' | 'COUNTA' | 'COUNT' | 'COUNTUNIQUE' | 'AVERAGE' | 'MAX' | 'MIN' | 'MEDIAN' | 'PRODUCT' | 'STDEV' | 'STDEVP' | 'VAR' | 'VARP' | 'CUSTOM' | 'NONE' — A function to summarize the value. If formula is set, the only supported values are SUM and CUSTOM. If sourceColumnOffset is set, then `CUSTOM` is not supported. - `source` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `rows` PivotGroup[] — Each row grouping in the pivot table. - `valueBucket` PivotGroupSortValueBucket — Information about which values in a pivot group should be used for sorting. - … - `repeatHeadings` boolean — True if the headings in this pivot group should be repeated. This is only valid for row groupings and is ignored by columns. By default, we minimize repetition of headings by not showing higher level headings where they are the same. For example, even though the third row below corresponds to "Q1 Mar", "Q1" is not shown because it is redundant with previous rows. Setting repeat_headings to true would cause "Q1" to be repeated for "Feb" and "Mar". +--------------+ | Q1 | Jan | | | Feb | | | Mar | +--------+-----+ | Q1 Total | +--------------+ - `sortOrder` 'SORT_ORDER_UNSPECIFIED' | 'ASCENDING' | 'DESCENDING' — The order the values in this group should be sorted. - `sourceColumnOffset` integer — The column offset of the source range that this grouping is based on. For example, if the source was `C10:E15`, a `sourceColumnOffset` of `0` means this group refers to column `C`, whereas the offset `1` would refer to column `D`. - `groupLimit` PivotGroupLimit — The count limit on rows or columns in the pivot group. - … - `label` string — The labels to use for the row/column groups which can be customized. For example, in the following pivot table, the row label is `Region` (which could be renamed to `State`) and the column label is `Product` (which could be renamed `Item`). Pivot tables created before December 2017 do not have header labels. If you'd like to add header labels to an existing pivot table, please delete the existing pivot table and then create a new pivot table with same parameters. +--------------+---------+-------+ | SUM of Units | Product | | | Region | Pen | Paper | +--------------+---------+-------+ | New York | 345 | 98 | | Oregon | 234 | 123 | | Tennessee | 531 | 415 | +--------------+---------+-------+ | Grand Total | 1110 | 636 | +--------------+---------+-------+ - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `valueMetadata` PivotGroupValueMetadata[] — Metadata about values in the grouping. - … - `showTotals` boolean — True if the pivot table should include the totals for this grouping. - `groupRule` PivotGroupRule — An optional setting on a PivotGroup that defines buckets for the values in the source data column rather than breaking out each individual value. Only one PivotGroup with a group rule may be added for each column in the source data, though on any given column you may add both a PivotGroup that has a rule and a PivotGroup that does not. - … - `dataExecutionStatus` DataExecutionStatus — The data execution status. A data execution is created to sync a data source object with the latest data from a DataSource. It is usually scheduled to run at background, you can check its state to tell if an execution completes There are several scenarios where a data execution is triggered to run: * Adding a data source creates an associated data source sheet as well as a data execution to sync the data from the data source to the sheet. * Updating a data source creates a data execution to refresh the associated data source sheet similarly. * You can send refresh request to explicitly refresh one or multiple data source objects. - `errorCode` 'DATA_EXECUTION_ERROR_CODE_UNSPECIFIED' | 'TIMED_OUT' | 'TOO_MANY_ROWS' | 'TOO_MANY_COLUMNS' | 'TOO_MANY_CELLS' | 'ENGINE' | 'PARAMETER_INVALID' | 'UNSUPPORTED_DATA_TYPE' | 'DUPLICATE_COLUMN_NAMES' | 'INTERRUPTED' | 'CONCURRENT_QUERY' | 'OTHER' | 'TOO_MANY_CHARS_PER_CELL' | 'DATA_NOT_FOUND' | 'PERMISSION_DENIED' | 'MISSING_COLUMN_ALIAS' | 'OBJECT_NOT_FOUND' | 'OBJECT_IN_ERROR_STATE' | 'OBJECT_SPEC_INVALID' | 'DATA_EXECUTION_CANCELLED' — The error code. - `errorMessage` string — The error message, which may be empty. - `state` 'DATA_EXECUTION_STATE_UNSPECIFIED' | 'NOT_STARTED' | 'RUNNING' | 'CANCELLING' | 'SUCCEEDED' | 'FAILED' — The state of the data execution. - `lastRefreshTime` string, google-datetime — Gets the time the data last successfully refreshed. - `chipRuns` ChipRun[] — Optional. Runs of chips applied to subsections of the cell. Properties of a run start at a specific index in the text and continue until the next run. When reading, all chipped and non-chipped runs are included. Non-chipped runs will have an empty Chip. When writing, only runs with chips are included. Runs containing chips are of length 1 and are represented in the user-entered text by an “@” placeholder symbol. New runs will overwrite any prior runs. Writing a new user_entered_value will erase previous runs. - `startIndex` integer — Required. The zero-based character index where this run starts, in UTF-16 code units. - `chip` Chip — The Smart Chip. - `personProperties` PersonProperties — Properties specific to a linked person. - … - `richLinkProperties` RichLinkProperties — Properties of a link to a Google resource (such as a file in Drive, a YouTube video, a Maps address, or a Calendar event). Only Drive files can be written as chips. All other rich link types are read only. URIs cannot exceed 2000 bytes when writing. NOTE: Writing Drive file chips requires at least one of the `drive.file`, `drive.readonly`, or `drive` OAuth scopes. - … - `formattedValue` string — The formatted value of the cell. This is the value as it's shown to the user. This field is read-only. - `userEnteredValue` ExtendedValue — The kinds of value that a cell in a spreadsheet can have. - `formulaValue` string — Represents a formula. - `numberValue` number, double — Represents a double value. Note: Dates, Times and DateTimes are represented as doubles in SERIAL_NUMBER format. - `stringValue` string — Represents a string value. Leading single quotes are not included. For example, if the user typed `'123` into the UI, this would be represented as a `stringValue` of `"123"`. - `boolValue` boolean — Represents a boolean value. - `errorValue` ErrorValue — An error in a cell. - `type` 'ERROR_TYPE_UNSPECIFIED' | 'ERROR' | 'NULL_VALUE' | 'DIVIDE_BY_ZERO' | 'VALUE' | 'REF' | 'NAME' | 'NUM' | 'N_A' | 'LOADING' — The type of error. - `message` string — A message with more information about the error (in the spreadsheet's locale). - `effectiveFormat` CellFormat — The format of a cell. - `borders` Borders — The borders of the cell. - `bottom` Border — A border along a cell. - … - `right` Border — A border along a cell. - … - `top` Border — A border along a cell. - … - `left` Border — A border along a cell. - … - `numberFormat` NumberFormat — The number format of a cell. - `type` 'NUMBER_FORMAT_TYPE_UNSPECIFIED' | 'TEXT' | 'NUMBER' | 'PERCENT' | 'CURRENCY' | 'DATE' | 'TIME' | 'DATE_TIME' | 'SCIENTIFIC' — The type of the number format. When writing, this field must be set. - `pattern` string — Pattern string used for formatting. If not set, a default pattern based on the spreadsheet's locale will be used if necessary for the given type. See the [Date and Number Formats guide](https://developers.google.com/workspace/sheets/api/guides/formats) for more information about the supported patterns. - `padding` Padding — The amount of padding around the cell, in pixels. When updating padding, every field must be specified. - `top` integer — The top padding of the cell. - `left` integer — The left padding of the cell. - `bottom` integer — The bottom padding of the cell. - `right` integer — The right padding of the cell. - `horizontalAlignment` 'HORIZONTAL_ALIGN_UNSPECIFIED' | 'LEFT' | 'CENTER' | 'RIGHT' — The horizontal alignment of the value in the cell. - `textRotation` TextRotation — The rotation applied to text in a cell. - `vertical` boolean — If true, text reads top to bottom, but the orientation of individual characters is unchanged. For example: | V | | e | | r | | t | | i | | c | | a | | l | - `angle` integer — The angle between the standard orientation and the desired orientation. Measured in degrees. Valid values are between -90 and 90. Positive angles are angled upwards, negative are angled downwards. Note: For LTR text direction positive angles are in the counterclockwise direction, whereas for RTL they are in the clockwise direction - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `verticalAlignment` 'VERTICAL_ALIGN_UNSPECIFIED' | 'TOP' | 'MIDDLE' | 'BOTTOM' — The vertical alignment of the value in the cell. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - `bold` boolean — True if the text is bold. - `fontFamily` string — The font family. - `italic` boolean — True if the text is italicized. - `fontSize` integer — The size of the font. - `foregroundColorStyle` ColorStyle — A color value. - … - `strikethrough` boolean — True if the text has a strikethrough. - `underline` boolean — True if the text is underlined. - `link` Link — An external or local reference. - … - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `hyperlinkDisplayType` 'HYPERLINK_DISPLAY_TYPE_UNSPECIFIED' | 'LINKED' | 'PLAIN_TEXT' — If one exists, how a hyperlink should be displayed in the cell. - `wrapStrategy` 'WRAP_STRATEGY_UNSPECIFIED' | 'OVERFLOW_CELL' | 'LEGACY_WRAP' | 'CLIP' | 'WRAP' — The wrap strategy for the value in the cell. - `backgroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `textDirection` 'TEXT_DIRECTION_UNSPECIFIED' | 'LEFT_TO_RIGHT' | 'RIGHT_TO_LEFT' — The direction of the text in the cell. - `userEnteredFormat` CellFormat — The format of a cell. - `borders` Borders — The borders of the cell. - `bottom` Border — A border along a cell. - … - `right` Border — A border along a cell. - … - `top` Border — A border along a cell. - … - `left` Border — A border along a cell. - … - `numberFormat` NumberFormat — The number format of a cell. - `type` 'NUMBER_FORMAT_TYPE_UNSPECIFIED' | 'TEXT' | 'NUMBER' | 'PERCENT' | 'CURRENCY' | 'DATE' | 'TIME' | 'DATE_TIME' | 'SCIENTIFIC' — The type of the number format. When writing, this field must be set. - `pattern` string — Pattern string used for formatting. If not set, a default pattern based on the spreadsheet's locale will be used if necessary for the given type. See the [Date and Number Formats guide](https://developers.google.com/workspace/sheets/api/guides/formats) for more information about the supported patterns. - `padding` Padding — The amount of padding around the cell, in pixels. When updating padding, every field must be specified. - `top` integer — The top padding of the cell. - `left` integer — The left padding of the cell. - `bottom` integer — The bottom padding of the cell. - `right` integer — The right padding of the cell. - `horizontalAlignment` 'HORIZONTAL_ALIGN_UNSPECIFIED' | 'LEFT' | 'CENTER' | 'RIGHT' — The horizontal alignment of the value in the cell. - `textRotation` TextRotation — The rotation applied to text in a cell. - `vertical` boolean — If true, text reads top to bottom, but the orientation of individual characters is unchanged. For example: | V | | e | | r | | t | | i | | c | | a | | l | - `angle` integer — The angle between the standard orientation and the desired orientation. Measured in degrees. Valid values are between -90 and 90. Positive angles are angled upwards, negative are angled downwards. Note: For LTR text direction positive angles are in the counterclockwise direction, whereas for RTL they are in the clockwise direction - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `verticalAlignment` 'VERTICAL_ALIGN_UNSPECIFIED' | 'TOP' | 'MIDDLE' | 'BOTTOM' — The vertical alignment of the value in the cell. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - `bold` boolean — True if the text is bold. - `fontFamily` string — The font family. - `italic` boolean — True if the text is italicized. - `fontSize` integer — The size of the font. - `foregroundColorStyle` ColorStyle — A color value. - … - `strikethrough` boolean — True if the text has a strikethrough. - `underline` boolean — True if the text is underlined. - `link` Link — An external or local reference. - … - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `hyperlinkDisplayType` 'HYPERLINK_DISPLAY_TYPE_UNSPECIFIED' | 'LINKED' | 'PLAIN_TEXT' — If one exists, how a hyperlink should be displayed in the cell. - `wrapStrategy` 'WRAP_STRATEGY_UNSPECIFIED' | 'OVERFLOW_CELL' | 'LEGACY_WRAP' | 'CLIP' | 'WRAP' — The wrap strategy for the value in the cell. - `backgroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `textDirection` 'TEXT_DIRECTION_UNSPECIFIED' | 'LEFT_TO_RIGHT' | 'RIGHT_TO_LEFT' — The direction of the text in the cell. - `hyperlink` string — A hyperlink this cell points to, if any. If the cell contains multiple hyperlinks, this field will be empty. This field is read-only. To set it, use a `=HYPERLINK` formula in the userEnteredValue.formulaValue field. A cell-level link can also be set from the userEnteredFormat.textFormat field. Alternatively, set a hyperlink in the textFormatRun.format.link field that spans the entire cell. - `note` string — Any note on the cell. - `dataValidation` DataValidationRule — A data validation rule. - `showCustomUi` boolean — True if the UI should be customized based on the kind of condition. If true, "List" conditions will show a dropdown. - `condition` BooleanCondition — A condition that can evaluate to true or false. BooleanConditions are used by conditional formatting, data validation, and the criteria in filters. - `type` 'CONDITION_TYPE_UNSPECIFIED' | 'NUMBER_GREATER' | 'NUMBER_GREATER_THAN_EQ' | 'NUMBER_LESS' | 'NUMBER_LESS_THAN_EQ' | 'NUMBER_EQ' | 'NUMBER_NOT_EQ' | 'NUMBER_BETWEEN' | 'NUMBER_NOT_BETWEEN' | 'TEXT_CONTAINS' | 'TEXT_NOT_CONTAINS' | 'TEXT_STARTS_WITH' | 'TEXT_ENDS_WITH' | 'TEXT_EQ' | 'TEXT_IS_EMAIL' | 'TEXT_IS_URL' | 'DATE_EQ' | 'DATE_BEFORE' | 'DATE_AFTER' | 'DATE_ON_OR_BEFORE' | 'DATE_ON_OR_AFTER' | 'DATE_BETWEEN' | 'DATE_NOT_BETWEEN' | 'DATE_IS_VALID' | 'ONE_OF_RANGE' | 'ONE_OF_LIST' | 'BLANK' | 'NOT_BLANK' | 'CUSTOM_FORMULA' | 'BOOLEAN' | 'TEXT_NOT_EQ' | 'DATE_NOT_EQ' | 'FILTER_EXPRESSION' — The type of condition. - `values` ConditionValue[] — The values of the condition. The number of supported values depends on the condition type. Some support zero values, others one or two values, and ConditionType.ONE_OF_LIST supports an arbitrary number of values. - … - `strict` boolean — True if invalid data should be rejected. - `inputMessage` string — A message to show the user when adding data to the cell. - `textFormatRuns` TextFormatRun[] — Runs of rich text applied to subsections of the cell. Runs are only valid on user entered strings, not formulas, bools, or numbers. Properties of a run start at a specific index in the text and continue until the next run. Runs will inherit the properties of the cell unless explicitly changed. When writing, the new runs will overwrite any prior runs. When writing a new user_entered_value, previous runs are erased. - `format` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - `bold` boolean — True if the text is bold. - `fontFamily` string — The font family. - `italic` boolean — True if the text is italicized. - `fontSize` integer — The size of the font. - `foregroundColorStyle` ColorStyle — A color value. - … - `strikethrough` boolean — True if the text has a strikethrough. - `underline` boolean — True if the text is underlined. - `link` Link — An external or local reference. - … - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `startIndex` integer — The zero-based character index where this run starts, in UTF-16 code units. - `effectiveValue` ExtendedValue — The kinds of value that a cell in a spreadsheet can have. - `formulaValue` string — Represents a formula. - `numberValue` number, double — Represents a double value. Note: Dates, Times and DateTimes are represented as doubles in SERIAL_NUMBER format. - `stringValue` string — Represents a string value. Leading single quotes are not included. For example, if the user typed `'123` into the UI, this would be represented as a `stringValue` of `"123"`. - `boolValue` boolean — Represents a boolean value. - `errorValue` ErrorValue — An error in a cell. - `type` 'ERROR_TYPE_UNSPECIFIED' | 'ERROR' | 'NULL_VALUE' | 'DIVIDE_BY_ZERO' | 'VALUE' | 'REF' | 'NAME' | 'NUM' | 'N_A' | 'LOADING' — The type of error. - `message` string — A message with more information about the error (in the spreadsheet's locale). - `dataSourceFormula` DataSourceFormula — A data source formula. - `dataSourceId` string — The ID of the data source the formula is associated with. - `dataExecutionStatus` DataExecutionStatus — The data execution status. A data execution is created to sync a data source object with the latest data from a DataSource. It is usually scheduled to run at background, you can check its state to tell if an execution completes There are several scenarios where a data execution is triggered to run: * Adding a data source creates an associated data source sheet as well as a data execution to sync the data from the data source to the sheet. * Updating a data source creates a data execution to refresh the associated data source sheet similarly. * You can send refresh request to explicitly refresh one or multiple data source objects. - `errorCode` 'DATA_EXECUTION_ERROR_CODE_UNSPECIFIED' | 'TIMED_OUT' | 'TOO_MANY_ROWS' | 'TOO_MANY_COLUMNS' | 'TOO_MANY_CELLS' | 'ENGINE' | 'PARAMETER_INVALID' | 'UNSUPPORTED_DATA_TYPE' | 'DUPLICATE_COLUMN_NAMES' | 'INTERRUPTED' | 'CONCURRENT_QUERY' | 'OTHER' | 'TOO_MANY_CHARS_PER_CELL' | 'DATA_NOT_FOUND' | 'PERMISSION_DENIED' | 'MISSING_COLUMN_ALIAS' | 'OBJECT_NOT_FOUND' | 'OBJECT_IN_ERROR_STATE' | 'OBJECT_SPEC_INVALID' | 'DATA_EXECUTION_CANCELLED' — The error code. - `errorMessage` string — The error message, which may be empty. - `state` 'DATA_EXECUTION_STATE_UNSPECIFIED' | 'NOT_STARTED' | 'RUNNING' | 'CANCELLING' | 'SUCCEEDED' | 'FAILED' — The state of the data execution. - `lastRefreshTime` string, google-datetime — Gets the time the data last successfully refreshed. - `fields` string, google-fieldmask — The fields that should be updated. At least one field must be specified. The root `cell` is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `deleteNamedRange` DeleteNamedRangeRequest — Removes the named range with the given ID from the spreadsheet. - `namedRangeId` string — The ID of the named range to delete. - `deleteConditionalFormatRule` DeleteConditionalFormatRuleRequest — Deletes a conditional format rule at the given index. All subsequent rules' indexes are decremented. - `index` integer — The zero-based index of the rule to be deleted. - `sheetId` integer — The sheet the rule is being deleted from. - `autoFill` AutoFillRequest — Fills in more data based on existing data. - `useAlternateSeries` boolean — True if we should generate data with the "alternate" series. This differs based on the type and amount of source data. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `sourceAndDestination` SourceAndDestination — A combination of a source range and how to extend that source. - `fillLength` integer — The number of rows or columns that data should be filled into. Positive numbers expand beyond the last row or last column of the source. Negative numbers expand before the first row or first column of the source. - `source` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `dimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension that data should be filled into. - `addSheet` AddSheetRequest — Adds a new sheet. When a sheet is added at a given index, all subsequent sheets' indexes are incremented. To add an object sheet, use AddChartRequest instead and specify EmbeddedObjectPosition.sheetId or EmbeddedObjectPosition.newSheet. - `properties` SheetProperties — Properties of a sheet. - `tabColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `tabColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `sheetId` integer — The ID of the sheet. Must be non-negative. This field cannot be changed once set. - `gridProperties` GridProperties — Properties of a grid. - `rowCount` integer — The number of rows in the grid. - `frozenColumnCount` integer — The number of columns that are frozen in the grid. - `rowGroupControlAfter` boolean — True if the row grouping control toggle is shown after the group. - `columnCount` integer — The number of columns in the grid. - `frozenRowCount` integer — The number of rows that are frozen in the grid. - `columnGroupControlAfter` boolean — True if the column grouping control toggle is shown after the group. - `hideGridlines` boolean — True if the grid isn't showing gridlines in the UI. - `sheetType` 'SHEET_TYPE_UNSPECIFIED' | 'GRID' | 'OBJECT' | 'DATA_SOURCE' — The type of sheet. Defaults to GRID. This field cannot be changed once set. - `index` integer — The index of the sheet within the spreadsheet. When adding or updating sheet properties, if this field is excluded then the sheet is added or moved to the end of the sheet list. When updating sheet indices or inserting sheets, movement is considered in "before the move" indexes. For example, if there were three sheets (S1, S2, S3) in order to move S1 ahead of S2 the index would have to be set to 2. A sheet index update request is ignored if the requested index is identical to the sheets current index or if the requested new index is equal to the current sheet index + 1. - `dataSourceSheetProperties` DataSourceSheetProperties — Additional properties of a DATA_SOURCE sheet. - `dataExecutionStatus` DataExecutionStatus — The data execution status. A data execution is created to sync a data source object with the latest data from a DataSource. It is usually scheduled to run at background, you can check its state to tell if an execution completes There are several scenarios where a data execution is triggered to run: * Adding a data source creates an associated data source sheet as well as a data execution to sync the data from the data source to the sheet. * Updating a data source creates a data execution to refresh the associated data source sheet similarly. * You can send refresh request to explicitly refresh one or multiple data source objects. - `errorCode` 'DATA_EXECUTION_ERROR_CODE_UNSPECIFIED' | 'TIMED_OUT' | 'TOO_MANY_ROWS' | 'TOO_MANY_COLUMNS' | 'TOO_MANY_CELLS' | 'ENGINE' | 'PARAMETER_INVALID' | 'UNSUPPORTED_DATA_TYPE' | 'DUPLICATE_COLUMN_NAMES' | 'INTERRUPTED' | 'CONCURRENT_QUERY' | 'OTHER' | 'TOO_MANY_CHARS_PER_CELL' | 'DATA_NOT_FOUND' | 'PERMISSION_DENIED' | 'MISSING_COLUMN_ALIAS' | 'OBJECT_NOT_FOUND' | 'OBJECT_IN_ERROR_STATE' | 'OBJECT_SPEC_INVALID' | 'DATA_EXECUTION_CANCELLED' — The error code. - `errorMessage` string — The error message, which may be empty. - `state` 'DATA_EXECUTION_STATE_UNSPECIFIED' | 'NOT_STARTED' | 'RUNNING' | 'CANCELLING' | 'SUCCEEDED' | 'FAILED' — The state of the data execution. - `lastRefreshTime` string, google-datetime — Gets the time the data last successfully refreshed. - `columns` DataSourceColumn[] — The columns displayed on the sheet, corresponding to the values in RowData. - `formula` string — The formula of the calculated column. - `reference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `dataSourceId` string — ID of the DataSource the sheet is connected to. - `hidden` boolean — True if the sheet is hidden in the UI, false if it's visible. - `rightToLeft` boolean — True if the sheet is an RTL sheet instead of an LTR sheet. - `title` string — The name of the sheet. - `deleteProtectedRange` DeleteProtectedRangeRequest — Deletes the protected range with the given ID. - `protectedRangeId` integer — The ID of the protected range to delete. - `sortRange` SortRangeRequest — Sorts data in rows based on a sort order per column. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `sortSpecs` SortSpec[] — The sort order per column. Later specifications are used when values are equal in the earlier specifications. - `backgroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `dimensionIndex` integer — The dimension the sort should be applied to. - `foregroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - `name` string — The display name of the column. It should be unique within a data source. - `sortOrder` 'SORT_ORDER_UNSPECIFIED' | 'ASCENDING' | 'DESCENDING' — The order data should be sorted. - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `trimWhitespace` TrimWhitespaceRequest — Trims the whitespace (such as spaces, tabs, or new lines) in every cell in the specified range. This request removes all whitespace from the start and end of each cell's text, and reduces any subsequence of remaining whitespace characters to a single space. If the resulting trimmed text starts with a '+' or '=' character, the text remains as a string value and isn't interpreted as a formula. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `deleteDataSource` DeleteDataSourceRequest — Deletes a data source. The request also deletes the associated data source sheet, and unlinks all associated data source objects. - `dataSourceId` string — The ID of the data source to delete. - `appendCells` AppendCellsRequest — Adds new cells after the last row with data in a sheet, inserting new rows into the sheet if necessary. - `fields` string, google-fieldmask — The fields of CellData that should be updated. At least one field must be specified. The root is the CellData; 'row.values.' should not be specified. A single `"*"` can be used as short-hand for listing every field. - `tableId` string — The ID of the table to append data to. The data will be only appended to the table body. This field also takes precedence over the `sheet_id` field. - `sheetId` integer — The sheet ID to append the data to. - `rows` RowData[] — The data to append. - `values` CellData[] — The values in the row, one per column. - `dataSourceTable` DataSourceTable — A data source table, which allows the user to import a static table of data from the DataSource into Sheets. This is also known as "Extract" in the Sheets editor. - `sortSpecs` SortSpec[] — Sort specifications in the data source table. The result of the data source table is sorted based on the sort specifications in order. - … - `dataExecutionStatus` DataExecutionStatus — The data execution status. A data execution is created to sync a data source object with the latest data from a DataSource. It is usually scheduled to run at background, you can check its state to tell if an execution completes There are several scenarios where a data execution is triggered to run: * Adding a data source creates an associated data source sheet as well as a data execution to sync the data from the data source to the sheet. * Updating a data source creates a data execution to refresh the associated data source sheet similarly. * You can send refresh request to explicitly refresh one or multiple data source objects. - … - `columns` DataSourceColumnReference[] — Columns selected for the data source table. The column_selection_type must be SELECTED. - … - `rowLimit` integer — The limit of rows to return. If not set, a default limit is applied. Please refer to the Sheets editor for the default and max limit. - `dataSourceId` string — The ID of the data source the data source table is associated with. - `columnSelectionType` 'DATA_SOURCE_TABLE_COLUMN_SELECTION_TYPE_UNSPECIFIED' | 'SELECTED' | 'SYNC_ALL' — The type to select columns for the data source table. Defaults to SELECTED. - `filterSpecs` FilterSpec[] — Filter specifications in the data source table. - … - `pivotTable` PivotTable — A pivot table. - `valueLayout` 'HORIZONTAL' | 'VERTICAL' — Whether values should be listed horizontally (as columns) or vertically (as rows). - `filterSpecs` PivotFilterSpec[] — The filters applied to the source columns before aggregating data for the pivot table. Both criteria and filter_specs are populated in responses. If both fields are specified in an update request, this field takes precedence. - … - `columns` PivotGroup[] — Each column grouping in the pivot table. - … - `dataSourceId` string — The ID of the data source the pivot table is reading data from. - `criteria` object — An optional mapping of filters per source column offset. The filters are applied before aggregating data into the pivot table. The map's key is the column offset of the source range that you want to filter, and the value is the criteria for that column. For example, if the source was `C10:E15`, a key of `0` will have the filter for column `C`, whereas the key `1` is for column `D`. This field is deprecated in favor of filter_specs. - `values` PivotValue[] — A list of values to include in the pivot table. - … - `source` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - … - `rows` PivotGroup[] — Each row grouping in the pivot table. - … - `dataExecutionStatus` DataExecutionStatus — The data execution status. A data execution is created to sync a data source object with the latest data from a DataSource. It is usually scheduled to run at background, you can check its state to tell if an execution completes There are several scenarios where a data execution is triggered to run: * Adding a data source creates an associated data source sheet as well as a data execution to sync the data from the data source to the sheet. * Updating a data source creates a data execution to refresh the associated data source sheet similarly. * You can send refresh request to explicitly refresh one or multiple data source objects. - … - `chipRuns` ChipRun[] — Optional. Runs of chips applied to subsections of the cell. Properties of a run start at a specific index in the text and continue until the next run. When reading, all chipped and non-chipped runs are included. Non-chipped runs will have an empty Chip. When writing, only runs with chips are included. Runs containing chips are of length 1 and are represented in the user-entered text by an “@” placeholder symbol. New runs will overwrite any prior runs. Writing a new user_entered_value will erase previous runs. - `startIndex` integer — Required. The zero-based character index where this run starts, in UTF-16 code units. - `chip` Chip — The Smart Chip. - … - `formattedValue` string — The formatted value of the cell. This is the value as it's shown to the user. This field is read-only. - `userEnteredValue` ExtendedValue — The kinds of value that a cell in a spreadsheet can have. - `formulaValue` string — Represents a formula. - `numberValue` number, double — Represents a double value. Note: Dates, Times and DateTimes are represented as doubles in SERIAL_NUMBER format. - `stringValue` string — Represents a string value. Leading single quotes are not included. For example, if the user typed `'123` into the UI, this would be represented as a `stringValue` of `"123"`. - `boolValue` boolean — Represents a boolean value. - `errorValue` ErrorValue — An error in a cell. - … - `effectiveFormat` CellFormat — The format of a cell. - `borders` Borders — The borders of the cell. - … - `numberFormat` NumberFormat — The number format of a cell. - … - `padding` Padding — The amount of padding around the cell, in pixels. When updating padding, every field must be specified. - … - `horizontalAlignment` 'HORIZONTAL_ALIGN_UNSPECIFIED' | 'LEFT' | 'CENTER' | 'RIGHT' — The horizontal alignment of the value in the cell. - `textRotation` TextRotation — The rotation applied to text in a cell. - … - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `verticalAlignment` 'VERTICAL_ALIGN_UNSPECIFIED' | 'TOP' | 'MIDDLE' | 'BOTTOM' — The vertical alignment of the value in the cell. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - … - `hyperlinkDisplayType` 'HYPERLINK_DISPLAY_TYPE_UNSPECIFIED' | 'LINKED' | 'PLAIN_TEXT' — If one exists, how a hyperlink should be displayed in the cell. - `wrapStrategy` 'WRAP_STRATEGY_UNSPECIFIED' | 'OVERFLOW_CELL' | 'LEGACY_WRAP' | 'CLIP' | 'WRAP' — The wrap strategy for the value in the cell. - `backgroundColorStyle` ColorStyle — A color value. - … - `textDirection` 'TEXT_DIRECTION_UNSPECIFIED' | 'LEFT_TO_RIGHT' | 'RIGHT_TO_LEFT' — The direction of the text in the cell. - `userEnteredFormat` CellFormat — The format of a cell. - `borders` Borders — The borders of the cell. - … - `numberFormat` NumberFormat — The number format of a cell. - … - `padding` Padding — The amount of padding around the cell, in pixels. When updating padding, every field must be specified. - … - `horizontalAlignment` 'HORIZONTAL_ALIGN_UNSPECIFIED' | 'LEFT' | 'CENTER' | 'RIGHT' — The horizontal alignment of the value in the cell. - `textRotation` TextRotation — The rotation applied to text in a cell. - … - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `verticalAlignment` 'VERTICAL_ALIGN_UNSPECIFIED' | 'TOP' | 'MIDDLE' | 'BOTTOM' — The vertical alignment of the value in the cell. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - … - `hyperlinkDisplayType` 'HYPERLINK_DISPLAY_TYPE_UNSPECIFIED' | 'LINKED' | 'PLAIN_TEXT' — If one exists, how a hyperlink should be displayed in the cell. - `wrapStrategy` 'WRAP_STRATEGY_UNSPECIFIED' | 'OVERFLOW_CELL' | 'LEGACY_WRAP' | 'CLIP' | 'WRAP' — The wrap strategy for the value in the cell. - `backgroundColorStyle` ColorStyle — A color value. - … - `textDirection` 'TEXT_DIRECTION_UNSPECIFIED' | 'LEFT_TO_RIGHT' | 'RIGHT_TO_LEFT' — The direction of the text in the cell. - `hyperlink` string — A hyperlink this cell points to, if any. If the cell contains multiple hyperlinks, this field will be empty. This field is read-only. To set it, use a `=HYPERLINK` formula in the userEnteredValue.formulaValue field. A cell-level link can also be set from the userEnteredFormat.textFormat field. Alternatively, set a hyperlink in the textFormatRun.format.link field that spans the entire cell. - `note` string — Any note on the cell. - `dataValidation` DataValidationRule — A data validation rule. - `showCustomUi` boolean — True if the UI should be customized based on the kind of condition. If true, "List" conditions will show a dropdown. - `condition` BooleanCondition — A condition that can evaluate to true or false. BooleanConditions are used by conditional formatting, data validation, and the criteria in filters. - … - `strict` boolean — True if invalid data should be rejected. - `inputMessage` string — A message to show the user when adding data to the cell. - `textFormatRuns` TextFormatRun[] — Runs of rich text applied to subsections of the cell. Runs are only valid on user entered strings, not formulas, bools, or numbers. Properties of a run start at a specific index in the text and continue until the next run. Runs will inherit the properties of the cell unless explicitly changed. When writing, the new runs will overwrite any prior runs. When writing a new user_entered_value, previous runs are erased. - `format` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - … - `startIndex` integer — The zero-based character index where this run starts, in UTF-16 code units. - `effectiveValue` ExtendedValue — The kinds of value that a cell in a spreadsheet can have. - `formulaValue` string — Represents a formula. - `numberValue` number, double — Represents a double value. Note: Dates, Times and DateTimes are represented as doubles in SERIAL_NUMBER format. - `stringValue` string — Represents a string value. Leading single quotes are not included. For example, if the user typed `'123` into the UI, this would be represented as a `stringValue` of `"123"`. - `boolValue` boolean — Represents a boolean value. - `errorValue` ErrorValue — An error in a cell. - … - `dataSourceFormula` DataSourceFormula — A data source formula. - `dataSourceId` string — The ID of the data source the formula is associated with. - `dataExecutionStatus` DataExecutionStatus — The data execution status. A data execution is created to sync a data source object with the latest data from a DataSource. It is usually scheduled to run at background, you can check its state to tell if an execution completes There are several scenarios where a data execution is triggered to run: * Adding a data source creates an associated data source sheet as well as a data execution to sync the data from the data source to the sheet. * Updating a data source creates a data execution to refresh the associated data source sheet similarly. * You can send refresh request to explicitly refresh one or multiple data source objects. - … - `addTable` AddTableRequest — Adds a new table to the spreadsheet. - `table` Table — A table. - `tableId` string — The id of the table. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `rowsProperties` TableRowsProperties — The table row properties. - `headerColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `firstBandColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `secondBandColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `footerColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `name` string — The table name. This is unique to all tables in the same spreadsheet. - `columnProperties` TableColumnProperties[] — The table column properties. - `columnIndex` integer — The 0-based column index. This index is relative to its position in the table and is not necessarily the same as the column index in the sheet. - `columnName` string — The column name. - `columnType` 'COLUMN_TYPE_UNSPECIFIED' | 'DOUBLE' | 'CURRENCY' | 'PERCENT' | 'DATE' | 'TIME' | 'DATE_TIME' | 'TEXT' | 'BOOLEAN' | 'DROPDOWN' | 'FILES_CHIP' | 'PEOPLE_CHIP' | 'FINANCE_CHIP' | 'PLACE_CHIP' | 'RATINGS_CHIP' — The column type. - `dataValidationRule` TableColumnDataValidationRule — A data validation rule for a column in a table. - `condition` BooleanCondition — A condition that can evaluate to true or false. BooleanConditions are used by conditional formatting, data validation, and the criteria in filters. - … - `addProtectedRange` AddProtectedRangeRequest — Adds a new protected range. - `protectedRange` ProtectedRange — A protected range. - `warningOnly` boolean — True if this protected range will show a warning when editing. Warning-based protection means that every user can edit data in the protected range, except editing will prompt a warning asking the user to confirm the edit. When writing: if this field is true, then editors are ignored. Additionally, if this field is changed from true to false and the `editors` field is not set (nor included in the field mask), then the editors will be set to all the editors in the document. - `description` string — The description of this protected range. - `editors` Editors — The editors of a protected range. - `users` string[] — The email addresses of users with edit access to the protected range. - `groups` string[] — The email addresses of groups with edit access to the protected range. - `domainUsersCanEdit` boolean — True if anyone in the document's domain has edit access to the protected range. Domain protection is only supported on documents within a domain. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `tableId` string — The table this protected range is backed by, if any. When writing, only one of range or named_range_id or table_id may be set. - `unprotectedRanges` GridRange[] — The list of unprotected ranges within a protected sheet. Unprotected ranges are only supported on protected sheets. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `protectedRangeId` integer — The ID of the protected range. This field is read-only. - `requestingUserCanEdit` boolean — True if the user who requested this protected range can edit the protected area. This field is read-only. - `namedRangeId` string — The named range this protected range is backed by, if any. When writing, only one of range or named_range_id or table_id may be set. - `setDataValidation` SetDataValidationRequest — Sets a data validation rule to every cell in the range. To clear validation in a range, call this with no rule specified. - `rule` DataValidationRule — A data validation rule. - `showCustomUi` boolean — True if the UI should be customized based on the kind of condition. If true, "List" conditions will show a dropdown. - `condition` BooleanCondition — A condition that can evaluate to true or false. BooleanConditions are used by conditional formatting, data validation, and the criteria in filters. - `type` 'CONDITION_TYPE_UNSPECIFIED' | 'NUMBER_GREATER' | 'NUMBER_GREATER_THAN_EQ' | 'NUMBER_LESS' | 'NUMBER_LESS_THAN_EQ' | 'NUMBER_EQ' | 'NUMBER_NOT_EQ' | 'NUMBER_BETWEEN' | 'NUMBER_NOT_BETWEEN' | 'TEXT_CONTAINS' | 'TEXT_NOT_CONTAINS' | 'TEXT_STARTS_WITH' | 'TEXT_ENDS_WITH' | 'TEXT_EQ' | 'TEXT_IS_EMAIL' | 'TEXT_IS_URL' | 'DATE_EQ' | 'DATE_BEFORE' | 'DATE_AFTER' | 'DATE_ON_OR_BEFORE' | 'DATE_ON_OR_AFTER' | 'DATE_BETWEEN' | 'DATE_NOT_BETWEEN' | 'DATE_IS_VALID' | 'ONE_OF_RANGE' | 'ONE_OF_LIST' | 'BLANK' | 'NOT_BLANK' | 'CUSTOM_FORMULA' | 'BOOLEAN' | 'TEXT_NOT_EQ' | 'DATE_NOT_EQ' | 'FILTER_EXPRESSION' — The type of condition. - `values` ConditionValue[] — The values of the condition. The number of supported values depends on the condition type. Some support zero values, others one or two values, and ConditionType.ONE_OF_LIST supports an arbitrary number of values. - `relativeDate` 'RELATIVE_DATE_UNSPECIFIED' | 'PAST_YEAR' | 'PAST_MONTH' | 'PAST_WEEK' | 'YESTERDAY' | 'TODAY' | 'TOMORROW' — A relative date (based on the current date). Valid only if the type is DATE_BEFORE, DATE_AFTER, DATE_ON_OR_BEFORE or DATE_ON_OR_AFTER. Relative dates are not supported in data validation. They are supported only in conditional formatting and conditional filters. - `userEnteredValue` string — A value the condition is based on. The value is parsed as if the user typed into a cell. Formulas are supported (and must begin with an `=` or a '+'). - `strict` boolean — True if invalid data should be rejected. - `inputMessage` string — A message to show the user when adding data to the cell. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `filteredRowsIncluded` boolean — Optional. If true, the data validation rule will be applied to the filtered rows as well. - `addDataSource` AddDataSourceRequest — Adds a data source. After the data source is added successfully, an associated DATA_SOURCE sheet is created and an execution is triggered to refresh the sheet to read data from the data source. The request requires an additional `bigquery.readonly` OAuth scope if you are adding a BigQuery data source. - `dataSource` DataSource — Information about an external data source in the spreadsheet. - `calculatedColumns` DataSourceColumn[] — All calculated columns in the data source. - `formula` string — The formula of the calculated column. - `reference` DataSourceColumnReference — An unique identifier that references a data source column. - `name` string — The display name of the column. It should be unique within a data source. - `dataSourceId` string — The spreadsheet-scoped unique ID that identifies the data source. Example: 1080547365. - `spec` DataSourceSpec — This specifies the details of the data source. For example, for BigQuery, this specifies information about the BigQuery source. - `looker` LookerDataSourceSpec — The specification of a Looker data source. - `instanceUri` string — A Looker instance URL. - `explore` string — Name of a Looker model explore. - `model` string — Name of a Looker model. - `bigQuery` BigQueryDataSourceSpec — The specification of a BigQuery data source that's connected to a sheet. - `projectId` string — The ID of a BigQuery enabled Google Cloud project with a billing account attached. For any queries executed against the data source, the project is charged. - `tableSpec` BigQueryTableSpec — Specifies a BigQuery table definition. Only [native tables](https://cloud.google.com/bigquery/docs/tables-intro) are allowed. - … - `querySpec` BigQueryQuerySpec — Specifies a custom BigQuery query. - … - `parameters` DataSourceParameter[] — The parameters of the data source, used when querying the data source. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - … - `name` string — Named parameter. Must be a legitimate identifier for the DataSource that supports it. For example, [BigQuery identifier](https://cloud.google.com/bigquery/docs/reference/standard-sql/lexical#identifiers). - `namedRangeId` string — ID of a NamedRange. Its size must be 1x1. - `sheetId` integer — The ID of the Sheet connected with the data source. The field cannot be changed once set. When creating a data source, an associated DATA_SOURCE sheet is also created, if the field is not specified, the ID of the created sheet will be randomly generated. - `copyPaste` CopyPasteRequest — Copies data from the source to the destination. - `source` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `pasteOrientation` 'NORMAL' | 'TRANSPOSE' — How that data should be oriented when pasting. - `destination` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `pasteType` 'PASTE_NORMAL' | 'PASTE_VALUES' | 'PASTE_FORMAT' | 'PASTE_NO_BORDERS' | 'PASTE_FORMULA' | 'PASTE_DATA_VALIDATION' | 'PASTE_CONDITIONAL_FORMATTING' — What kind of data to paste. - `addDimensionGroup` AddDimensionGroupRequest — Creates a group over the specified range. If the requested range is a superset of the range of an existing group G, then the depth of G is incremented and this new group G' has the depth of that group. For example, a group [C:D, depth 1] + [B:E] results in groups [B:E, depth 1] and [C:D, depth 2]. If the requested range is a subset of the range of an existing group G, then the depth of the new group G' becomes one greater than the depth of G. For example, a group [B:E, depth 1] + [C:D] results in groups [B:E, depth 1] and [C:D, depth 2]. If the requested range starts before and ends within, or starts within and ends after, the range of an existing group G, then the range of the existing group G becomes the union of the ranges, and the new group G' has depth one greater than the depth of G and range as the intersection of the ranges. For example, a group [B:D, depth 1] + [C:E] results in groups [B:E, depth 1] and [C:D, depth 2]. - `range` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - `sheetId` integer — The sheet this span is on. - `startIndex` integer — The start (inclusive) of the span, or not set if unbounded. - `dimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension of the span. - `endIndex` integer — The end (exclusive) of the span, or not set if unbounded. - `updateSheetProperties` UpdateSheetPropertiesRequest — Updates properties of the sheet with the specified sheetId. - `properties` SheetProperties — Properties of a sheet. - `tabColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `tabColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `sheetId` integer — The ID of the sheet. Must be non-negative. This field cannot be changed once set. - `gridProperties` GridProperties — Properties of a grid. - `rowCount` integer — The number of rows in the grid. - `frozenColumnCount` integer — The number of columns that are frozen in the grid. - `rowGroupControlAfter` boolean — True if the row grouping control toggle is shown after the group. - `columnCount` integer — The number of columns in the grid. - `frozenRowCount` integer — The number of rows that are frozen in the grid. - `columnGroupControlAfter` boolean — True if the column grouping control toggle is shown after the group. - `hideGridlines` boolean — True if the grid isn't showing gridlines in the UI. - `sheetType` 'SHEET_TYPE_UNSPECIFIED' | 'GRID' | 'OBJECT' | 'DATA_SOURCE' — The type of sheet. Defaults to GRID. This field cannot be changed once set. - `index` integer — The index of the sheet within the spreadsheet. When adding or updating sheet properties, if this field is excluded then the sheet is added or moved to the end of the sheet list. When updating sheet indices or inserting sheets, movement is considered in "before the move" indexes. For example, if there were three sheets (S1, S2, S3) in order to move S1 ahead of S2 the index would have to be set to 2. A sheet index update request is ignored if the requested index is identical to the sheets current index or if the requested new index is equal to the current sheet index + 1. - `dataSourceSheetProperties` DataSourceSheetProperties — Additional properties of a DATA_SOURCE sheet. - `dataExecutionStatus` DataExecutionStatus — The data execution status. A data execution is created to sync a data source object with the latest data from a DataSource. It is usually scheduled to run at background, you can check its state to tell if an execution completes There are several scenarios where a data execution is triggered to run: * Adding a data source creates an associated data source sheet as well as a data execution to sync the data from the data source to the sheet. * Updating a data source creates a data execution to refresh the associated data source sheet similarly. * You can send refresh request to explicitly refresh one or multiple data source objects. - `errorCode` 'DATA_EXECUTION_ERROR_CODE_UNSPECIFIED' | 'TIMED_OUT' | 'TOO_MANY_ROWS' | 'TOO_MANY_COLUMNS' | 'TOO_MANY_CELLS' | 'ENGINE' | 'PARAMETER_INVALID' | 'UNSUPPORTED_DATA_TYPE' | 'DUPLICATE_COLUMN_NAMES' | 'INTERRUPTED' | 'CONCURRENT_QUERY' | 'OTHER' | 'TOO_MANY_CHARS_PER_CELL' | 'DATA_NOT_FOUND' | 'PERMISSION_DENIED' | 'MISSING_COLUMN_ALIAS' | 'OBJECT_NOT_FOUND' | 'OBJECT_IN_ERROR_STATE' | 'OBJECT_SPEC_INVALID' | 'DATA_EXECUTION_CANCELLED' — The error code. - `errorMessage` string — The error message, which may be empty. - `state` 'DATA_EXECUTION_STATE_UNSPECIFIED' | 'NOT_STARTED' | 'RUNNING' | 'CANCELLING' | 'SUCCEEDED' | 'FAILED' — The state of the data execution. - `lastRefreshTime` string, google-datetime — Gets the time the data last successfully refreshed. - `columns` DataSourceColumn[] — The columns displayed on the sheet, corresponding to the values in RowData. - `formula` string — The formula of the calculated column. - `reference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `dataSourceId` string — ID of the DataSource the sheet is connected to. - `hidden` boolean — True if the sheet is hidden in the UI, false if it's visible. - `rightToLeft` boolean — True if the sheet is an RTL sheet instead of an LTR sheet. - `title` string — The name of the sheet. - `fields` string, google-fieldmask — The fields that should be updated. At least one field must be specified. The root `properties` is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `mergeCells` MergeCellsRequest — Merges all cells in the range. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `mergeType` 'MERGE_ALL' | 'MERGE_COLUMNS' | 'MERGE_ROWS' — How the cells should be merged. - `addFilterView` AddFilterViewRequest — Adds a filter view. - `filter` FilterView — A filter view. For more information, see [Manage data visibility with filters](https://developers.google.com/workspace/sheets/api/guides/filters). - `title` string — The name of the filter view. - `namedRangeId` string — The named range this filter view is backed by, if any. When writing, only one of range, named_range_id, or table_id may be set. - `filterViewId` integer — The ID of the filter view. - `filterSpecs` FilterSpec[] — The filter criteria for showing or hiding values per column. Both criteria and filter_specs are populated in responses. If both fields are specified in an update request, this field takes precedence. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - `name` string — The display name of the column. It should be unique within a data source. - `filterCriteria` FilterCriteria — Criteria for showing or hiding rows in a filter or filter view. - `visibleBackgroundColorStyle` ColorStyle — A color value. - … - `visibleBackgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `visibleForegroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `hiddenValues` string[] — Values that should be hidden. - `visibleForegroundColorStyle` ColorStyle — A color value. - … - `condition` BooleanCondition — A condition that can evaluate to true or false. BooleanConditions are used by conditional formatting, data validation, and the criteria in filters. - … - `columnIndex` integer — The zero-based column index. - `sortSpecs` SortSpec[] — The sort order per column. Later specifications are used when values are equal in the earlier specifications. - `backgroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `dimensionIndex` integer — The dimension the sort should be applied to. - `foregroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - `name` string — The display name of the column. It should be unique within a data source. - `sortOrder` 'SORT_ORDER_UNSPECIFIED' | 'ASCENDING' | 'DESCENDING' — The order data should be sorted. - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `tableId` string — The table this filter view is backed by, if any. When writing, only one of range, named_range_id, or table_id may be set. - `criteria` object — The criteria for showing/hiding values per column. The map's key is the column index, and the value is the criteria for that column. This field is deprecated in favor of filter_specs. - `updateBanding` UpdateBandingRequest — Updates properties of the supplied banded range. - `bandedRange` BandedRange — A banded (alternating colors) range in a sheet. - `bandedRangeId` integer — The ID of the banded range. If unset, refer to banded_range_reference. - `rowProperties` BandingProperties — Properties referring a single dimension (either row or column). If both BandedRange.row_properties and BandedRange.column_properties are set, the fill colors are applied to cells according to the following rules: * header_color and footer_color take priority over band colors. * first_band_color takes priority over second_band_color. * row_properties takes priority over column_properties. For example, the first row color takes priority over the first column color, but the first column color takes priority over the second row color. Similarly, the row header takes priority over the column header in the top left cell, but the column header takes priority over the first row color if the row header is not set. - `firstBandColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `footerColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `secondBandColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `headerColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `headerColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `firstBandColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `secondBandColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `footerColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `columnProperties` BandingProperties — Properties referring a single dimension (either row or column). If both BandedRange.row_properties and BandedRange.column_properties are set, the fill colors are applied to cells according to the following rules: * header_color and footer_color take priority over band colors. * first_band_color takes priority over second_band_color. * row_properties takes priority over column_properties. For example, the first row color takes priority over the first column color, but the first column color takes priority over the second row color. Similarly, the row header takes priority over the column header in the top left cell, but the column header takes priority over the first row color if the row header is not set. - `firstBandColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `footerColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `secondBandColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `headerColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `headerColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `firstBandColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `secondBandColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `footerColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `bandedRangeReference` string — Output only. The reference of the banded range, used to identify the ID that is not supported by the banded_range_id. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `fields` string, google-fieldmask — The fields that should be updated. At least one field must be specified. The root `bandedRange` is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `pasteData` PasteDataRequest — Inserts data into the spreadsheet starting at the specified coordinate. - `delimiter` string — The delimiter in the data. - `coordinate` GridCoordinate — A coordinate in a sheet. All indexes are zero-based. - `sheetId` integer — The sheet this coordinate is on. - `rowIndex` integer — The row index of the coordinate. - `columnIndex` integer — The column index of the coordinate. - `html` boolean — True if the data is HTML. - `type` 'PASTE_NORMAL' | 'PASTE_VALUES' | 'PASTE_FORMAT' | 'PASTE_NO_BORDERS' | 'PASTE_FORMULA' | 'PASTE_DATA_VALIDATION' | 'PASTE_CONDITIONAL_FORMATTING' — How the data should be pasted. - `data` string — The data to insert. - `updateSpreadsheetProperties` UpdateSpreadsheetPropertiesRequest — Updates properties of a spreadsheet. - `properties` SpreadsheetProperties — Properties of a spreadsheet. - `locale` string — The locale of the spreadsheet in one of the following formats: * an ISO 639-1 language code such as `en` * an ISO 639-2 language code such as `fil`, if no 639-1 code exists * a combination of the ISO language code and country code, such as `en_US` Note: when updating this field, not all locales/languages are supported. - `timeZone` string — The time zone of the spreadsheet, in CLDR format such as `America/New_York`. If the time zone isn't recognized, this may be a custom time zone such as `GMT-07:00`. - `title` string — The title of the spreadsheet. - `autoRecalc` 'RECALCULATION_INTERVAL_UNSPECIFIED' | 'ON_CHANGE' | 'MINUTE' | 'HOUR' — The amount of time to wait before volatile functions are recalculated. - `defaultFormat` CellFormat — The format of a cell. - `borders` Borders — The borders of the cell. - `bottom` Border — A border along a cell. - … - `right` Border — A border along a cell. - … - `top` Border — A border along a cell. - … - `left` Border — A border along a cell. - … - `numberFormat` NumberFormat — The number format of a cell. - `type` 'NUMBER_FORMAT_TYPE_UNSPECIFIED' | 'TEXT' | 'NUMBER' | 'PERCENT' | 'CURRENCY' | 'DATE' | 'TIME' | 'DATE_TIME' | 'SCIENTIFIC' — The type of the number format. When writing, this field must be set. - `pattern` string — Pattern string used for formatting. If not set, a default pattern based on the spreadsheet's locale will be used if necessary for the given type. See the [Date and Number Formats guide](https://developers.google.com/workspace/sheets/api/guides/formats) for more information about the supported patterns. - `padding` Padding — The amount of padding around the cell, in pixels. When updating padding, every field must be specified. - `top` integer — The top padding of the cell. - `left` integer — The left padding of the cell. - `bottom` integer — The bottom padding of the cell. - `right` integer — The right padding of the cell. - `horizontalAlignment` 'HORIZONTAL_ALIGN_UNSPECIFIED' | 'LEFT' | 'CENTER' | 'RIGHT' — The horizontal alignment of the value in the cell. - `textRotation` TextRotation — The rotation applied to text in a cell. - `vertical` boolean — If true, text reads top to bottom, but the orientation of individual characters is unchanged. For example: | V | | e | | r | | t | | i | | c | | a | | l | - `angle` integer — The angle between the standard orientation and the desired orientation. Measured in degrees. Valid values are between -90 and 90. Positive angles are angled upwards, negative are angled downwards. Note: For LTR text direction positive angles are in the counterclockwise direction, whereas for RTL they are in the clockwise direction - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `verticalAlignment` 'VERTICAL_ALIGN_UNSPECIFIED' | 'TOP' | 'MIDDLE' | 'BOTTOM' — The vertical alignment of the value in the cell. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - `bold` boolean — True if the text is bold. - `fontFamily` string — The font family. - `italic` boolean — True if the text is italicized. - `fontSize` integer — The size of the font. - `foregroundColorStyle` ColorStyle — A color value. - … - `strikethrough` boolean — True if the text has a strikethrough. - `underline` boolean — True if the text is underlined. - `link` Link — An external or local reference. - … - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `hyperlinkDisplayType` 'HYPERLINK_DISPLAY_TYPE_UNSPECIFIED' | 'LINKED' | 'PLAIN_TEXT' — If one exists, how a hyperlink should be displayed in the cell. - `wrapStrategy` 'WRAP_STRATEGY_UNSPECIFIED' | 'OVERFLOW_CELL' | 'LEGACY_WRAP' | 'CLIP' | 'WRAP' — The wrap strategy for the value in the cell. - `backgroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `textDirection` 'TEXT_DIRECTION_UNSPECIFIED' | 'LEFT_TO_RIGHT' | 'RIGHT_TO_LEFT' — The direction of the text in the cell. - `importFunctionsExternalUrlAccessAllowed` boolean — Whether to allow external URL access for image and import functions. Read only when true. When false, you can set to true. This value will be bypassed and always return true if the admin has enabled the [allowlisting feature](https://support.google.com/a?p=url_allowlist). - `iterativeCalculationSettings` IterativeCalculationSettings — Settings to control how circular dependencies are resolved with iterative calculation. - `convergenceThreshold` number, double — When iterative calculation is enabled and successive results differ by less than this threshold value, the calculation rounds stop. - `maxIterations` integer — When iterative calculation is enabled, the maximum number of calculation rounds to perform. - `spreadsheetTheme` SpreadsheetTheme — Represents spreadsheet theme - `themeColors` ThemeColorPair[] — The spreadsheet theme color pairs. To update you must provide all theme color pairs. - `color` ColorStyle — A color value. - … - `colorType` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — The type of the spreadsheet theme color. - `primaryFontFamily` string — Name of the primary font family. - `fields` string, google-fieldmask — The fields that should be updated. At least one field must be specified. The root 'properties' is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `addNamedRange` AddNamedRangeRequest — Adds a named range to the spreadsheet. - `namedRange` NamedRange — A named range. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `namedRangeId` string — The ID of the named range. - `name` string — The name of the named range. - `randomizeRange` RandomizeRangeRequest — Randomizes the order of the rows in a range. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `setBasicFilter` SetBasicFilterRequest — Sets the basic filter associated with a sheet. - `filter` BasicFilter — The default filter associated with a sheet. For more information, see [Manage data visibility with filters](https://developers.google.com/workspace/sheets/api/guides/filters). - `filterSpecs` FilterSpec[] — The filter criteria per column. Both criteria and filter_specs are populated in responses. If both fields are specified in an update request, this field takes precedence. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - `name` string — The display name of the column. It should be unique within a data source. - `filterCriteria` FilterCriteria — Criteria for showing or hiding rows in a filter or filter view. - `visibleBackgroundColorStyle` ColorStyle — A color value. - … - `visibleBackgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `visibleForegroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `hiddenValues` string[] — Values that should be hidden. - `visibleForegroundColorStyle` ColorStyle — A color value. - … - `condition` BooleanCondition — A condition that can evaluate to true or false. BooleanConditions are used by conditional formatting, data validation, and the criteria in filters. - … - `columnIndex` integer — The zero-based column index. - `sortSpecs` SortSpec[] — The sort order per column. Later specifications are used when values are equal in the earlier specifications. - `backgroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `dimensionIndex` integer — The dimension the sort should be applied to. - `foregroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - `name` string — The display name of the column. It should be unique within a data source. - `sortOrder` 'SORT_ORDER_UNSPECIFIED' | 'ASCENDING' | 'DESCENDING' — The order data should be sorted. - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `tableId` string — The table this filter is backed by, if any. When writing, only one of range or table_id may be set. - `criteria` object — The criteria for showing/hiding values per column. The map's key is the column index, and the value is the criteria for that column. This field is deprecated in favor of filter_specs. - `updateTable` UpdateTableRequest — Updates a table in the spreadsheet. - `fields` string, google-fieldmask — Required. The fields that should be updated. At least one field must be specified. The root `table` is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `table` Table — A table. - `tableId` string — The id of the table. - `range` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `rowsProperties` TableRowsProperties — The table row properties. - `headerColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `firstBandColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `secondBandColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `footerColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `name` string — The table name. This is unique to all tables in the same spreadsheet. - `columnProperties` TableColumnProperties[] — The table column properties. - `columnIndex` integer — The 0-based column index. This index is relative to its position in the table and is not necessarily the same as the column index in the sheet. - `columnName` string — The column name. - `columnType` 'COLUMN_TYPE_UNSPECIFIED' | 'DOUBLE' | 'CURRENCY' | 'PERCENT' | 'DATE' | 'TIME' | 'DATE_TIME' | 'TEXT' | 'BOOLEAN' | 'DROPDOWN' | 'FILES_CHIP' | 'PEOPLE_CHIP' | 'FINANCE_CHIP' | 'PLACE_CHIP' | 'RATINGS_CHIP' — The column type. - `dataValidationRule` TableColumnDataValidationRule — A data validation rule for a column in a table. - `condition` BooleanCondition — A condition that can evaluate to true or false. BooleanConditions are used by conditional formatting, data validation, and the criteria in filters. - … - `autoResizeDimensions` AutoResizeDimensionsRequest — Automatically resizes one or more dimensions based on the contents of the cells in that dimension. - `dimensions` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - `sheetId` integer — The sheet this span is on. - `startIndex` integer — The start (inclusive) of the span, or not set if unbounded. - `dimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension of the span. - `endIndex` integer — The end (exclusive) of the span, or not set if unbounded. - `dataSourceSheetDimensions` DataSourceSheetDimensionRange — A range along a single dimension on a DATA_SOURCE sheet. - `sheetId` integer — The ID of the data source sheet the range is on. - `columnReferences` DataSourceColumnReference[] — The columns on the data source sheet. - `name` string — The display name of the column. It should be unique within a data source. - `updateDeveloperMetadata` UpdateDeveloperMetadataRequest — A request to update properties of developer metadata. Updates the properties of the developer metadata selected by the filters to the values provided in the DeveloperMetadata resource. Callers must specify the properties they wish to update in the fields parameter, as well as specify at least one DataFilter matching the metadata they wish to update. - `dataFilters` DataFilter[] — The filters matching the developer metadata entries to update. - `a1Range` string — Selects data that matches the specified A1 range. - `gridRange` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `developerMetadataLookup` DeveloperMetadataLookup — Selects DeveloperMetadata that matches all of the specified fields. For example, if only a metadata ID is specified this considers the DeveloperMetadata with that particular unique ID. If a metadata key is specified, this considers all developer metadata with that key. If a key, visibility, and location type are all specified, this considers all developer metadata with that key and visibility that are associated with a location of that type. In general, this selects all DeveloperMetadata that match the intersection of all the specified fields; any field or combination of fields may be specified. - `locationType` 'DEVELOPER_METADATA_LOCATION_TYPE_UNSPECIFIED' | 'ROW' | 'COLUMN' | 'SHEET' | 'SPREADSHEET' — Limits the selected developer metadata to those entries which are associated with locations of the specified type. For example, when this field is specified as ROW this lookup only considers developer metadata associated on rows. If the field is left unspecified, all location types are considered. This field cannot be specified as SPREADSHEET when the locationMatchingStrategy is specified as INTERSECTING or when the metadataLocation is specified as a non-spreadsheet location. Spreadsheet metadata cannot intersect any other developer metadata location. This field also must be left unspecified when the locationMatchingStrategy is specified as EXACT. - `metadataKey` string — Limits the selected developer metadata to that which has a matching DeveloperMetadata.metadata_key. - `metadataValue` string — Limits the selected developer metadata to that which has a matching DeveloperMetadata.metadata_value. - `visibility` 'DEVELOPER_METADATA_VISIBILITY_UNSPECIFIED' | 'DOCUMENT' | 'PROJECT' — Limits the selected developer metadata to that which has a matching DeveloperMetadata.visibility. If left unspecified, all developer metadata visible to the requesting project is considered. - `locationMatchingStrategy` 'DEVELOPER_METADATA_LOCATION_MATCHING_STRATEGY_UNSPECIFIED' | 'EXACT_LOCATION' | 'INTERSECTING_LOCATION' — Determines how this lookup matches the location. If this field is specified as EXACT, only developer metadata associated on the exact location specified is matched. If this field is specified to INTERSECTING, developer metadata associated on intersecting locations is also matched. If left unspecified, this field assumes a default value of INTERSECTING. If this field is specified, a metadataLocation must also be specified. - `metadataId` integer — Limits the selected developer metadata to that which has a matching DeveloperMetadata.metadata_id. - `metadataLocation` DeveloperMetadataLocation — A location where metadata may be associated in a spreadsheet. - `sheetId` integer — The ID of the sheet when metadata is associated with an entire sheet. - `spreadsheet` boolean — True when metadata is associated with an entire spreadsheet. - `dimensionRange` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - … - `locationType` 'DEVELOPER_METADATA_LOCATION_TYPE_UNSPECIFIED' | 'ROW' | 'COLUMN' | 'SHEET' | 'SPREADSHEET' — The type of location this object represents. This field is read-only. - `developerMetadata` DeveloperMetadata — Developer metadata associated with a location or object in a spreadsheet. For more information, see [Read, write, and search metadata](https://developers.google.com/workspace/sheets/api/guides/metadata). Developer metadata may be used to associate arbitrary data with various parts of a spreadsheet and it will remain associated at those locations as they move around and the spreadsheet is edited. For example, if developer metadata is associated with row 5 and another row is then subsequently inserted above row 5, that original metadata is still associated with the row it was first associated with (what is now row 6). If the associated object is deleted then its metadata is deleted too. - `metadataKey` string — The metadata key. There may be multiple metadata in a spreadsheet with the same key. Developer metadata must always have a key specified. - `metadataValue` string — Data associated with the metadata's key. - `location` DeveloperMetadataLocation — A location where metadata may be associated in a spreadsheet. - `sheetId` integer — The ID of the sheet when metadata is associated with an entire sheet. - `spreadsheet` boolean — True when metadata is associated with an entire spreadsheet. - `dimensionRange` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - `sheetId` integer — The sheet this span is on. - `startIndex` integer — The start (inclusive) of the span, or not set if unbounded. - `dimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension of the span. - `endIndex` integer — The end (exclusive) of the span, or not set if unbounded. - `locationType` 'DEVELOPER_METADATA_LOCATION_TYPE_UNSPECIFIED' | 'ROW' | 'COLUMN' | 'SHEET' | 'SPREADSHEET' — The type of location this object represents. This field is read-only. - `visibility` 'DEVELOPER_METADATA_VISIBILITY_UNSPECIFIED' | 'DOCUMENT' | 'PROJECT' — The metadata visibility. Developer metadata must always have visibility specified. - `metadataId` integer — The spreadsheet-scoped unique ID that identifies the metadata. IDs may be specified when metadata is created, otherwise one will be randomly generated and assigned. Must be positive. - `fields` string, google-fieldmask — The fields that should be updated. At least one field must be specified. The root `developerMetadata` is implied and should not be specified. A single `"*"` can be used as short-hand for listing every field. - `deleteBanding` DeleteBandingRequest — Removes the banded range with the given ID from the spreadsheet. - `bandedRangeId` integer — The ID of the banded range to delete. - `createDeveloperMetadata` CreateDeveloperMetadataRequest — A request to create developer metadata. - `developerMetadata` DeveloperMetadata — Developer metadata associated with a location or object in a spreadsheet. For more information, see [Read, write, and search metadata](https://developers.google.com/workspace/sheets/api/guides/metadata). Developer metadata may be used to associate arbitrary data with various parts of a spreadsheet and it will remain associated at those locations as they move around and the spreadsheet is edited. For example, if developer metadata is associated with row 5 and another row is then subsequently inserted above row 5, that original metadata is still associated with the row it was first associated with (what is now row 6). If the associated object is deleted then its metadata is deleted too. - `metadataKey` string — The metadata key. There may be multiple metadata in a spreadsheet with the same key. Developer metadata must always have a key specified. - `metadataValue` string — Data associated with the metadata's key. - `location` DeveloperMetadataLocation — A location where metadata may be associated in a spreadsheet. - `sheetId` integer — The ID of the sheet when metadata is associated with an entire sheet. - `spreadsheet` boolean — True when metadata is associated with an entire spreadsheet. - `dimensionRange` DimensionRange — A range along a single dimension on a sheet. All indexes are zero-based. Indexes are half open: the start index is inclusive and the end index is exclusive. Missing indexes indicate the range is unbounded on that side. - `sheetId` integer — The sheet this span is on. - `startIndex` integer — The start (inclusive) of the span, or not set if unbounded. - `dimension` 'DIMENSION_UNSPECIFIED' | 'ROWS' | 'COLUMNS' — The dimension of the span. - `endIndex` integer — The end (exclusive) of the span, or not set if unbounded. - `locationType` 'DEVELOPER_METADATA_LOCATION_TYPE_UNSPECIFIED' | 'ROW' | 'COLUMN' | 'SHEET' | 'SPREADSHEET' — The type of location this object represents. This field is read-only. - `visibility` 'DEVELOPER_METADATA_VISIBILITY_UNSPECIFIED' | 'DOCUMENT' | 'PROJECT' — The metadata visibility. Developer metadata must always have visibility specified. - `metadataId` integer — The spreadsheet-scoped unique ID that identifies the metadata. IDs may be specified when metadata is created, otherwise one will be randomly generated and assigned. Must be positive. - `cutPaste` CutPasteRequest — Moves data from the source to the destination. - `source` GridRange — A range on a sheet. All indexes are zero-based. Indexes are half open, i.e. the start index is inclusive and the end index is exclusive -- [start_index, end_index). Missing indexes indicate the range is unbounded on that side. For example, if `"Sheet1"` is sheet ID 123456, then: `Sheet1!A1:A1 == sheet_id: 123456, start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index: 1` `Sheet1!A3:B4 == sheet_id: 123456, start_row_index: 2, end_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 123456, start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 123456, start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 == sheet_id: 123456` The start index must always be less than or equal to the end index. If the start index equals the end index, then the range is empty. Empty ranges are typically not meaningful and are usually rendered in the UI as `#REF!`. - `endRowIndex` integer — The end row (exclusive) of the range, or not set if unbounded. - `sheetId` integer — The sheet this range is on. - `endColumnIndex` integer — The end column (exclusive) of the range, or not set if unbounded. - `startRowIndex` integer — The start row (inclusive) of the range, or not set if unbounded. - `startColumnIndex` integer — The start column (inclusive) of the range, or not set if unbounded. - `destination` GridCoordinate — A coordinate in a sheet. All indexes are zero-based. - `sheetId` integer — The sheet this coordinate is on. - `rowIndex` integer — The row index of the coordinate. - `columnIndex` integer — The column index of the coordinate. - `pasteType` 'PASTE_NORMAL' | 'PASTE_VALUES' | 'PASTE_FORMAT' | 'PASTE_NO_BORDERS' | 'PASTE_FORMULA' | 'PASTE_DATA_VALIDATION' | 'PASTE_CONDITIONAL_FORMATTING' — What kind of data to paste. All the source data will be cut, regardless of what is pasted. - `updateChartSpec` UpdateChartSpecRequest — Updates a chart's specifications. (This does not move or resize a chart. To move or resize a chart, use UpdateEmbeddedObjectPositionRequest.) - `spec` ChartSpec — The specifications of a chart. - `titleTextPosition` TextPosition — Position settings for text. - `horizontalAlignment` 'HORIZONTAL_ALIGN_UNSPECIFIED' | 'LEFT' | 'CENTER' | 'RIGHT' — Horizontal alignment setting for the piece of text. - `subtitle` string — The subtitle of the chart. - `subtitleTextPosition` TextPosition — Position settings for text. - `horizontalAlignment` 'HORIZONTAL_ALIGN_UNSPECIFIED' | 'LEFT' | 'CENTER' | 'RIGHT' — Horizontal alignment setting for the piece of text. - `waterfallChart` WaterfallChartSpec — A waterfall chart. - `series` WaterfallChartSeries[] — The data this waterfall chart is visualizing. - `hideTrailingSubtotal` boolean — True to hide the subtotal column from the end of the series. By default, a subtotal column will appear at the end of each series. Setting this field to true will hide that subtotal column for this series. - `positiveColumnsStyle` WaterfallChartColumnStyle — Styles for a waterfall chart column. - … - `negativeColumnsStyle` WaterfallChartColumnStyle — Styles for a waterfall chart column. - … - `subtotalColumnsStyle` WaterfallChartColumnStyle — Styles for a waterfall chart column. - … - `customSubtotals` WaterfallChartCustomSubtotal[] — Custom subtotal columns appearing in this series. The order in which subtotals are defined is not significant. Only one subtotal may be defined for each data point. - … - `data` ChartData — The data included in a domain or series. - … - `dataLabel` DataLabel — Settings for one set of data labels. Data labels are annotations that appear next to a set of data, such as the points on a line chart, and provide additional information about what the data represents, such as a text representation of the value behind that point on the graph. - … - `stackedType` 'WATERFALL_STACKED_TYPE_UNSPECIFIED' | 'STACKED' | 'SEQUENTIAL' — The stacked type. - `hideConnectorLines` boolean — True to hide connector lines between columns. - `totalDataLabel` DataLabel — Settings for one set of data labels. Data labels are annotations that appear next to a set of data, such as the points on a line chart, and provide additional information about what the data represents, such as a text representation of the value behind that point on the graph. - `placement` 'DATA_LABEL_PLACEMENT_UNSPECIFIED' | 'CENTER' | 'LEFT' | 'RIGHT' | 'ABOVE' | 'BELOW' | 'INSIDE_END' | 'INSIDE_BASE' | 'OUTSIDE_END' — The placement of the data label relative to the labeled data. - `type` 'DATA_LABEL_TYPE_UNSPECIFIED' | 'NONE' | 'DATA' | 'CUSTOM' — The type of the data label. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - … - `customLabelData` ChartData — The data included in a domain or series. - … - `firstValueIsTotal` boolean — True to interpret the first value as a total. - `connectorLineStyle` LineStyle — Properties that describe the style of a line. - `width` integer — The thickness of the line, in px. - `type` 'LINE_DASH_TYPE_UNSPECIFIED' | 'INVISIBLE' | 'CUSTOM' | 'SOLID' | 'DOTTED' | 'MEDIUM_DASHED' | 'MEDIUM_DASHED_DOTTED' | 'LONG_DASHED' | 'LONG_DASHED_DOTTED' — The dash type of the line. - `domain` WaterfallChartDomain — The domain of a waterfall chart. - `data` ChartData — The data included in a domain or series. - … - `reversed` boolean — True to reverse the order of the domain values (horizontal axis). - `treemapChart` TreemapChartSpec — A Treemap chart. - `colorData` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `parentLabels` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `levels` integer — The number of data levels to show on the treemap chart. These levels are interactive and are shown with their labels. Defaults to 2 if not specified. - `sizeData` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `minValue` number, double — The minimum possible data value. Cells with values less than this will have the same color as cells with this value. If not specified, defaults to the actual minimum value from color_data, or the minimum value from size_data if color_data is not specified. - `hideTooltips` boolean — True to hide tooltips. - `headerColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `headerColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - `bold` boolean — True if the text is bold. - `fontFamily` string — The font family. - `italic` boolean — True if the text is italicized. - `fontSize` integer — The size of the font. - `foregroundColorStyle` ColorStyle — A color value. - … - `strikethrough` boolean — True if the text has a strikethrough. - `underline` boolean — True if the text is underlined. - `link` Link — An external or local reference. - … - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `hintedLevels` integer — The number of additional data levels beyond the labeled levels to be shown on the treemap chart. These levels are not interactive and are shown without their labels. Defaults to 0 if not specified. - `colorScale` TreemapChartColorScale — A color scale for a treemap chart. - `midValueColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `noDataColorStyle` ColorStyle — A color value. - … - `minValueColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `noDataColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `midValueColorStyle` ColorStyle — A color value. - … - `maxValueColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `maxValueColorStyle` ColorStyle — A color value. - … - `minValueColorStyle` ColorStyle — A color value. - … - `maxValue` number, double — The maximum possible data value. Cells with values greater than this will have the same color as cells with this value. If not specified, defaults to the actual maximum value from color_data, or the maximum value from size_data if color_data is not specified. - `labels` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `scorecardChart` ScorecardChartSpec — A scorecard chart. Scorecard charts are used to highlight key performance indicators, known as KPIs, on the spreadsheet. A scorecard chart can represent things like total sales, average cost, or a top selling item. You can specify a single data value, or aggregate over a range of data. Percentage or absolute difference from a baseline value can be highlighted, like changes over time. - `keyValueData` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `customFormatOptions` ChartCustomNumberFormatOptions — Custom number formatting options for chart attributes. - `prefix` string — Custom prefix to be prepended to the chart attribute. This field is optional. - `suffix` string — Custom suffix to be appended to the chart attribute. This field is optional. - `baselineValueData` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `numberFormatSource` 'CHART_NUMBER_FORMAT_SOURCE_UNDEFINED' | 'FROM_DATA' | 'CUSTOM' — The number format source used in the scorecard chart. This field is optional. - `keyValueFormat` KeyValueFormat — Formatting options for key value. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - … - `position` TextPosition — Position settings for text. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for key and baseline chart data in scorecard chart. This field is not supported for data source charts. Use the ChartData.aggregateType field of the key_value_data or baseline_value_data instead for data source charts. This field is optional. - `scaleFactor` number, double — Value to scale scorecard key and baseline value. For example, a factor of 10 can be used to divide all values in the chart by 10. This field is optional. - `baselineValueFormat` BaselineValueFormat — Formatting options for baseline value. - `comparisonType` 'COMPARISON_TYPE_UNDEFINED' | 'ABSOLUTE_DIFFERENCE' | 'PERCENTAGE_DIFFERENCE' — The comparison type of key value with baseline value. - `positiveColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `positiveColorStyle` ColorStyle — A color value. - … - `position` TextPosition — Position settings for text. - … - `negativeColorStyle` ColorStyle — A color value. - … - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - … - `description` string — Description which is appended after the baseline value. This field is optional. - `negativeColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `histogramChart` HistogramChartSpec — A histogram chart. A histogram chart groups data items into bins, displaying each bin as a column of stacked items. Histograms are used to display the distribution of a dataset. Each column of items represents a range into which those items fall. The number of bins can be chosen automatically or specified explicitly. - `legendPosition` 'HISTOGRAM_CHART_LEGEND_POSITION_UNSPECIFIED' | 'BOTTOM_LEGEND' | 'LEFT_LEGEND' | 'RIGHT_LEGEND' | 'TOP_LEGEND' | 'NO_LEGEND' | 'INSIDE_LEGEND' — The position of the chart legend. - `bucketSize` number, double — By default the bucket size (the range of values stacked in a single column) is chosen automatically, but it may be overridden here. E.g., A bucket size of 1.5 results in buckets from 0 - 1.5, 1.5 - 3.0, etc. Cannot be negative. This field is optional. - `outlierPercentile` number, double — The outlier percentile is used to ensure that outliers do not adversely affect the calculation of bucket sizes. For example, setting an outlier percentile of 0.05 indicates that the top and bottom 5% of values when calculating buckets. The values are still included in the chart, they will be added to the first or last buckets instead of their own buckets. Must be between 0.0 and 0.5. - `series` HistogramSeries[] — The series for a histogram may be either a single series of values to be bucketed or multiple series, each of the same length, containing the name of the series followed by the values to be bucketed for that series. - `barColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `barColorStyle` ColorStyle — A color value. - … - `data` ChartData — The data included in a domain or series. - … - `showItemDividers` boolean — Whether horizontal divider lines should be displayed between items in each column. - `dataSourceChartProperties` DataSourceChartProperties — Properties of a data source chart. - `dataSourceId` string — ID of the data source that the chart is associated with. - `dataExecutionStatus` DataExecutionStatus — The data execution status. A data execution is created to sync a data source object with the latest data from a DataSource. It is usually scheduled to run at background, you can check its state to tell if an execution completes There are several scenarios where a data execution is triggered to run: * Adding a data source creates an associated data source sheet as well as a data execution to sync the data from the data source to the sheet. * Updating a data source creates a data execution to refresh the associated data source sheet similarly. * You can send refresh request to explicitly refresh one or multiple data source objects. - `errorCode` 'DATA_EXECUTION_ERROR_CODE_UNSPECIFIED' | 'TIMED_OUT' | 'TOO_MANY_ROWS' | 'TOO_MANY_COLUMNS' | 'TOO_MANY_CELLS' | 'ENGINE' | 'PARAMETER_INVALID' | 'UNSUPPORTED_DATA_TYPE' | 'DUPLICATE_COLUMN_NAMES' | 'INTERRUPTED' | 'CONCURRENT_QUERY' | 'OTHER' | 'TOO_MANY_CHARS_PER_CELL' | 'DATA_NOT_FOUND' | 'PERMISSION_DENIED' | 'MISSING_COLUMN_ALIAS' | 'OBJECT_NOT_FOUND' | 'OBJECT_IN_ERROR_STATE' | 'OBJECT_SPEC_INVALID' | 'DATA_EXECUTION_CANCELLED' — The error code. - `errorMessage` string — The error message, which may be empty. - `state` 'DATA_EXECUTION_STATE_UNSPECIFIED' | 'NOT_STARTED' | 'RUNNING' | 'CANCELLING' | 'SUCCEEDED' | 'FAILED' — The state of the data execution. - `lastRefreshTime` string, google-datetime — Gets the time the data last successfully refreshed. - `subtitleTextFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - `bold` boolean — True if the text is bold. - `fontFamily` string — The font family. - `italic` boolean — True if the text is italicized. - `fontSize` integer — The size of the font. - `foregroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `strikethrough` boolean — True if the text has a strikethrough. - `underline` boolean — True if the text is underlined. - `link` Link — An external or local reference. - `uri` string — The link identifier. - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `fontName` string — The name of the font to use by default for all chart text (e.g. title, axis labels, legend). If a font is specified for a specific part of the chart it will override this font name. - `sortSpecs` SortSpec[] — The order to sort the chart data by. Only a single sort spec is supported. Only supported for data source charts. - `backgroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `dimensionIndex` integer — The dimension the sort should be applied to. - `foregroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - `name` string — The display name of the column. It should be unique within a data source. - `sortOrder` 'SORT_ORDER_UNSPECIFIED' | 'ASCENDING' | 'DESCENDING' — The order data should be sorted. - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `altText` string — The alternative text that describes the chart. This is often used for accessibility. - `bubbleChart` BubbleChartSpec — A bubble chart. - `bubbleMinRadiusSize` integer — The minimum radius size of the bubbles, in pixels. If specific, the field must be a positive value. - `bubbleTextStyle` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - `bold` boolean — True if the text is bold. - `fontFamily` string — The font family. - `italic` boolean — True if the text is italicized. - `fontSize` integer — The size of the font. - `foregroundColorStyle` ColorStyle — A color value. - … - `strikethrough` boolean — True if the text has a strikethrough. - `underline` boolean — True if the text is underlined. - `link` Link — An external or local reference. - … - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `bubbleSizes` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `bubbleMaxRadiusSize` integer — The max radius size of the bubbles, in pixels. If specified, the field must be a positive value. - `bubbleOpacity` number, float — The opacity of the bubbles between 0 and 1.0. 0 is fully transparent and 1 is fully opaque. - `bubbleBorderColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `bubbleBorderColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `groupIds` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `series` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `bubbleLabels` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `domain` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `legendPosition` 'BUBBLE_CHART_LEGEND_POSITION_UNSPECIFIED' | 'BOTTOM_LEGEND' | 'LEFT_LEGEND' | 'RIGHT_LEGEND' | 'TOP_LEGEND' | 'NO_LEGEND' | 'INSIDE_LEGEND' — Where the legend of the chart should be drawn. - `orgChart` OrgChartSpec — An org chart. Org charts require a unique set of labels in labels and may optionally include parent_labels and tooltips. parent_labels contain, for each node, the label identifying the parent node. tooltips contain, for each node, an optional tooltip. For example, to describe an OrgChart with Alice as the CEO, Bob as the President (reporting to Alice) and Cathy as VP of Sales (also reporting to Alice), have labels contain "Alice", "Bob", "Cathy", parent_labels contain "", "Alice", "Alice" and tooltips contain "CEO", "President", "VP Sales". - `nodeColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `parentLabels` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `nodeColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `selectedNodeColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `labels` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `tooltips` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `nodeSize` 'ORG_CHART_LABEL_SIZE_UNSPECIFIED' | 'SMALL' | 'MEDIUM' | 'LARGE' — The size of the org chart nodes. - `selectedNodeColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `title` string — The title of the chart. - `maximized` boolean — True to make a chart fill the entire space in which it's rendered with minimum padding. False to use the default padding. (Not applicable to Geo and Org charts.) - `filterSpecs` FilterSpec[] — The filters applied to the source data of the chart. Only supported for data source charts. - `dataSourceColumnReference` DataSourceColumnReference — An unique identifier that references a data source column. - `name` string — The display name of the column. It should be unique within a data source. - `filterCriteria` FilterCriteria — Criteria for showing or hiding rows in a filter or filter view. - `visibleBackgroundColorStyle` ColorStyle — A color value. - … - `visibleBackgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `visibleForegroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `hiddenValues` string[] — Values that should be hidden. - `visibleForegroundColorStyle` ColorStyle — A color value. - … - `condition` BooleanCondition — A condition that can evaluate to true or false. BooleanConditions are used by conditional formatting, data validation, and the criteria in filters. - … - `columnIndex` integer — The zero-based column index. - `basicChart` BasicChartSpec — The specification for a basic chart. See BasicChartType for the list of charts this supports. - `interpolateNulls` boolean — If some values in a series are missing, gaps may appear in the chart (e.g, segments of lines in a line chart will be missing). To eliminate these gaps set this to true. Applies to Line, Area, and Combo charts. - `threeDimensional` boolean — True to make the chart 3D. Applies to Bar and Column charts. - `compareMode` 'BASIC_CHART_COMPARE_MODE_UNSPECIFIED' | 'DATUM' | 'CATEGORY' — The behavior of tooltips and data highlighting when hovering on data and chart area. - `headerCount` integer — The number of rows or columns in the data that are "headers". If not set, Google Sheets will guess how many rows are headers based on the data. (Note that BasicChartAxis.title may override the axis title inferred from the header values.) - `legendPosition` 'BASIC_CHART_LEGEND_POSITION_UNSPECIFIED' | 'BOTTOM_LEGEND' | 'LEFT_LEGEND' | 'RIGHT_LEGEND' | 'TOP_LEGEND' | 'NO_LEGEND' — The position of the chart legend. - `domains` BasicChartDomain[] — The domain of data this is charting. Only a single domain is supported. - `domain` ChartData — The data included in a domain or series. - … - `reversed` boolean — True to reverse the order of the domain values (horizontal axis). - `lineSmoothing` boolean — Gets whether all lines should be rendered smooth or straight by default. Applies to Line charts. - `chartType` 'BASIC_CHART_TYPE_UNSPECIFIED' | 'BAR' | 'LINE' | 'AREA' | 'COLUMN' | 'SCATTER' | 'COMBO' | 'STEPPED_AREA' — The type of the chart. - `axis` BasicChartAxis[] — The axis on the chart. - `format` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - … - `title` string — The title of this axis. If set, this overrides any title inferred from headers of the data. - `viewWindowOptions` ChartAxisViewWindowOptions — The options that define a "view window" for a chart (such as the visible values in an axis). - … - `position` 'BASIC_CHART_AXIS_POSITION_UNSPECIFIED' | 'BOTTOM_AXIS' | 'LEFT_AXIS' | 'RIGHT_AXIS' — The position of this axis. - `titleTextPosition` TextPosition — Position settings for text. - … - `totalDataLabel` DataLabel — Settings for one set of data labels. Data labels are annotations that appear next to a set of data, such as the points on a line chart, and provide additional information about what the data represents, such as a text representation of the value behind that point on the graph. - `placement` 'DATA_LABEL_PLACEMENT_UNSPECIFIED' | 'CENTER' | 'LEFT' | 'RIGHT' | 'ABOVE' | 'BELOW' | 'INSIDE_END' | 'INSIDE_BASE' | 'OUTSIDE_END' — The placement of the data label relative to the labeled data. - `type` 'DATA_LABEL_TYPE_UNSPECIFIED' | 'NONE' | 'DATA' | 'CUSTOM' — The type of the data label. - `textFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - … - `customLabelData` ChartData — The data included in a domain or series. - … - `series` BasicChartSeries[] — The data this chart is visualizing. - `dataLabel` DataLabel — Settings for one set of data labels. Data labels are annotations that appear next to a set of data, such as the points on a line chart, and provide additional information about what the data represents, such as a text representation of the value behind that point on the graph. - … - `type` 'BASIC_CHART_TYPE_UNSPECIFIED' | 'BAR' | 'LINE' | 'AREA' | 'COLUMN' | 'SCATTER' | 'COMBO' | 'STEPPED_AREA' — The type of this series. Valid only if the chartType is COMBO. Different types will change the way the series is visualized. Only LINE, AREA, and COLUMN are supported. - `series` ChartData — The data included in a domain or series. - … - `color` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `styleOverrides` BasicSeriesDataPointStyleOverride[] — Style override settings for series data points. - … - `targetAxis` 'BASIC_CHART_AXIS_POSITION_UNSPECIFIED' | 'BOTTOM_AXIS' | 'LEFT_AXIS' | 'RIGHT_AXIS' — The minor axis that will specify the range of values for this series. For example, if charting stocks over time, the "Volume" series may want to be pinned to the right with the prices pinned to the left, because the scale of trading volume is different than the scale of prices. It is an error to specify an axis that isn't a valid minor axis for the chart's type. - `pointStyle` PointStyle — The style of a point on the chart. - … - `colorStyle` ColorStyle — A color value. - … - `lineStyle` LineStyle — Properties that describe the style of a line. - … - `stackedType` 'BASIC_CHART_STACKED_TYPE_UNSPECIFIED' | 'NOT_STACKED' | 'STACKED' | 'PERCENT_STACKED' — The stacked type for charts that support vertical stacking. Applies to Area, Bar, Column, Combo, and Stepped Area charts. - `backgroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `hiddenDimensionStrategy` 'CHART_HIDDEN_DIMENSION_STRATEGY_UNSPECIFIED' | 'SKIP_HIDDEN_ROWS_AND_COLUMNS' | 'SKIP_HIDDEN_ROWS' | 'SKIP_HIDDEN_COLUMNS' | 'SHOW_ALL' — Determines how the charts will use hidden rows or columns. - `backgroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `pieChart` PieChartSpec — A pie chart. - `pieHole` number, double — The size of the hole in the pie chart. - `legendPosition` 'PIE_CHART_LEGEND_POSITION_UNSPECIFIED' | 'BOTTOM_LEGEND' | 'LEFT_LEGEND' | 'RIGHT_LEGEND' | 'TOP_LEGEND' | 'NO_LEGEND' | 'LABELED_LEGEND' — Where the legend of the pie chart should be drawn. - `domain` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `series` ChartData — The data included in a domain or series. - `columnReference` DataSourceColumnReference — An unique identifier that references a data source column. - … - `groupRule` ChartGroupRule — An optional setting on the ChartData of the domain of a data source chart that defines buckets for the values in the domain rather than breaking out each individual value. For example, when plotting a data source chart, you can specify a histogram rule on the domain (it should only contain numeric values), grouping its values into buckets. Any values of a chart series that fall into the same bucket are aggregated based on the aggregate_type. - … - `sourceRange` ChartSourceRange — Source ranges for a chart. - … - `aggregateType` 'CHART_AGGREGATE_TYPE_UNSPECIFIED' | 'AVERAGE' | 'COUNT' | 'MAX' | 'MEDIAN' | 'MIN' | 'SUM' — The aggregation type for the series of a data source chart. Only supported for data source charts. - `threeDimensional` boolean — True if the pie is three dimensional. - `candlestickChart` CandlestickChartSpec — A candlestick chart. - `domain` CandlestickDomain — The domain of a CandlestickChart. - `reversed` boolean — True to reverse the order of the domain values (horizontal axis). - `data` ChartData — The data included in a domain or series. - … - `data` CandlestickData[] — The Candlestick chart data. Only one CandlestickData is supported. - `lowSeries` CandlestickSeries — The series of a CandlestickData. - … - `highSeries` CandlestickSeries — The series of a CandlestickData. - … - `closeSeries` CandlestickSeries — The series of a CandlestickData. - … - `openSeries` CandlestickSeries — The series of a CandlestickData. - … - `titleTextFormat` TextFormat — The format of a run of text in a cell. Absent values indicate that the field isn't specified. - `bold` boolean — True if the text is bold. - `fontFamily` string — The font family. - `italic` boolean — True if the text is italicized. - `fontSize` integer — The size of the font. - `foregroundColorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - … - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `strikethrough` boolean — True if the text has a strikethrough. - `underline` boolean — True if the text is underlined. - `link` Link — An external or local reference. - `uri` string — The link identifier. - `foregroundColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `chartId` integer — The ID of the chart to update. - `deleteTable` DeleteTableRequest — Removes the table with the given ID from the spreadsheet. - `tableId` string — The ID of the table to delete. - `updateBorders` UpdateBordersRequest — Updates the borders of a range. If a field is not set in the request, that means the border remains as-is. For example, with two subsequent UpdateBordersRequest: 1. range: A1:A5 `{ top: RED, bottom: WHITE }` 2. range: A1:A5 `{ left: BLUE }` That would result in A1:A5 having a borders of `{ top: RED, bottom: WHITE, left: BLUE }`. If you want to clear a border, explicitly set the style to NONE. - `innerHorizontal` Border — A border along a cell. - `width` integer — The width of the border, in pixels. Deprecated; the width is determined by the "style" field. - `color` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `colorStyle` ColorStyle — A color value. - `rgbColor` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `themeColor` 'THEME_COLOR_TYPE_UNSPECIFIED' | 'TEXT' | 'BACKGROUND' | 'ACCENT1' | 'ACCENT2' | 'ACCENT3' | 'ACCENT4' | 'ACCENT5' | 'ACCENT6' | 'LINK' — Theme color. - `style` 'STYLE_UNSPECIFIED' | 'DOTTED' | 'DASHED' | 'SOLID' | 'SOLID_MEDIUM' | 'SOLID_THICK' | 'NONE' | 'DOUBLE' — The style of the border. - `right` Border — A border along a cell. - `width` integer — The width of the border, in pixels. Deprecated; the width is determined by the "style" field. - `color` Color — Represents a color in the RGBA color space. This representation is designed for simplicity of conversion to and from color representations in various languages over compactness. For example, the fields of this representation can be trivially provided to the constructor of `java.awt.Color` in Java; it can also be trivially provided to UIColor's `+colorWithRed:green:blue:alpha` method in iOS; and, with just a little work, it can be easily formatted into a CSS `rgba()` string in JavaScript. This reference page doesn't have information about the absolute color space that should be used to interpret the RGB value—for example, sRGB, Adobe RGB, DCI-P3, and BT.2020. By default, applications should assume the sRGB color space. When color equality needs to be decided, implementations, unless documented otherwise, treat two colors as equal if all their red, green, blue, and alpha values each differ by at most `1e-5`. Example (Java): import com.google.type.Color; // ... public static java.awt.Color fromProto(Color protocolor) { float alpha = protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(), alpha); } public static Color toProto(java.awt.Color color) { float red = (float) color.getRed(); float green = (float) color.getGreen(); float blue = (float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator) .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255) { result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) / denominator) .build()); } return resultBuilder.build(); } // ... Example (iOS / Obj-C): // ... static UIColor* fromProto(Color* protocolor) { float red = [protocolor red]; float green = [protocolor green]; float blue = [protocolor blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (alpha_wrapper != nil) { alpha = [alpha_wrapper value]; } return [UIColor colorWithRed:red green:green blue:blue alpha:alpha]; } static Color* toProto(UIColor* color) { CGFloat red, green, blue, alpha; if (![color getRed:&red green:&green blue:&blue alpha:&alpha]) { return nil; } Color* result = [[Color alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:blue]; if (alpha <= 0.9999) { [result setAlpha:floatWrapperWithValue(alpha)]; } [result autorelease]; return result; } // ... Example (JavaScript): // ... var protoToCssColor = function(rgb_color) { var redFrac = rgb_color.red || 0.0; var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0; var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255); var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) { return rgbToCssColor(red, green, blue); } var alphaFrac = rgb_color.alpha.value || 0.0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',', alphaFrac, ')'].join(''); }; var rgbToCssColor = function(red, green, blue) { var rgbNumber = new Number((red << 16) | (green << 8) | blue); var hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length; var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) { resultBuilder.push('0'); } resultBuilder.push(hexString); return resultBuilder.join(''); }; // ... - `red` number, float — The amount of red in the color as a value in the interval [0, 1]. - `green` number, float — The amount of green in the color as a value in the interval [0, 1]. - `alpha` number, float — The fraction of this color that should be applied to the pixel. That is, the final pixel color is defined by the equation: `pixel color = alpha * (this color) + (1.0 - alpha) * (background color)` This means that a value of 1.0 corresponds to a solid color, whereas a value of 0.0 corresponds to a completely transparent color. This uses a wrapper message rather than a simple float scalar so that it is possible to distinguish between a default value and the value being unset. If omitted, this color object is rendered as a solid color (as if the alpha value had been explicitly given a value of 1.0). - `blue` number, float — The amount of blue in the color as a value in the interval [0, 1]. - `colorStyle` ColorStyle — A color value. - … truncated; see the full OpenAPI document linked below ## Response `200` Successful response --- [API](https://skmtc.dev/google/apis/sheets.md) · [All operations](https://skmtc.dev/google/apis/sheets/llms.txt) · [OpenAPI document](https://skmtc-service-production.skmtc.workers.dev/v1/apis/google/sheets/revisions/89de4914a876/schema)