---
title: "GET /udl/sarobservation/{id}"
method: GET
path: "/udl/sarobservation/{id}"
tags: ["Observation"]
---

# GET /udl/sarobservation/{id}

`GET /udl/sarobservation/{id}`

## Request

- Base URL: `https://unifieddatalibrary.com`
- URL: `https://unifieddatalibrary.com/udl/sarobservation/{id}`
- Auth: none declared

Service operation to get a single SAR observations by its unique ID passed as a path parameter.

## Path parameters

- `id` string, required

## Query parameters

- `firstResult` integer
- `maxResults` integer

## Response `200`

OK

- SARObservationFull: Model representation of observation data for SAR based sensor phenomenologies. J2000 is the preferred coordinate frame for all observations, but in some cases observations may be in another frame depending on the provider. Please see the 'Discover' tab in the storefront to confirm coordinate frames by data provider.
  - `id` string: Unique identifier of the record, auto-generated by the system.
  - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
  - `idOnOrbit` string: Unique identifier of the spacecraft hosting the sensor associated with this collection.
  - `satNo` integer: Satellite/Catalog number of the spacecraft hosting the sensor associated with this collection.
  - `origObjectId` string: Optional identifier provided by the source to indicate the onorbit object hosting the sensor associated with this collection. This may be an internal identifier and not necessarily a valid satellite number.
  - `idSensor` string: Unique identifier of the reporting sensor.
  - `origSensorId` string: Optional identifier provided by the source to indicate the sensor for this collection. This may be an internal identifier and not necessarily a valid sensor ID.
  - `externalId` string: Optional ID from external systems. This field has no meaning within UDL and is provided as a convenience for systems that require tracking of an internal system generated ID.
  - `collectionId` string: Optional identifier to indicate the specific collection tasking which produced this observation.
  - `detectionId` string: Identifier of the specific detection within a collection which produced this observation.
  - `collectionStart` string, date-time, required: Collection start time in ISO 8601 UTC format with microsecond precision.
  - `collectionEnd` string, date-time, required: Collection end time in ISO 8601 UTC format with microsecond precision.
  - `centerTime` string, date-time: The datetime at the center point of the collection in ISO 8601 UTC format with microsecond precision.
  - `detectionStart` string, date-time: The detection start time in ISO 8601 UTC format, with microsecond precision.
  - `detectionEnd` string, date-time: The detection end time in ISO 8601 UTC format, with microsecond precision.
  - `dwellTime` number, double: The duration, in seconds, of this detection.
  - `orbitState` string: The orbital direction (ASCENDING, DESCENDING) of the platform during the collection.
  - `sarMode` string, required: Collection mode setting for this collection (e.g. AREA, SPOTLIGHT, STRIP, etc.).
  - `operatingBand` string: Name of the band containing operating frequency for the collection (e.g. C, E, EHF, HF, K, Ka, Ku, L, Q, S, SHF, UNK, UHF, V, VHF, VLF, W, X). See RFBandType for more details and descriptions of each band name.
  - `operatingFreq` number, double: The operating frequency, in Mhz, for the collection.
  - `snr` number, double: Signal to noise ratio, in dB.
  - `txPolarization` string: Transmit polarization e.g. H - (Horizontally Polarized) Perpendicular to Earth's surface, V - (Vertically Polarized) Parallel to Earth's surface, L - (Left Hand Circularly Polarized) Rotating left relative to the earth's surface, R - (Right Hand Circularly Polarized) Rotating right relative to the earth's surface.
  - `rxPolarization` string: Receive polarization e.g. H - (Horizontally Polarized) Perpendicular to Earth's surface, V - (Vertically Polarized) Parallel to Earth's surface, L - (Left Hand Circularly Polarized) Rotating left relative to the earth's surface, R - (Right Hand Circularly Polarized) Rotating right relative to the earth's surface.
  - `grazeAngle` number, double: The graze angle (also referred to as look angle) for the collection in degrees.
  - `incidenceAngle` number, double: The center incidence angle in degrees.
  - `squintAngle` number, double: The squint angle for the collection in degrees.
  - `pulseBandwidth` number, double: The bandwidth frequency of the pulse in Mhz.
  - `pulseDuration` number, double: The duration of a pulse in seconds.
  - `continuousSpotAngle` number, double: Required sweep angle for the continuous spot scene in degrees.
  - `slantRange` number, double: Slant distance from sensor to center point of imaging event in kilometers.
  - `nearRange` number, double: Specifies the closest range, in kilometers, from the flight path to target during the collection.
  - `farRange` number, double: Specifies the farthest range, in kilometers, from the flight path to target during the collection.
  - `swathLength` number, double: The length of the collection as projected on the ground in kilometers.
  - `area` string: Optional geographical region or polygon (lat/lon pairs) of the area surrounding the image event as projected on the ground.
  - `atext` string: Geographical region or polygon (lon/lat pairs), as depicted by the Well-Known Text representation of the geometry/geography, of the image as projected on the ground. WKT reference: https://www.opengeospatial.org/standards/wkt-crs. Ignored if included with a POST or PUT request that also specifies a valid 'area' field.
  - `agjson` string: Geographical region or polygon (lat/lon pairs), as depicted by the GeoJSON representation of the geometry/geography, of the image as projected on the ground. GeoJSON Reference: https://geojson.org/. Ignored if included with a POST or PUT request that also specifies a valid 'area' or 'atext' field.
  - `atype` string: Type of region as projected on the ground (POLYGON, POINT, LINE).
  - `andims` integer: Number of dimensions of the geometry depicted by region.
  - `asrid` integer: Geographical spatial_ref_sys for region.
  - `spacingRange` number, double: The pixel spacing in the range direction measured in meters.
  - `spacingAzimuth` number, double: The pixel spacing in the azimuth direction measured in meters.
  - `looksAzimuth` integer: The number of looks in the azimuth direction.
  - `looksRange` integer: The number of looks in the range direction.
  - `multilookNumber` number, double: Averages the input synthetic aperture radar (SAR) data by looks in range and azimuth to approximate square pixels, mitigates speckle, and reduces SAR tool processing time.
  - `resolutionRange` number, double: The resolution in the range direction measured in meters.
  - `resolutionAzimuth` number, double: The resolution in the azimuth direction measured in meters.
  - `groundResolutionProjection` number, double: Distance between independent measurements, representing the physical dimension that represents a pixel of the image.
  - `obDirection` string: The antenna pointing direction (LEFT, RIGHT).
  - `coordSys` string: The coordinate system used for the sensor velocity and target position vectors for the collection.
  - `targetposx` number, double: The collection target X position in kilometers.
  - `targetposy` number, double: The collection target Y position in kilometers.
  - `targetposz` number, double: The collection target Z position in kilometers.
  - `senalt` number, double: Sensor altitude during collection in kilometers.
  - `senvelx` number, double: Sensor platform X-velocity during collection in kilometers/second.
  - `senvely` number, double: Sensor platform Y-velocity during collection in kilometers/second.
  - `senvelz` number, double: Sensor platform Z-velocity during collection in kilometers/second.
  - `senlatStart` number, double: WGS-84 sensor latitude sub-point at collect start time (collectionStart), represented as -90 to 90 degrees (negative values south of equator).
  - `senlonStart` number, double: WGS-84 sensor longitude sub-point at collect start time (collectionStart), represented as -180 to 180 degrees (negative values west of Prime Meridian).
  - `senlatEnd` number, double: WGS-84 sensor latitude sub-point at collect end time (collectionEnd), represented as -90 to 90 degrees (negative values south of equator).
  - `senlonEnd` number, double: WGS-84 sensor longitude sub-point at collect end time (collectionEnd), represented as -180 to 180 degrees (negative values west of Prime Meridian).
  - `azimuthAngle` number, double: The azimuth angle, in degrees, of the SAR satellite nadir subpoint measured clockwise from true north at the subpoint.
  - `transactionId` string: Optional identifier to track a commercial or marketplace transaction executed to produce this data.
  - `tags` string[]: Optional array of provider/source specific tags for this data, where each element is no longer than 32 characters, used for implementing data owner conditional access controls to restrict access to the data. Should be left null by data providers unless conditional access controls are coordinated with the UDL team.
  - `srcTyps` string[]: Array of UDL record types (e.g. ANALYTICMAGERY, ESID, GROUNDIMAGE, NOTIFICATION, POI, SV, TRACK) that are related to the SAR Observation. See the associated 'srcIds' array for the record UUIDs, positionally corresponding to the record types in this array. The 'srcTyps' and 'srcIds' arrays must match in size.
  - `srcIds` string[]: Array of UUIDs of the UDL data records that are related to the SAR Observation. See the associated 'srcTyps' array for the specific types of data, positionally corresponding to the UUIDs in this array. The 'srcTyps' and 'srcIds' arrays must match in size. See the corresponding srcTyps array element for the data type of the UUID and use the appropriate API operation to retrieve that object (e.g. /udl/sarobservation/{uuid}).
  - `onOrbit` OnorbitFull: Model object representing on-orbit objects or satellites in the system.
    - `idOnOrbit` string: For the public catalog, the idOnOrbit is typically the satellite number as a string, but may be a UUID for analyst or other unknown or untracked satellites, auto-generated by the system.
    - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
    - `satNo` integer, required: Satellite/Catalog number of the target on-orbit object.
    - `commonName` string: Common name of the on-orbit object.
    - `constellation` string: Constellation to which this satellite belongs.
    - `intlDes` string: International Designator, typically of the format YYYYLLLAAA, where YYYY is the launch year, LLL is the sequential launch number of that year, and AAA is an optional launch piece designator for the launch.
    - `launchDate` string, date: Date of launch.
    - `decayDate` string, date-time: Date of decay.
    - `objectType` 'ROCKET BODY' | 'DEBRIS' | 'PAYLOAD' | 'PLATFORM' | 'MANNED' | 'UNKNOWN': Type of on-orbit object: ROCKET BODY, DEBRIS, PAYLOAD, PLATFORM, MANNED, UNKNOWN.
    - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
    - `missionNumber` string: Mission number of the on-orbit object.
    - `category` 'Unknown' | 'On-Orbit' | 'Decayed' | 'Cataloged Without State' | 'Launch Nominal' | 'Analyst Satellite' | 'Cislunar' | 'Lunar' | 'Hyperbolic' | 'Heliocentric' | 'Interplanetary' | 'Lagrangian' | 'Docked': Category of the on-orbit object. (Unknown, On-Orbit, Decayed, Cataloged Without State, Launch Nominal, Analyst Satellite, Cislunar, Lunar, Hyperbolic, Heliocentric, Interplanetary, Lagrangian, Docked).
    - `lifetimeYears` integer: Estimated lifetime of the on-orbit payload, if known.
    - `altName` string: Alternate name of the on-orbit object.
    - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
    - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
    - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
    - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
    - `source` string, required: Source of the data.
    - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
    - `launchSiteId` string: Id of the associated launchSite entity.
    - `entityCollection` object[]: Read-only entity details (only returned/used on detail queries).
      - `idEntity` string: Unique identifier of the record.
      - `name` string, required: Unique entity name.
      - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
      - `terrestrialId` string: Terrestrial identifier of this entity, if applicable.
      - `type` 'AIRCRAFT' | 'BUS' | 'COMM' | 'IR' | 'LASEREMITTER' | 'NAVIGATION' | 'ONORBIT' | 'RFEMITTER' | 'SCIENTIFIC' | 'SENSOR' | 'SITE' | 'VESSEL', required: The type of entity represented by this record (AIRCRAFT, BUS, COMM, IR, LASEREMITTER, NAVIGATION, ONORBIT, RFEMITTER, SCIENTIFIC, SENSOR, SITE, VESSEL).
      - `idLocation` string: Unique identifier of the entity location, if terrestrial/fixed.
      - `countryCode` string: The country code. This value is typically the ISO 3166 Alpha-2 two-character country code, however it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
      - `ownerType` 'Commercial' | 'Government' | 'Academic' | 'Consortium' | 'Other': Type of organization which owns this entity (e.g. Commercial, Government, Academic, Consortium, etc).
      - `taskable` boolean: Boolean indicating if this entity is taskable.
      - `urls` string[]: List of URLs to additional details/documents for this entity.
      - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
      - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
      - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
      - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
      - `source` string, required: Source of the data.
      - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
      - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
      - `location` LocationFull: Model representation of a location, which is a specific fixed point on the earth and is used to denote the locations of fixed sensors, operating units, etc.
        - `idLocation` string: Unique identifier of the location, auto-generated by the system.
        - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
        - `name` string, required: Location name.
        - `countryCode` string: The country code. This value is typically the ISO 3166 Alpha-2 two-character country code, however it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
        - `lat` number, double: WGS84 latitude of the location, in degrees. -90 to 90 degrees (negative values south of equator).
        - `lon` number, double: WGS84 longitude of the location, in degrees. -180 to 180 degrees (negative values west of Prime Meridian).
        - `altitude` number, double: Altitude of the location, in kilometers.
        - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
        - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
        - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
        - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
        - `source` string, required: Source of the data.
        - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
        - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
        - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
      - `idOnOrbit` string: Onorbit identifier if this entity is part of an on-orbit object. For the public catalog, the idOnOrbit is typically the satellite number as a string, but may be a UUID for analyst or other unknown or untracked satellites.
      - `operatingUnit` OperatingunitFull: Model representation of a unit or organization which operates or controls a space-related Entity such as an on-orbit payload, a sensor, etc. A contact may belong to an organization.
        - `idOperatingUnit` string: Unique identifier of the record, auto-generated by the system.
        - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
        - `altOperatingUnitId` string: Unique identifier of the operating unit record from the originating system.
        - `name` string, required: Name of the operating unit.
        - `description` string: Description of the operating unit.
        - `idLocation` string: Unique identifier of the location record for this operating unit.
        - `idContact` string: Unique identifier of the contact for this operating unit.
        - `idOrganization` string: Unique identifier of the organization record for this operating unit.
        - `unitIdentifier` string: An optional identifier for this operating unit that may be composed from items such as the originating organization, allegiance, one-up number, etc.
        - `countryCode` string: The DoD Standard country code designator for the country or political entity to which the operating unit geographic coordinates reside . This field will be set to "OTHR" if the source value does not match a UDL country code value (ISO-3166-ALPHA-2).
        - `altCountryCode` string: Specifies an alternate country code if the data provider code is not part of an official Country Code standard such as ISO-3166 or FIPS. This field will be set to the value provided by the source and should be used for all Queries specifying a Country Code.
        - `wac` string: World Aeronautical Chart identifier for the area in which a designated operating unit is located.
        - `operStatus` string: The Degree to which an operating unit is ready to perform the overall operational mission(s) for which it was organized and equipped. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `condition` string: The physical manner of being or state of existence of the operating unit. A physical condition that must be considered in the determining of a course of action. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `conditionAvail` string: Availability of the operating unit relative to its condition. Indicates the reason the operating unit is not fully operational. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `eval` integer: The Intelligence Confidence Level or the Reliability/degree of confidence that the analyst has assigned to the data within this record. The numerical range is from 1 to 9 with 1 representing the highest confidence level.
        - `fpa` string: Functional Production Area (FPA) under the Shared Production Program (SPP). Producers are defined per country per FPA. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `ident` string: Estimated identity of the Site (ASSUMED FRIEND, FRIEND, HOSTILE, FAKER, JOKER, NEUTRAL, PENDING, SUSPECT, UNKNOWN): ASSUMED FRIEND: Track assumed to be a friend due to the object characteristics, behavior, and/or origin. FRIEND: Track object supporting friendly forces and belonging to a declared friendly nation or entity. HOSTILE: Track object belonging to an opposing nation, party, group, or entity deemed to contribute to a threat to friendly forces or their mission due to its behavior, characteristics, nationality, or origin. FAKER: Friendly track, object, or entity acting as an exercise hostile. JOKER: Friendly track, object, or entity acting as an exercise suspect. NEUTRAL: Track object whose characteristics, behavior, nationality, and/or origin indicate that it is neither supporting nor opposing friendly forces or their mission. PENDING: Track object which has not been evaluated. SUSPECT: Track object deemed potentially hostile due to the object characteristics, behavior, nationality, and/or origin. UNKNOWN: Track object which has been evaluated and does not meet criteria for any standard identity.
        - `allegiance` string: The DoD Standard country code designator for the country or political entity to which the operating unit owes its allegiance. This field will be set to "OTHR" if the source value does not match a UDL country code value (ISO-3166-ALPHA-2).
        - `altAllegiance` string: Specifies an alternate allegiance code if the data provider code is not part of an official Country Code standard such as ISO-3166 or FIPS. This field will be set to the value provided by the source and should be used for all Queries specifying allegiance.
        - `locName` string: Location name for the coordinates.
        - `locReason` string: Indicates the reason that the operating unit is at that location. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `force` string: An aggregation of military units within a single service (i.e., ARMY, AIR FORCE, etc.) which operates under a single authority to accomplish a common mission. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `forceName` string: The specific name for a given force. For example, Force = ADF (Air Defense Force) and Force Name = Army Air Defense Force.
        - `functRole` string: Principal combat-related role that an operating unit is organized, structured and equipped to perform. Or, the specialized military or paramilitary branch in which an individual serves, their specialization. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `msnPrimary` string: Indicates the principal type of mission that an operating unit is organized and equipped to perform. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `msnPrimarySpecialty` string: Indicates the principal specialty type of mission that an operating unit is organized and equipped to perform. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `masterUnit` boolean: This field contains a value indicating whether the record is a master unit record (True) or a detail record (False). Master records contain basic information that does not change over time for each unit that has been selected to be projected.
        - `stylizedUnit` boolean: This field contains a value indicating whether the record is a stylized operating unit record (True) or a regular operating unit record (False). A stylized operating unit is a type of operating unit with one set of equipment that can be assigned to one or more superiors. A stylized operating unit is generally useful for lower echelon operating units where the number of operating units and types of equipment are equal for multiple organizations. In lieu of creating unique operating unit records for each operating unit, a template is created for the operating unit and its equipment. This template enables the user to assign the operating unit to multiple organizations.
        - `divCat` string: Combat status of a divisional or equivalent operating unit. Currently, this data element applies only to operating units of the Former Soviet Union. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `echelon` string: Organizational level of the operating unit. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `echelonTier` string: Indicates the major group or level to which an echelon belongs. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `fleetId` string: Naval fleet to which an operating unit is assigned. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `deployStatus` string: A code describing the amount of operating unit participation in a deployment. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `flagFlown` string: The country code of the observed flag flown.
        - `coordDatum` string: A mathematical model of the earth used to calculate coordinates on a map. US Forces use the World Geodetic System 1984 (WGS 84), but also use maps by allied countries with local datums. The datum must be specified to ensure accuracy of coordinates. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `coord` string: Indicates any of the magnitudes that serve to define the position of a point by reference to a fixed figure, system of lines, etc. Pos. 1-2. Latitude Degrees [00-90] Pos. 3-4. Latitude Minutes [00-59] Pos. 5-6. Latitude Seconds [00-59] Pos. 7-9. Latitude Thousandths Of Seconds [000-999] Pos. 10. Latitude Hemisphere [NS] Pos. 11-13. Longitude Degrees [00-180] Pos. 14-15. Longitude Minutes [00-59] Pos. 16-17. Longitude Seconds [00-59] Pos. 18-20. Longitude Thousandths Of Seconds [000-999] Pos. 21. Longitude Hemisphere [EW] Pos. 1-21. Unknown Latitude and Unknown Longitude [000000000U000000000U]
        - `coordDerivAcc` number, double: Indicates the plus or minus error assessed against the method used to derive the coordinate.
        - `lat` number, double: WGS84 latitude of the location, in degrees. -90 to 90 degrees (negative values south of equator).
        - `lon` number, double: WGS84 longitude of the location, in degrees. -180 to 180 degrees (negative values west of Prime Meridian).
        - `elevMsl` number, double: Ground elevation of the geographic coordinates referenced to (above or below) Mean Sea Level (MSL) vertical datum.
        - `elevMslConfLvl` integer: Indicates the confidence level expressed as a percent that a specific geometric spatial element, ELEVATION_MSL linear accuracy, has been vertically positioned to within a specified vertical accuracy.
        - `elevMslDerivAcc` number, double: Indicates the plus or minus error assessed against the method used to derive the elevation.
        - `geoidalMslSep` number, double: The distance between Mean Sea Level and a referenced ellipsoid.
        - `milGridSys` string: Indicates the grid system used in the development of the milGrid coordinates. Values are: UPS - Universal Polar System UTM - Universal Transverse Mercator
        - `milGrid` string: The Military Grid Reference System is the geocoordinate standard used by NATO militaries for locating points on Earth. The MGRS is derived from the Universal Transverse Mercator (UTM) grid system and the Universal Polar Stereographic (UPS) grid system, but uses a different labeling convention. The MGRS is used as geocode for the entire Earth. Example of an milgrid coordinate, or grid reference, would be 4QFJ12345678, which consists of three parts: 4Q (grid zone designator, GZD) FJ (the 100,000-meter square identifier) 12345678 (numerical location; easting is 1234 and northing is 5678, in this case specifying a location with 10 m resolution).
        - `utm` string: Universal Transverse Mercator (UTM) grid coordinates. Pos. 1-2, UTM Zone Column [01-60 Pos. 3, UTM Zone Row [C-HJ-NP-X] Pos. 4, UTM False Easting [0-9] Pos. 5-9, UTM Meter Easting [0-9][0-9][0-9][0-9][0-9] Pos. 10-11, UTM False Northing [0-9][0-9] Pos. 12-16, UTM Meter Northing [0-9][0-9][0-9][0-9][0-9].
        - `airDefArea` string: Air Defense District (ADD) or Air Defense Area (ADA) in which the geographic coordinates reside.
        - `polSubdiv` string: Political subdivision in which the geographic coordinates reside. The specific usage and enumerations contained in this field may be found in the documentation provided in the referenceDoc field. If referenceDoc not provided, users may consult the data provider.
        - `symCode` string: A standard scheme for symbol coding enabling the transfer, display and use of symbols and graphics among information systems, as per MIL-STD 2525B, and supported by the element AFFILIATION.
        - `classRating` string: Indicates the importance of the operating unit to the OES or MIR system. This data element is restricted to update by DIA (DB-4). Valid values are: 0 - Does not meet criteria above 1 - Primary importance to system 2 - Secondary importance to system 3 - Tertiary importance to system O - Other. Explain in Remarks.
        - `recStatus` string: Validity and currency of the data in the record to be used in conjunction with the other elements in the record as defined by SOPs. Values are: A - Active I - Inactive K - Acknowledged L - Local Q - A nominated (NOM) or Data Change Request (DCR) record R - Production reduced by CMD decision W - Working Record.
        - `reviewDate` string, date: Date on which the data in the record was last reviewed by the responsible analyst for accuracy and currency. This date cannot be greater than the current date.
        - `resProd` string: Responsible Producer - Organization that is responsible for the maintenance of the record.
        - `referenceDoc` string: The reference documentiation that specifies the usage and enumerations contained in this record. If referenceDoc not provided, users may consult the data provider.
        - `operatingUnitRemarks` OperatingUnitRemarkFull[]: Remarks contain amplifying information for a specific service. The information may contain context and interpretations for consumer use.
          - `id` string: Unique identifier of the record, auto-generated by the system.
          - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
          - `idOperatingUnit` string, required: The ID of the operating unit to which this remark applies.
          - `altRmkId` string: Unique identifier of the unit remark record from the originating system.
          - `name` string: The name of the remark.
          - `type` string: The remark type (e.g. Caution, Information, Misc, Restriction, etc.).
          - `text` string, required: The text of the remark.
          - `code` string: The remark type identifier. For example, the Mobility Air Forces (MAF) remark code, defined in the Airfield Suitability and Restriction Report (ASRR).
          - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
          - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
          - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
          - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
          - `source` string, required: Source of the data.
          - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
          - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
        - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
        - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
        - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
        - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
        - `source` string, required: Source of the data.
        - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
        - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
        - `organization` OrganizationFull: An organization such as a corporation, manufacturer, consortium, government, etc. An organization may have parent and child organizations as well as link to a former organization if this org previously existed as another organization.
          - `id` string: Unique identifier of the record, auto-generated by the system.
          - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
          - `name` string, required: Organization name.
          - `type` string, required: Type of organization (e.g. GOVERNMENT, CORPORATION, CONSORTIUM, ACADEMIC).
          - `category` string: Subtype or category of the organization (e.g. Private company, stock market quoted company, subsidiary, goverment department/agency, etc).
          - `externalId` string: Optional externally provided identifier for this row.
          - `description` string: Organization description.
          - `countryCode` string: Country of the physical location of the organization. This value is typically the ISO 3166 Alpha-2 two-character country code. However, it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
          - `nationality` string: Country of registration or ownership of the organization. This value is typically the ISO 3166 Alpha-2 two-character country code, however it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
          - `active` boolean: Boolean indicating if this organization is currently active.
          - `source` string, required: Source of the data.
          - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
          - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
          - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
          - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
          - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
          - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
          - `organizationDetails` OrganizationDetailsFull[]: Read-only collection of additional OrganizationDetails by various sources for this organization, ignored on create/update. These details must be created separately via the /udl/organizationdetails operations.
            - `id` string: Unique identifier of the record, auto-generated by the system.
            - `idOrganization` string, required: Unique identifier of the parent organization.
            - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
            - `name` string, required: Organization details name.
            - `email` string: Listed contact email address for the organization.
            - `address1` string: Street number of the organization.
            - `address2` string: Field for additional organization address information such as PO Box and unit number.
            - `address3` string: Contains the third line of address information for an organization.
            - `geoAdminLevel1` string: Administrative boundaries of the first sub-national level. Level 1 is simply the largest demarcation under whatever demarcation criteria has been determined by the governing body. For example, this may be a state or province.
            - `geoAdminLevel2` string: Administrative boundaries of the second sub-national level. Level 2 is simply the second largest demarcation under whatever demarcation criteria has been determined by the governing body. For example, this may be a county or district.
            - `geoAdminLevel3` string: Administrative boundaries of the third sub-national level. Level 3 is simply the third largest demarcation under whatever demarcation criteria has been determined by the governing body. For example, this may be a city or township.
            - `postalCode` string: A postal code, such as PIN or ZIP Code, is a series of letters or digits or both included in the postal address of the organization.
            - `description` string: Organization description.
            - `formerOrgId` string: Former organization ID (if this organization previously existed as another organization).
            - `parentOrgId` string: Parent organization ID of this organization if it is a child organization.
            - `financialYearEndDate` string, date-time: For organizations of type CORPORATION, the effective financial year end date for revenue, EBITDA, and profit values.
            - `revenue` number, double: For organizations of type CORPORATION, total annual revenue as of financialYearEndDate in US Dollars.
            - `profit` number, double: For organizations of type CORPORATION, total annual profit as of financialYearEndDate in US Dollars.
            - `ebitda` number, double: For organizations of type CORPORATION, the company EBITDA value as of financialYearEndDate in US Dollars.
            - `ftes` integer: Total number of FTEs in this organization.
            - `broker` string: Designated broker for this organization.
            - `ceo` string: For organizations of type CORPORATION, the name of the Chief Executive Officer.
            - `cfo` string: For organizations of type CORPORATION, the name of the Chief Financial Officer.
            - `cto` string: For organizations of type CORPORATION, the name of the Chief Technology Officer.
            - `riskManager` string: The name of the risk manager for the organization.
            - `massRanking` integer: Mass ranking for this organization.
            - `revenueRanking` integer: Revenue ranking for this organization.
            - `financialNotes` string: For organizations of type CORPORATION, notes on company financials.
            - `servicesNotes` string: Notes on the services provided by the organization.
            - `fleetPlanNotes` string: Satellite fleet planning notes for this organization.
            - `source` string, required: Source of the data.
            - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
            - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
            - `tags` string[]: Optional array of provider/source specific tags for this data, where each element is no longer than 32 characters, used for implementing data owner conditional access controls to restrict access to the data. Should be left null by data providers unless conditional access controls are coordinated with the UDL team.
            - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
            - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
            - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
            - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
            - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
          - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
        - `location` LocationFull: Model representation of a location, which is a specific fixed point on the earth and is used to denote the locations of fixed sensors, operating units, etc.
          - `idLocation` string: Unique identifier of the location, auto-generated by the system.
          - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
          - `name` string, required: Location name.
          - `countryCode` string: The country code. This value is typically the ISO 3166 Alpha-2 two-character country code, however it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
          - `lat` number, double: WGS84 latitude of the location, in degrees. -90 to 90 degrees (negative values south of equator).
          - `lon` number, double: WGS84 longitude of the location, in degrees. -180 to 180 degrees (negative values west of Prime Meridian).
          - `altitude` number, double: Altitude of the location, in kilometers.
          - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
          - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
          - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
          - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
          - `source` string, required: Source of the data.
          - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
          - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
          - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
      - `idOperatingUnit` string: Unique identifier of the associated operating unit object.
      - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
      - `statusCollection` StatusFull[]: Read-only collection of statuses which can be collected by multiple sources.
        - `id` string: Unique identifier of the record, auto-generated by the system.
        - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
        - `derivedFrom` string: The sources or SCG references from which the classification of this data is derived.
        - `declassificationDate` string, date-time: The declassification date of this data, in ISO 8601 UTC format.
        - `declassificationString` string: Declassification string of this data.
        - `idEntity` string, required: Unique identifier of the parent entity.
        - `state` 'UNKNOWN' | 'DEAD' | 'ACTIVE' | 'RF ACTIVE' | 'STANDBY': Overall state of the entity, if applicable (e.g. UNKNOWN, DEAD, ACTIVE, RF ACTIVE, STANDBY).
        - `sysCap` 'FMC' | 'NMC' | 'PMC' | 'UNK': System capability of the entity, if applicable (e.g. FMC, NMC, PMC, UNK).
        - `opsCap` 'FMC' | 'NMC' | 'PMC' | 'UNK': Operation capability of the entity, if applicable (e.g. FMC, NMC, PMC, UNK).
        - `source` string, required: Source of the data.
        - `subStatusCollection` SubStatusFull[]
          - `id` string: Unique identifier of the record, auto-generated by the system.
          - `type` 'mwCap' | 'ssCap' | 'mdCap', required: Parent entity's sub-system or capability status: mwCap, mdCap, ssCap, etc.
          - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
          - `statusId` string, required: Id of the parent status.
          - `status` 'FMC' | 'NMC' | 'PMC' | 'UNK', required: Status of the sub-system/capability, e.g. FMC, NMC, PMC, UNK.
          - `notes` string, required: Descriptions and/or comments associated with the sub-status.
          - `source` string, required: Source of the data.
          - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
          - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
          - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
          - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
          - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
          - `updatedAt` string, date-time: Time the row was updated in the database, auto-populated by the system.
          - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
        - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
        - `notes` string: Comments describing the status creation and or updates to an entity.
        - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
        - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
        - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
        - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
        - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
        - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
      - `rfBands` RFBandFull[]: Read-only collection of RF bands utilized by this entity for communication and/or operation.
        - `id` string: Unique identifier of the record, auto-generated by the system.
        - `idEntity` string, required: Unique identifier of the parent Entity which uses this band.
        - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
        - `name` string, required: RF Band name.
        - `band` string: Name of the band of this RF range (e.g. X,K,Ku,Ka,L,S,C,UHF,VHF,EHF,SHF,UNK,VLF,HF,E,Q,V,W). See RFBandType for more details and descriptions of each band name.
        - `mode` 'TX' | 'RX': RF Band mode (e.g. TX, RX).
        - `purpose` 'COMM' | 'TTC' | 'OPS' | 'OTHER': Purpose or use of the RF Band -- COMM = communications, TTC = Telemetry/Tracking/Control, OPS = Operations, OTHER = Other.
        - `freqMin` number, double: Start/minimum of transmit RF frequency range, if applicable, in megahertz.
        - `freqMax` number, double: End/maximum of transmit RF frequency range, if applicable, in megahertz.
        - `centerFreq` number, double: Center frequency of RF frequency range, if applicable, in megahertz.
        - `peakGain` number, double: RF Range maximum gain, in decibel relative to isotrope.
        - `edgeGain` number, double: RF Range edge gain, in decibel relative to isotrope.
        - `bandwidth` number, double: RF Band frequency range bandwidth in megahertz.
        - `beamwidth` number, double: Angle between the half-power (-3 dB) points of the main lobe of the antenna, in degrees.
        - `polarization` 'H' | 'V' | 'R' | 'L': Transponder polarization e.g. H - (Horizontally Polarized) Perpendicular to Earth's surface, V - (Vertically Polarized) Parallel to Earth's surface, L - (Left Hand Circularly Polarized) Rotating left relative to the Earth's surface, R - (Right Hand Circularly Polarized) Rotating right relative to the Earth's surface.
        - `erp` number, double: Effective Radiated Power (ERP) is the total power in decibel watts radiated by an actual antenna relative to a half-wave dipole rather than a theoretical isotropic antenna. A half-wave dipole has a gain of 2.15 dB compared to an isotropic antenna. EIRP(dB) = ERP (dB)+2.15 dB or EIRP (W) = 1.64*ERP(W). Effective radiated power and effective isotropic radiated power both measure the amount of power a radio transmitter and antenna (or other source of electromagnetic waves) radiates in a specific direction: in the direction of maximum signal strength (the main lobe) of its radiation pattern.
        - `eirp` number, double: EIRP is defined as the RMS power input in decibel watts required to a lossless half-wave dipole antenna to give the same maximum power density far from the antenna as the actual transmitter. It is equal to the power input to the transmitter's antenna multiplied by the antenna gain relative to a half-wave dipole. Effective radiated power and effective isotropic radiated power both measure the amount of power a radio transmitter and antenna (or other source of electromagnetic waves) radiates in a specific direction: in the direction of maximum signal strength (the main lobe) of its radiation pattern.
        - `frequencySettings` number[]: Array of frequency settings, in megahertz for this RFBand. This array and the settings arrays must match in size.
        - `gainSettings` number[]: Array of gain settings, in decibels for this RFBand. If this array is specified then it must be the same size as the frequencySettings array. A null value may be used for one or more of the frequencies in the frequencySettings array if there is no corresponding value for a given frequency.
        - `delaySettings` number[]: Array of delay settings, in seconds for this RFBand. If this array is specified then it must be the same size as the frequencySettings array. A null value may be used for one or more of the frequencies in the frequencySettings array if there is no corresponding value for a given frequency.
        - `bandwidthSettings` number[]: Array of frequency range bandwidth settings, in megahertz for this RFBand. If this array is specified then it must be the same size as the frequencySettings array. A null value may be used for one or more of the frequencies in the frequencySettings array if there is no corresponding value for a given frequency.
        - `beamwidthSettings` number[]: Array of beamwidth settings, in degrees for this RFBand. If this array is specified then it must be the same size as the frequencySettings array. A null value may be used for one or more of the frequencies in the frequencySettings array if there is no corresponding value for a given frequency.
        - `noiseSettings` number[]: Array of signal noise settings, in decibels for this RFBand. If this array is specified then it must be the same size as the frequencySettings array. A null value may be used for one or more of the frequencies in the frequencySettings array if there is no corresponding value for a given frequency.
        - `source` string, required: Source of the data.
        - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
        - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
        - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
        - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
        - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
        - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
        - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
    - `antennas` OnorbitAntennaFull[]: Read-only collection of antennas on this on-orbit object.
      - `id` string: Unique identifier of the record, auto-generated by the system.
      - `idOnOrbit` string, required: ID of the on-orbit object.
      - `idAntenna` string, required: ID of the antenna.
      - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
      - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
      - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
      - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
      - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
      - `source` string, required: Source of the data.
      - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
      - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
      - `antenna` AntennaFull: Model representation of information on on-orbit/spacecraft communication antennas. A spacecraft may have multiple antennas and each antenna can have multiple 'details' records compiled by different sources.
        - `id` string: Unique identifier of the record, auto-generated by the system.
        - `name` string, required: Antenna name.
        - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
        - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
        - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
        - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
        - `source` string, required: Source of the data.
        - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
        - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
        - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
        - `antennaDetails` AntennaDetailsFull[]: Read-only collection of additional AntennaDetails by various sources for this organization, ignored on create/update. These details must be created separately via the /udl/antennadetails operations.
          - `id` string: Unique identifier of the record, auto-generated by the system.
          - `idAntenna` string, required: Unique identifier of the parent Antenna.
          - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
          - `type` string: Type of antenna (e.g. Reflector, Double Reflector, Shaped Reflector, Horn, Parabolic, etc.).
          - `position` string: Antenna position (e.g. Top, Nadir, Side).
          - `mode` 'TX' | 'RX': Antenna mode (e.g. TX,RX).
          - `steerable` boolean: Boolean indicating if this antenna is steerable.
          - `beamForming` boolean: Boolean indicating if this is a beam forming antenna.
          - `manufacturerOrgId` string: ID of the organization that manufactures the antenna.
          - `diameter` number, double: Antenna diameter in meters.
          - `size` number[]: Array with 1-2 values specifying the length and width (for rectangular) and just length for dipole antennas in meters.
          - `startFrequency` number, double: Antenna start of frequency range in Mhz.
          - `endFrequency` number, double: Antenna end of frequency range in Mhz.
          - `beamwidth` number, double: Array of angles between the half-power (-3 dB) points of the main lobe of the antenna, in degrees.
          - `gain` number, double: Antenna maximum gain in dBi.
          - `gainTolerance` number, double: Antenna gain tolerance in dB.
          - `polarization` number, double: Antenna polarization in degrees.
          - `description` string: Antenna description.
          - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
          - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
          - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
          - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
          - `source` string, required: Source of the data.
          - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
          - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
          - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
          - `tags` string[]: Optional array of provider/source specific tags for this data, where each element is no longer than 32 characters, used for implementing data owner conditional access controls to restrict access to the data. Should be left null by data providers unless conditional access controls are coordinated with the UDL team.
          - `manufacturerOrg` OrganizationFull: An organization such as a corporation, manufacturer, consortium, government, etc. An organization may have parent and child organizations as well as link to a former organization if this org previously existed as another organization.
            - `id` string: Unique identifier of the record, auto-generated by the system.
            - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
            - `name` string, required: Organization name.
            - `type` string, required: Type of organization (e.g. GOVERNMENT, CORPORATION, CONSORTIUM, ACADEMIC).
            - `category` string: Subtype or category of the organization (e.g. Private company, stock market quoted company, subsidiary, goverment department/agency, etc).
            - `externalId` string: Optional externally provided identifier for this row.
            - `description` string: Organization description.
            - `countryCode` string: Country of the physical location of the organization. This value is typically the ISO 3166 Alpha-2 two-character country code. However, it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
            - `nationality` string: Country of registration or ownership of the organization. This value is typically the ISO 3166 Alpha-2 two-character country code, however it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
            - `active` boolean: Boolean indicating if this organization is currently active.
            - `source` string, required: Source of the data.
            - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
            - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
            - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
            - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
            - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
            - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
            - `organizationDetails` OrganizationDetailsFull[]: Read-only collection of additional OrganizationDetails by various sources for this organization, ignored on create/update. These details must be created separately via the /udl/organizationdetails operations.
              - …
            - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
      - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
    - `batteries` OnorbitBatteryFull[]: Read-only collection of batteries on this on-orbit object.
      - `id` string: Unique identifier of the record, auto-generated by the system.
      - `idOnOrbit` string, required: ID of the on-orbit object.
      - `idBattery` string, required: ID of the battery.
      - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
      - `quantity` integer: The number of batteries on the spacecraft of the type identified by idBattery.
      - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
      - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
      - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
      - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
      - `source` string, required: Source of the data.
      - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
      - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
      - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
      - `battery` BatteryFull: Model representation of specific spacecraft battery types.
        - `id` string: Unique identifier of the record, auto-generated by the system.
        - `name` string, required: Battery name.
        - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
        - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
        - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
        - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
        - `source` string, required: Source of the data.
        - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
        - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
        - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
        - `batteryDetails` BatteryDetailsFull[]: Read-only collection of additional BatteryDetails by various sources for this organization, ignored on create/update. These details must be created separately via the /udl/batterydetails operations.
          - `id` string: Unique identifier of the record, auto-generated by the system.
          - `idBattery` string, required: Identifier of the parent battery type record.
          - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
          - `technology` string: Type of battery technology (e.g. Ni-Cd, Ni-H2, Li-ion, etc.).
          - `capacity` number, double: Battery capacity in Ah.
          - `dischargeDepth` number, double: Depth of discharge as a percentage/fraction.
          - `model` string: Battery model number or name.
          - `description` string: Battery description/notes.
          - `manufacturerOrgId` string: ID of the organization that manufactures the battery.
          - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
          - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
          - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
          - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
          - `source` string, required: Source of the data.
          - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
          - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
          - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
          - `tags` string[]: Optional array of provider/source specific tags for this data, where each element is no longer than 32 characters, used for implementing data owner conditional access controls to restrict access to the data. Should be left null by data providers unless conditional access controls are coordinated with the UDL team.
          - `manufacturerOrg` OrganizationFull: An organization such as a corporation, manufacturer, consortium, government, etc. An organization may have parent and child organizations as well as link to a former organization if this org previously existed as another organization.
            - `id` string: Unique identifier of the record, auto-generated by the system.
            - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
            - `name` string, required: Organization name.
            - `type` string, required: Type of organization (e.g. GOVERNMENT, CORPORATION, CONSORTIUM, ACADEMIC).
            - `category` string: Subtype or category of the organization (e.g. Private company, stock market quoted company, subsidiary, goverment department/agency, etc).
            - `externalId` string: Optional externally provided identifier for this row.
            - `description` string: Organization description.
            - `countryCode` string: Country of the physical location of the organization. This value is typically the ISO 3166 Alpha-2 two-character country code. However, it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
            - `nationality` string: Country of registration or ownership of the organization. This value is typically the ISO 3166 Alpha-2 two-character country code, however it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
            - `active` boolean: Boolean indicating if this organization is currently active.
            - `source` string, required: Source of the data.
            - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
            - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
            - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
            - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
            - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
            - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
            - `organizationDetails` OrganizationDetailsFull[]: Read-only collection of additional OrganizationDetails by various sources for this organization, ignored on create/update. These details must be created separately via the /udl/organizationdetails operations.
              - …
            - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
    - `solarArrays` OnorbitSolarArrayFull[]: Read-only collection of solar arrays on this on-orbit object.
      - `id` string: Unique identifier of the record, auto-generated by the system.
      - `idOnOrbit` string, required: ID of the on-orbit object.
      - `idSolarArray` string, required: ID of the SolarArray.
      - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
      - `quantity` integer: The number of solar arrays on the spacecraft of the type identified by idSolarArray.
      - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
      - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
      - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
      - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
      - `source` string, required: Source of the data.
      - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
      - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
      - `solarArray` SolarArrayFull: Model representation of information on on-orbit/spacecraft solar arrays. A spacecraft may have multiple solar arrays and each solar array can have multiple 'details' records compiled by different sources.
        - `id` string: Unique identifier of the record, auto-generated by the system.
        - `name` string, required: Solar Array name.
        - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
        - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
        - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
        - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
        - `source` string, required: Source of the data.
        - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
        - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
        - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
        - `solarArrayDetails` SolarArrayDetailsFull[]: Read-only collection of additional SolarArrayDetails by various sources for this organization, ignored on create/update. These details must be created separately via the /udl/solararraydetails operations.
          - `id` string: Unique identifier of the record, auto-generated by the system.
          - `idSolarArray` string, required: Unique identifier of the parent SolarArray.
          - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
          - `type` string: Type of solar array (e.g. U Shaped).
          - `technology` string: Solar array technology (e.g. Ga-As).
          - `junctionTechnology` string: Solar array junction technology (e.g. Triple).
          - `manufacturerOrgId` string: Unique identifier of the organization that manufactures the solar array.
          - `span` number, double: Solar Array span in meters.
          - `area` number, double: Solar Array area in square meters.
          - `description` string: Solar array description/notes.
          - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
          - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
          - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
          - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
          - `source` string, required: Source of the data.
          - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
          - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
          - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
          - `tags` string[]: Optional array of provider/source specific tags for this data, where each element is no longer than 32 characters, used for implementing data owner conditional access controls to restrict access to the data. Should be left null by data providers unless conditional access controls are coordinated with the UDL team.
          - `manufacturerOrg` OrganizationFull: An organization such as a corporation, manufacturer, consortium, government, etc. An organization may have parent and child organizations as well as link to a former organization if this org previously existed as another organization.
            - `id` string: Unique identifier of the record, auto-generated by the system.
            - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
            - `name` string, required: Organization name.
            - `type` string, required: Type of organization (e.g. GOVERNMENT, CORPORATION, CONSORTIUM, ACADEMIC).
            - `category` string: Subtype or category of the organization (e.g. Private company, stock market quoted company, subsidiary, goverment department/agency, etc).
            - `externalId` string: Optional externally provided identifier for this row.
            - `description` string: Organization description.
            - `countryCode` string: Country of the physical location of the organization. This value is typically the ISO 3166 Alpha-2 two-character country code. However, it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
            - `nationality` string: Country of registration or ownership of the organization. This value is typically the ISO 3166 Alpha-2 two-character country code, however it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
            - `active` boolean: Boolean indicating if this organization is currently active.
            - `source` string, required: Source of the data.
            - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
            - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
            - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
            - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
            - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
            - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
            - `organizationDetails` OrganizationDetailsFull[]: Read-only collection of additional OrganizationDetails by various sources for this organization, ignored on create/update. These details must be created separately via the /udl/organizationdetails operations.
              - …
            - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
      - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
    - `thrusters` OnorbitThrusterFull[]: Read-only collection of thrusters (engines) on this on-orbit object.
      - `id` string: Unique identifier of the record, auto-generated by the system.
      - `idOnOrbit` string, required: ID of the on-orbit object.
      - `idEngine` string, required: ID of the Engine.
      - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
      - `type` string: The type of thruster associated with this record (e.g. LAE, Hydrazine REA, etc.).
      - `quantity` integer: The number of engines/thrusters on the spacecraft of the type identified by idEngine.
      - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
      - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
      - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
      - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
      - `source` string, required: Source of the data.
      - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
      - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
      - `engine` EngineFull: Known launch vehicle engines and their performance characteristics and limits. A launch vehicle has 1 to many engines per stage.
        - `id` string: Unique identifier of the record, auto-generated by the system.
        - `name` string, required: Engine name/variant.
        - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
        - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
        - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
        - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
        - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
        - `source` string, required: Source of the data.
        - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
        - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
        - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
        - `engineDetails` EngineDetailsFull[]: Read-only collection of additional EngineDetails by various sources for this engine, ignored on create/update. These details must be created separately via the /udl/enginedetails operations.
          - `id` string: Unique identifier of the record, auto-generated by the system.
          - `idEngine` string, required: Identifier of the parent engine record.
          - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
          - `family` string: Engine type or family.
          - `cycleType` string: Engine cycle type (e.g. Electrostatic Ion, Pressure Fed, Hall, Catalytic Decomposition, etc.).
          - `characteristicType` string: Engine characteristic type (e.g. Electric, Mono-propellant, Bi-propellant, etc.).
          - `manufacturerOrgId` string: Organization ID of the engine manufacturer.
          - `specificImpulse` number, double: Launch engine specific impulse in seconds.
          - `burnTime` number, double: Launch engine maximum burn time in seconds.
          - `seaLevelThrust` number, double: Engine maximum thrust at sea level in Kilo-Newtons.
          - `vacuumThrust` number, double: Engine maximum thrust in a vacuum in Kilo-Newtons.
          - `chamberPressure` number, double: Engine chamber pressure in bars.
          - `nozzleExpansionRatio` number, double: Engine nozzle expansion ratio.
          - `maxFirings` integer: Engine maximum number of firings.
          - `propellant` string: Propellant/fuel type of the engine (e.g. Liquid Hydrogen, Kerosene, Aerozine, etc).
          - `oxidizer` string: Oxidizer type (e.g. Nitrogen Tetroxide, Liquid Oxygen, etc).
          - `notes` string: Notes/Description of the engine.
          - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
          - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
          - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
          - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
          - `source` string, required: Source of the data.
          - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
          - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
          - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
          - `tags` string[]: Optional array of provider/source specific tags for this data, where each element is no longer than 32 characters, used for implementing data owner conditional access controls to restrict access to the data. Should be left null by data providers unless conditional access controls are coordinated with the UDL team.
      - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
    - `onorbitDetails` OnorbitDetailsFull[]: Read-only collection of details for this on-orbit object.
      - `id` string: Unique identifier of the record, auto-generated by the system.
      - `idOnOrbit` string, required: UUID of the parent Onorbit record.
      - `classificationMarking` string, required: Classification marking of the data in IC/CAPCO Portion-marked format.
      - `lastObTime` string, date-time: Time of last reported observation for this object in ISO 8601 UTC with microsecond precision.
      - `vismag` number, double: Current/latest visual magnitude in M.
      - `vismagMin` number, double: Minimum visual magnitude in M.
      - `vismagMax` number, double: Maximum visual magnitude in M.
      - `vismagMean` number, double: Mean visual magnitude in M.
      - `rcs` number, double: Current/latest radar cross section in meters squared.
      - `rcsMin` number, double: Minimum radar cross section in meters squared.
      - `rcsMax` number, double: Maximum radar cross section in meters squared.
      - `rcsMean` number, double: Mean radar cross section in meters squared.
      - `bolDeltaV` number, double: The total beginning of life delta V of the spacecraft, in meters per second.
      - `maxDeltaV` number, double: Maximum delta V available for this on-orbit spacecraft, in meters per second.
      - `deltaVUnc` number, double: The 1-sigma uncertainty of the total spacecraft delta V, in meters per second.
      - `estDeltaVDuration` number, double: Estimated maximum burn duration for the object, in seconds.
      - `numMission` integer: The number of distinct missions the spacecraft performs.
      - `missionTypes` string[]: Array of the type of missions the spacecraft performs. Must contain the same number of elements as the value of numMission.
      - `busType` string: Type of the bus on the spacecraft.
      - `geoSlot` number, double: GEO slot if applicable, in degrees. -180 (West of Prime Meridian) to 180 degrees (East of Prime Meridian). Prime Meridian is 0.
      - `driftRate` number, double: GEO drift rate, if applicable in degrees per day.
      - `dryMass` number, double: Spacecraft dry mass (without fuel or disposables) in kilograms.
      - `additionalMass` number, double: Mass of fuel and disposables at launch time in kilograms.
      - `launchMassMin` number, double: Minimum (estimated) mass of spacecraft and fuel at launch time, in kilograms.
      - `launchMass` number, double: Nominal mass of spacecraft and fuel at launch time, in kilograms.
      - `launchMassMax` number, double: Maximum (estimated) mass of spacecraft and fuel at launch time, in kilograms.
      - `bolFuelMass` number, double: Spacecraft beginning of life fuel mass, in orbit, in kilograms.
      - `currentMass` number, double: The estimated total current mass of the spacecraft, in kilograms.
      - `totalMassUnc` number, double: The 1-sigma uncertainty of the total spacecraft mass, in kilograms.
      - `solarArrayArea` number, double: Spacecraft deployed area of solar array in meters squared.
      - `maneuverable` boolean: Boolean indicating whether a spacecraft is maneuverable. Note that a spacecraft may have propulsion capability but may not be maneuverable due to lack of fuel, anomalous condition, or other operational constraints.
      - `fuelRemaining` number, double: Estimated remaining fuel for the object in kilograms.
      - `crossSection` number, double: Average cross sectional area in meters squared.
      - `busCrossSection` number, double: Average cross sectional area of the bus in meters squared.
      - `maxRadius` number, double: Maximum dimension across the spacecraft (e.g., tip-to-tip across the solar panel arrays) in meters.
      - `colaRadius` number, double: Maximum dimension of the box circumscribing the spacecraft (d = sqrt(a*a + b*b + c*c) where a is the tip-to-tip dimension, b and c are perpendicular to that.) in meters.
      - `adeptRadius` number, double: The radius used for long-term debris environment projection analyses that is not as conservative as COLA Radius, in meters.
      - `numDeployable` integer: The number of sub-satellites or deployable objects on the spacecraft.
      - `depNames` string[]: Array of satellite deployable objects. Must contain the same number of elements as the value of numDeployable.
      - `depEstMasses` number[]: Array of the estimated mass of each deployable object, in kilograms. Must contain the same number of elements as the value of numDeployable.
      - `depMassUncs` number[]: Array of the 1-sigma uncertainty of the mass for each deployable object, in kilograms. Must contain the same number of elements as the value of numDeployable.
      - `refSource` string: The reference source, sources, or URL from which the data in this record was obtained.
      - `source` string, required: Source of the data.
      - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
      - `lastObSource` string: The name of the source who last provided an observation for this idOnOrbit.
      - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.
      - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
      - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
      - `updatedAt` string, date-time: Time the row was last updated in the database, auto-populated by the system.
      - `updatedBy` string: Application user who updated the row in the database, auto-populated by the system.
      - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
    - `countryCode` string: The country code. This value is typically the ISO 3166 Alpha-2 two-character country code, however it can also represent various consortiums that do not appear in the ISO document. The code must correspond to an existing country in the UDL’s country API. Call udl/country/{code} to get any associated FIPS code, ISO Alpha-3 code, or alternate code values that exist for the specified country code.
    - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
  - `createdAt` string, date-time: Time the row was created in the database, auto-populated by the system.
  - `createdBy` string: Application user who created the row in the database, auto-populated by the system.
  - `source` string, required: Source of the data.
  - `origin` string: Originating system or organization which produced the data, if different from the source. The origin may be different than the source if the source was a mediating system which forwarded the data on behalf of the origin system. If null, the source may be assumed to be the origin.
  - `origNetwork` string: The originating source network on which this record was created, auto-populated by the system.
  - `sourceDL` string: The source data library from which this record was received. This could be a remote or tactical UDL or another data library. If null, the record should be assumed to have originated from the primary Enterprise UDL.
  - `dataMode` 'REAL' | 'TEST' | 'SIMULATED' | 'EXERCISE', required: Indicator of whether the data is REAL, TEST, EXERCISE, or SIMULATED data: REAL: Data collected or produced that pertains to real-world objects, events, and analysis. TEST: Specific datasets used to evaluate compliance with specifications and requirements, and for validating technical, functional, and performance characteristics. EXERCISE: Data pertaining to a government or military exercise. The data may include both real and simulated data. SIMULATED: Synthetic data generated by a model to mimic real-world datasets.

## Other responses

- `400`: Bad Request
- `401`: Invalid/Missing User Credentials
- `403`: User Is Not Authorized
- `404`: Item Not Found
- `405`: Method Not Allowed
- `406`: MediaType Not Accepted by Request Headers
- `429`: Rate of Requests Exceeds Allowed Limit
- `500`: Internal Server Error

## Changes

> 12 revisions in range; 1 could not be searched.

- **2025-09-26** `45631f9bb3f0`: 7 info
  - added the optional property `onOrbit/entityCollection/items/rfBands/items/bandwidthSettings` to the response with the `200` status
  - added the optional property `onOrbit/entityCollection/items/rfBands/items/beamwidthSettings` to the response with the `200` status
  - added the optional property `onOrbit/entityCollection/items/rfBands/items/delaySettings` to the response with the `200` status
  - added the optional property `onOrbit/entityCollection/items/rfBands/items/frequencySettings` to the response with the `200` status
  - …3 more
- **2025-05-29** `4e1cbc17e814`: 1 warning, 2 info
  - added the new `LASEREMITTER` enum value to the `onOrbit/entityCollection/items/type` response property for the response status `200`
  - added the new optional `query` request parameter `firstResult`
  - added the new optional `query` request parameter `maxResults`
- **2025-04-16** `75f764c843a9`: 1 warning, 17 info
  - removed the optional property `onOrbit/entityCollection/items/onOrbit` from the response with the `200` status
  - api operation id `find_98` removed and replaced with ``
  - the endpoint scheme security `BasicAuth` was removed from the API
  - added the optional property `azimuthAngle` to the response with the `200` status
  - …14 more

[Operation history](https://skmtc.dev/bluestaq/apis/unified-data-library-services-api/changes/udl/sarobservation/:id/get.md)

---

[API](https://skmtc.dev/bluestaq/apis/unified-data-library-services-api.md) - [All operations](https://skmtc.dev/bluestaq/apis/unified-data-library-services-api/llms.txt) - [OpenAPI document](https://skmtc.dev/bluestaq/apis/unified-data-library-services-api/revisions/bd17bc53681e?raw)